Thermal decomposition carbonyl

If the metal in the precursor is zerovalent, such as in carbonyls, thermal decomposition initially leads to formation of the metal, but two-step procedures can be used to produce oxide nanoparticles as well [30]. In a related work, the synthesis of highly crystalline and monodisperse y-Fe Oj nanocrystallites is reported. High-temperature (300°C) aging of iron-oleic acid metal complex, which was prepared by the thermal decomposition of iron pentacarbonyl in the presence of oleic acid at 100°C, was found to generate monodisperse iron nanoparticles [31]. 

The thermal decomposition of thia2ol-2-yl-carbonyl peroxide in benzene, bromobenzene, or cumene affords thiazole together with good yields of 2-arylthiazoles but negligible amounts of esters. Thiazol-4-ylcarbonyl peroxide gives fair yields of 4-arylthiazoles, but the phenyl ester is also a major product in benzene, indicating reactions of both thiazol-4-yl radicals and thiazol-4-carbonyloxy radicals. Thiazole-5-carbonyl peroxide gives... 

Synthesis gas is obtained either from methane reforming or from coal gasification (see Coal conversion processes). Telescoping the methanol carbonylation into an esterification scheme furnishes methyl acetate directly. Thermal decomposition of methyl acetate yields carbon and acetic anhydride,... 

Excitation appears to be general for this reaction but yields of excited products vary substantially with the substituent R. The highest yield reported is from tetramethyl-l,2-dioxetane [35856-82-7] (TMD) where the yield of triplet acetone is 50% of total acetone formed (18,19). Probably only one carbonyl of the two produced can be excited by the thermal decomposition, and TMD provides 100% of the possible yield of triplet acetone. Singlet excited acetone is also formed, but at the low yield of 0.1—0.3% (17—21). Other tetraaLkyldioxetanes behave similarly to TMD (22). 

Miscellaneous. Electron beams can be used to decompose a gas such as silver chloride and simultaneously deposit silver metal. An older technique is the thermal decomposition of volatile and extremely toxic gases such as nickel carbonyl [13463-39-3] Ni(CO)4, to form dense deposits or dendritic coatings by modification of coating parameters. 

Thermal decomposition of dihydroperoxides results in initial homolysis of an oxygen—oxygen bond foUowed by carbon—oxygen and carbon—carbon bond cleavages to yield mixtures of carbonyl compounds (ketones, aldehydes), esters, carboxyHc acids, hydrocarbons, and hydrogen peroxide. 

Thermal decomposition of hydroxyalkyl hydroperoxyalkyl peroxides produces mixtures of starting carbonyl compounds, mono- and dicarboxyHc acids, cycHc diperoxides, carbon dioxide, and water. One specific hydroxyalkyl hydroperoxyalkyl peroxide from cyclohexanone (2, X = OH, Y = OOH) is a soHd that is produced commercially as a free-radical initiator and bleaching agent (see Table 5). On controlled decomposition, it forms 1,12-dodecanedioic acid (150). 

The heavy metal salts, ia contrast to the alkah metal salts, have lower melting points and are more soluble ia organic solvents, eg, methylene chloride, chloroform, tetrahydrofiiran, and benzene. They are slightly soluble ia water, alcohol, ahphatic hydrocarbons, and ethyl ether (18). Their thermal decompositions have been extensively studied by dta and tga (thermal gravimetric analysis) methods. They decompose to the metal sulfides and gaseous products, which are primarily carbonyl sulfide and carbon disulfide ia varying ratios. In some cases, the dialkyl xanthate forms. Solvent extraction studies of a large number of elements as their xanthate salts have been reported (19). 

Easily decomposed, volatile metal carbonyls have been used in metal deposition reactions where heating forms the metal and carbon monoxide. Other products such as metal carbides and carbon may also form, depending on the conditions. The commercially important Mond process depends on the thermal decomposition of Ni(CO)4 to form high purity nickel. In a typical vapor deposition process, a purified inert carrier gas is passed over a metal carbonyl containing the metal to be deposited. The carbonyl is volatilized, with or without heat, and carried over a heated substrate. The carbonyl is decomposed and the metal deposited on the substrate. A number of papers have appeared concerning vapor deposition techniques and uses (170—179). 

Traditionally, pure CO is not used industrially water gas or producer gas are used instead. However, pure CO is made by thermal decomposition of nickel carbonyl ... 

The nitrites aie most conveniently prepared from the corresponding alcohols by treatment with nitrosyl chloride in pyridine. The crude nitrites can be precipitated by addition of water and recrystallized from appropriate solvents. However nitrites prepared from carbinols in which the adjacent carbon is substituted by halogen, free or esterified hydroxyl or a carbonyl function are very readily hydrolyzed and must be recrystallized with great care. In general the photolysis gives higher yields if purified and dried nitrites are used which do not contain acids or pyridine, although occasionally the addition of small amounts of pyridine is recommended in order to prevent hydrolysis of the nitrite. Traces of acids do in fact catalyze the thermal decomposition of secondary nitrites to equimolar amounts of alcohol and ketone. ... 

Thermal decomposition is a major route to smaller perfluonnated molecules Tetrafluoroethylene pyrolyzed at 1100-1300 °C with carbon dioxide gives a mixture of tetrafluoromethane (19 9%), hexafluoroethane (61 3%), and carbonyl fluoride (18 6%) [87]... 

Owen, L. W., Observations on the Process ofNickel Deposition by Thermal Decomposition ofNickel Carbonyl at Low Pressure, Metallurgia,p. 165-173 (April 1959)... 

Recent work on [CpFe(CO)2]2 was intended to test whether once again a complex molecule could be found to have a high yield and also to test a possible preferential formation of metal carbonyls over metal sandwich compounds. In this compound, thermal decomposition of the starting compound gives rise predominantly to ferrocene (28, 68). The data (50) given in Table VIII show that indeed the carbonyl is preferentially formed... 

Metallic powders are made several different ways. They can be prepared by reducing salts in a stream of a reducing gas, such as hydrogen chlorides of metals are commonly used but oxides are used too. Thermal decomposition in a vacuum of metal carbonyls or metal salts of organic acids, such as formates, produces metal powders. Surface areas of such powders are around 1.5 m2/g. Powders can also be made from electrolytic reduction of salts in organic solvents and by atomization of the metal. 

Metal carbonyl compounds are other suitable precursors for the synthesis of NPs by thermal decomposition. The main advantage is the formation of CO that is expelled from the IL phase due to its poor solubility. However, high temperatures are commonly used to decompose such precursors. Metal NPs of Cr(0), Mo(0), and W(0) were prepared by thermal or photolytic decomposition of their respective monometallic carbonyl compounds [M(CO)6] dispersed in ILs [52]. Similarly, the precursors [Fe2(CO)9], [Ru3(CO)i2], and [Os3(CO)12] were employed in order to obtain stable metal NPs (1.5-2.5 nm) in BMI.BF4 [53]. The same procedure was extended to the preparation of lr(0), Rh(0), and Co(0) NPs in ILs [54]. 

Garratt and Thompson [J. Chem. Soc., 1934, 524, 1817, 1822] have studied the photochemical and thermal decomposition of nickel tetra-carbonyl. Later work by Day, Pearson and Basolo [J. Am. Chem. Soc., 90 (6933), 1968] confirmed that the rate law postulated by Garratt and Thompson was obeyed for the homogeneous process. The mechanism postulated by both groups is ... 

Methods have been described that involve microwave-assisted graphite-supported dry media for the cycloaddition of anthracene, 1-azadienes and 1,2,4,5-tetrazines with several C-C dienophiles and carbonyl compounds in hetero-Diels-Alder reactions [35], This technique leads to a shortening of reaction times, a situation that enables work to be undertaken at ambient pressure in an open reactor to avoid the formation of unwanted compounds by thermal decomposition of reagents or products. 

The mode of reaction of titanacydobutenes with carbonyl compounds is largely dependent on steric factors (Scheme 14.31) [72]. Ketones and aldehydes tend to insert into the titanium—alkyl bond of 2,3-diphenyltitanacydobutene, and homoallylic alcohols 70 are obtained by hydrolysis of the adducts 71 [65a,73]. On the contrary, when dialkyl-substi-tuted titanacydobutenes are employed, the reaction with aldehydes preferentially proceeds through insertion into the titanium—vinyl bond. Thermal decomposition of the adducts 72 affords conjugated dienes 73 with E-stereoselectivity as a result of a concerted retro [4+2] cycloaddition [72]. 

The present paper focuses on the interactions between iron and titania for samples prepared via the thermal decomposition of iron pentacarbonyl. (The results of ammonia synthesis studies over these samples have been reported elsewhere (4).) Since it has been reported that standard impregnation techniques cannot be used to prepare highly dispersed iron on titania (4), the use of iron carbonyl decomposition provides a potentially important catalyst preparation route. Studies of the decomposition process as a function of temperature are pertinent to the genesis of such Fe/Ti02 catalysts. For example, these studies are necessary to determine the state and dispersion of iron after the various activation or pretreatment steps. Moreover, such studies are required to understand the catalytic and adsorptive properties of these materials after partial decomposition, complete decarbonylation or hydrogen reduction. In short, Mossbauer spectroscopy was used in this study to monitor the state of iron in catalysts prepared by the decomposition of iron carbonyl. Complementary information about the amount of carbon monoxide associated with iron was provided by volumetric measurements. 

---