Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Catalysis/catalysts carboxylates

As the experiments were carried out in unbuffered solution the significance of the observation (to which no further mechanistic inference was attached by the authors) is unclear. The hydrolysis of ethyl vinyl ether is, in fact, a well-studied reaction which is known to be subject to general acid catalysis by carboxylic acids [42] and was one of the substrates later selected by us to establish the possibility of general acid catalysis by solid catalysts. [Pg.423]

A number of studies of the acid-catalyzed mechanism of enolization have been done. The case of cyclohexanone is illustrative. The reaction is catalyzed by various carboxylic acids and substituted ammonium ions. The effectiveness of these proton donors as catalysts correlates with their pK values. When plotted according to the Bronsted catalysis law (Section 4.8), the value of the slope a is 0.74. When deuterium or tritium is introduced in the a position, there is a marked decrease in the rate of acid-catalyzed enolization h/ d 5. This kinetic isotope effect indicates that the C—H bond cleavage is part of the rate-determining step. The generally accepted mechanism for acid-catalyzed enolization pictures the rate-determining step as deprotonation of the protonated ketone ... [Pg.426]

Bifunctional catalysis in nucleophilic aromatic substitution was first observed by Bitter and Zollinger34, who studied the reaction of cyanuric chloride with aniline in benzene. This reaction was not accelerated by phenols or y-pyridone but was catalyzed by triethylamine and pyridine and by bifunctional catalysts such as a-pyridone and carboxylic acids. The carboxylic acids did not function as purely electrophilic reagents, since there was no relationship between catalytic efficiency and acid strength, acetic acid being more effective than chloracetic acid, which in turn was a more efficient catalyst than trichloroacetic acid. For catalysis by the carboxylic acids Bitter and Zollinger proposed the transition state depicted by H. [Pg.414]

Nitrilases catalyze the synthetically important hydrolysis of nitriles with formation of the corresponding carboxylic acids [4]. Scientists at Diversa expanded the collection of nitrilases by metagenome panning [56]. Nevertheless, in numerous cases the usual limitations of enzyme catalysis become visible, including poor or only moderate enantioselectivity, limited activity (substrate acceptance), and/or product inhibition. Diversa also reported the first example of the directed evolution of an enantioselective nitrilase [20]. An additional limitation had to be overcome, which is sometimes ignored, when enzymes are used as catalysts in synthetic organic chemistry product inhibition and/or decreased enantioselectivity at high substrate concentrations [20]. [Pg.39]

In general acid catalysis, the rate is increased not only by an increase in [SH ] but also by an increase in the concentration of other acids (e.g., in water by phenols or carboxylic acids). These other acids increase the rate even when [SH ] is held constant. In this type of catalysis the strongest acids catalyze best, so that, in the example given, an increase in the phenol concentration catalyzes the reaction much less than a similar increase in [H30 ]. This relationship between acid strength of the catalyst and its catalytic ability can be expressed by the Breasted catalysis equation ... [Pg.337]

The reaction between acyl halides and alcohols or phenols is the best general method for the preparation of carboxylic esters. It is believed to proceed by a 8 2 mechanism. As with 10-8, the mechanism can be S l or tetrahedral. Pyridine catalyzes the reaction by the nucleophilic catalysis route (see 10-9). The reaction is of wide scope, and many functional groups do not interfere. A base is frequently added to combine with the HX formed. When aqueous alkali is used, this is called the Schotten-Baumann procedure, but pyridine is also frequently used. Both R and R may be primary, secondary, or tertiary alkyl or aryl. Enolic esters can also be prepared by this method, though C-acylation competes in these cases. In difficult cases, especially with hindered acids or tertiary R, the alkoxide can be used instead of the alcohol. Activated alumina has also been used as a catalyst, for tertiary R. Thallium salts of phenols give very high yields of phenolic esters. Phase-transfer catalysis has been used for hindered phenols. Zinc has been used to couple... [Pg.482]

The scope of this reaction is similar to that of 10-21. Though anhydrides are somewhat less reactive than acyl halides, they are often used to prepare carboxylic esters. Acids, Lewis acids, and bases are often used as catalysts—most often, pyridine. Catalysis by pyridine is of the nucleophilic type (see 10-9). 4-(A,A-Dimethylamino)pyridine is a better catalyst than pyridine and can be used in cases where pyridine fails. " Nonbasic catalysts are cobalt(II) chloride " and TaCls—Si02. " Formic anhydride is not a stable compound but esters of formic acid can be prepared by treating alcohols " or phenols " with acetic-formic anhydride. Cyclic anhydrides give monoesterified dicarboxylic acids, for example,... [Pg.483]

In either the acid catalysis or the niekel carbonyl (or other metallic catalyst) method, if alcohols, thiols, amines, etc. are used instead of water, the product is the corresponding ester, thiol ester, or amide, instead of the carboxylic acid. [Pg.1037]

Although the use of phase-transfer catalysis (PTC) for manufacturing esters has the merits of a mild reaction condition and a relatively low cost [1], PTC has its limitations, such as the low reactivity of carboxylic ion by liquid-liquid PTC [2], a slow reaction rate by solid-liquid PTC, and the difflculty of reusing the catalyst by both techniques. [Pg.181]

Barium oxide and sodium hydride are more potent catalysts than silver oxide. With barium oxide catalysis, reactions occur more rapidly but O-acetyl migration is promoted. With sodiun hydride, even sterically hindered groups may be quantitatively alkylated but unwanted C-alkylation Instead of, or in addition to, 0-alkylatlon is a possibility. Sodium hydroxide is a suitable catalyst for the alkylation of carboxylic acids and alcohols [497J. [Pg.437]

A different type of catalysis is observed using proline as a catalyst.166 Proline promotes addition of acetone to aromatic aldehydes with 65-77% enantioselectivity. It has been suggested that the carboxylic acid functions as an intramolecular proton donor and promotes reaction through an enamine intermediate. [Pg.131]

There is little doubt that the zinc ion acts as an electrophilic catalyst to polarize the carbonyl group and stabilize the negative charge that develops on the oxygen (Chapter 2, section B7).151 The ionized carboxylate of Glu-270 is impli-cated in catalysis from the pH-rate profile.152... [Pg.1]

The intermediate N-acylpyridinium salt is highly stabilized by the electron donating ability of the dimethylamino group. The increased stability of the N-acylpyridinium ion has been postulated to lead to increased separation of the ion pair resulting in an easier attack by the nucleophile with general base catalysis provided by the loosely bound carboxylate anion. Dialkylamino-pyridines have been shown to be excellent catalysts for acylation (of amines, alcohols, phenols, enolates), tritylation, silylation, lactonization, phosphonylation, and carbomylation and as transfer agents of cyano, arylsulfonyl, and arylsulfinyl groups (lj-3 ). [Pg.73]

Catalysis in Transacylation Reactions. The principal objective of the study was to evaluate 4 as an effective organic soluble lipophilic catalyst for transacylation reactions of carboxylic and phosphoric acid derivatives in aqueous and two-phase aqueous-organic solvent media. Indeed 4 catalyzes the conversion of benzoyl chloride to benzoic anhydride in well-stirred suspensions of CH2CI2 and 1.0 M aqueous NaHCC>3 (Equations 1-3). The results are summarized in Table 1 where yields of isolated acid, anhydride and recovered acid chloride are reported. The reaction is believed to involve formation of the poly(benzoyloxypyridinium) ion intermediate (5) in the organic phase (Equation 1) and 5 then quickly reacts with bicarbonate ion and/or hydroxide ion at the interphase to form benzoate ion (Equation 2 and 3). Apparently most of the benzoate ion is trapped by additional 5 in the organic layer or at the interphase to produce benzoic anhydride (Equation 4), an example of normal phase-... [Pg.205]

Ethyl diazopyruvate, under copper catalysis, reacts with alkynes to give furane-2-carboxylates rather than cyclopropenes u3) (Scheme 30). What looks like a [3 + 2] cycloaddition product of a ketocarbenoid, may actually have arisen from a primarily formed cyclopropene by subsequent copper-catalyzed ring enlargement. Such a sequence has been established for the reaction of diazoacetic esters with acetylenes in the presence of certain copper catalysts, but metallic copper, in these cases, was not able to bring about the ring enlargement14). Conversely, no cyclopropene derivative was detected in the diazopyruvate reaction. [Pg.175]

As with carboxylic acids obtained by palladium hydroxycarbonylation, their derivatives esters, amides, anhydrides and acyl halides are synthesized from alkenes, CO and HX (X = OR, NR2 etc.). The Pd-catalyzed methoxycarbonylation is one of the most studied reactions among this type of catalyzed carbonylations and has been reviewed and included in reports of homogeneous catalysis.625, 26 The methoxycarbonylation has been applied to many different substrates to obtain intermediates in organic syntheses as well as specific products. For instance, the reaction has been applied for methoxycarbonylation of alkynes666 Highly efficient homogeneous Pd cationic catalysts have been reported and the methoxycarbonylation of alkynes has been used to develop economically attractive and environmentally benign process for the production of methyl... [Pg.191]

Cobaloxime(I) generated by the electrochemical reductions of cobaloxime(III), the most simple model of vitamin Bi2, has been shown to catalyze radical cyclization of bromoacetals.307 Cobalt(I) species electrogenerated from [ConTPP] also catalyze the reductive cleavage of alkyl halides. This catalyst is much less stable than vitamin Bi2 derivatives.296 It has, however, been applied in the carboxylation of benzyl chloride and butyl halides with C02.308 Heterogeneous catalysis of organohalides reduction has also been studied at cobalt porphyrin-film modified electrodes,275,3 9-311 which have potential application in the electrochemical sensing of pollutants. [Pg.489]


See other pages where Catalysis/catalysts carboxylates is mentioned: [Pg.145]    [Pg.386]    [Pg.117]    [Pg.7184]    [Pg.156]    [Pg.93]    [Pg.498]    [Pg.170]    [Pg.457]    [Pg.98]    [Pg.68]    [Pg.75]    [Pg.132]    [Pg.162]    [Pg.488]    [Pg.326]    [Pg.212]    [Pg.228]    [Pg.386]    [Pg.945]    [Pg.38]    [Pg.40]    [Pg.114]    [Pg.146]    [Pg.147]   
See also in sourсe #XX -- [ Pg.225 , Pg.233 ]




SEARCH



Carboxyl Catalyst

Carboxylation catalysts

Catalysts catalysis

© 2024 chempedia.info