Carbon monoxide 5+1 cycloaddition reactions

The further reaction patterns of 1,4-dicopper-l,3-butadienes 54 were expanded by investigation of the annulation of 54 with carbon monoxide. This reaction led to cycloaddition reaction and afforded expected cyclopentadienones 20 as well as the... 

If the reaction temperature is raised to 430 K and the carbon monoxide pressure to 3 atm, coordination of the metal atom in the rearranged product occurs via the phosphorus site, as in 159 (M = Cr, Mo, W) [84JOM(263)55]. Along with this product (M = W) at 420 K, formation of the dimer of 5-phenyl-3,4-dimethyl-2//-phosphole, 160 (the a complex), is possible as a consequence of [4 - - 2] cycloaddition reactions. Chromium hexacarbonyl in turn forms phospholido-bridged TiyP)-coordinatedcomplex 161. At 420 K in excess 2,3-dimethylbutadiene, a transformation 162 163 takes place (82JA4484). 

The reaction of an alkyne 1 and an alkene 2 in the presence of dicobaltoctacar-bonyl to yield a cyclopentenone 3 is referred to as the Pauson-Khand reaction Formally it is a [2 + 2 + 1 ]-cycloaddition reaction. The dicobaltoctacarbonyl acts as coordinating agent as well as a source of carbon monoxide. 

Interestingly, in the inverse-electron-demand Diels-Alder reactions of oxepin with various enophiles such as cyclopentadienones and tetrazines the oxepin form, rather than the benzene oxide, undergoes the cycloaddition.234 236 Usually, the central C-C double bond acts as dienophile. Oxepin reacts with 2,5-dimethyl-3,4-diphenylcyclopenta-2,4-dienone to give the cycloadduct 6 across the 4,5-C-C double bond of the heterocycle.234 The adduct resists thermal carbon monoxide elimination but undergoes cycloreversion to oxepin and the cyclopenta-dienone.234... 

Benzannulated azocines can be prepared starting from 4-phenyl-l,2.3-benzotriazine (16), flash-vacuum pyrolysis of which leads to 2-phenylbenzazete (17) (cf. Houben-Weyl. Vol. E16c, p 939), which is stable until about 40 °C and easily enters into cycloaddition reactions with dienes. With tetraphenylcyclopentadienone, a nonisolable adduct is formed which, by loss of carbon monoxide, gives an azabicyclo[4.2.0]octatriene derivative that isomerizes to the 1 -benzazocine 18.22... 

Aryl- and alkenylcarbene complexes are known to react with alkynes through a [3C+2S+1C0] cycloaddition reaction to produce benzannulated compounds. This reaction, known as the Dotz reaction , is widely reviewed in Chap. Chromium-Templated Benzannulation Reactions , p. 123 of this book. However, simple alkyl-substituted carbene complexes react with excess of an alkyne (or with diynes) to produce a different benzannulated product which incorporates in its structure two molecules of the alkyne, a carbon monoxide ligand and the carbene carbon [128]. As referred to before, this [2S+2SH-1C+1C0] cycloaddition reaction can be carried out with diyne derivatives, showing these reactions give better yields than the corresponding intermolecular version (Scheme 80). 

The Pauson-Khand reaction (PKR) [96] consists of the synthesis of cyclopen-tenones by reaction of an alkene with a dicobalthexacarbonyl complexed alkyne (Scheme 57) and has recently emerged as one of the methods of choice for the obtainment of five-membered carbocyclic rings [97]. Its unique atom connectivity, which involves the two unsaturated carbons of the reagents and the carbon atom of a carbon monoxide ligand of cobalt usually in a regioselective manner (Scheme 57), has brought to refer to PKR as a [2 -I- 2 + 1] cycloaddition. 

The [2+2+1] cycloaddition of an alkene, an alkyne, and carbon monoxide is known as the Pauson-Khand reaction and is often the method of choice for the preparation of complex cyclopentenones [155]. Groth and coworkers have demonstrated that Pauson-Khand reactions can be carried out very efficiently under microwave heating conditions (Scheme 6.75 a) [156]. Taking advantage of sealed-vessel technology, 20 mol% of dicobalt octacarbonyl was found to be sufficient to drive all of the studied Pauson-Khand reactions to completion, without the need for additional carbon monoxide. The carefully optimized reaction conditions utilized 1.2 equivalents of... 

An Rh-catalyzed [4+1 -cycloaddition reaction of vinylallenes with carbon monoxide provies an efficient synthetic method for cross-conjugated cydopentenones (Scheme 16.40) [39, 40]. 

Abstract The transition metal mediated conversion of alkynes, alkenes, and carbon monoxide in a formal [2 + 2+1] cycloaddition process, commonly known as the Pauson-Khand reaction (PKR), is an elegant method for the construction of cyclopentenone scaffolds. During the last decade, significant improvements have been achieved in this area. For instance, catalytic PKR variants are nowadays possible with different metal sources. In addition, new asymmetric approaches were established and the reaction has been applied as a key step in various total syntheses. Recent work has also focused on the development of CO-free conditions, incorporating transfer carbonylation reactions. This review attempts to cover the most important developments in this area. 

An important procedure for the synthesis of cyclopentenones is the so-called Pauson-Khand reaction, which constitutes a formal [2 + 2 + 1] cycloaddition of an alkene, an alkyne, and carbon monoxide. Due to the increase in structural diversity of the available starting materials, the reaction has become an attractive target for scientific investigations [1-8]. The first successful example was reported by Pauson, Khand et al [9] in 1973 for the conversion of norbornene with the phenylacetylene-hexacarbonyldicobalt complex to give the corresponding cyclopentenone in 45% yield (Eq. 1). 

Cobalt, as its CpCo(CO)2 complex, has proven to be especially suited to catalyze [2 + 2 + 2] cycloadditions of two alkyne units with an alkyne or alkene. These cobalt-mediated [2 + 2 + 2] cycloaddition reactions have been studied in great detail by Vollhardt337. The generally accepted mechanism for these cobalt mediated cycloadditions, and similar transition metal mediated cycloadditions in general, has been depicted in equation 166. Consecutive co-ordination of two triple bonds to CpCo(CO)2 with concomitant extrusion of two molecules of carbon monoxide leads to intermediates 578 and 579 via monoalkyne complex 577. These react with another multiple bond to form intermediate 580. The conversion of 578 to 580 is said to be kinetically favored over that of 579 to 580. Because intermediates like 580 have never been isolated, it is still unclear whether the next step is a Diels-Alder reaction to form the final product or an insertion to form 581. The exact circumstances might determine which pathway is followed. 

However, a crucial difference was seen in analogous reactions with the (tert-butyl)alkynylcarbene complex 184.a, carried out under a pressure of carbon monoxide. A [4 + 2] cycloaddition takes place, but in this case the ene fragment is not the alkyne functionality, but the carbene-alkyne bond. The mechanism presented by Park implies that this is due to the preliminary... 

The growth step procedures for the cycloaddition reaction are very simple. Combination of an ethynyl-substituted dendrimer and an excess of the cyclo-pentadienone in a refluxing solvent such as o-xylene, diphenylether, or methyl-naphthalene (with b.p. higher than 130 °C) typically results in quantitative conversion within 24 h. The refluxing of the solvent is necessary to accelerate the elimination of the carbon monoxide in the cycloaddition. The purity of the resulting compounds was checked by MALDI-TOF mass spectrometry which showed quantitative reaction, facilitating work-up. By repeated precipitation in methanol, the pure product can be isolated as white amorphous powders in yields higher than 90%. 

The intramolecular 2 - - 2 - - 1-cycloadditions of allene, alkyne (106), and carbon monoxide yield a -methylene-(107) or 4-alkylidene-cyclopentenones (108) depending on the allene structure or the reaction conditions (Scheme 4i).i59.i6o The cobalt-catalysed 4 - - 2 - - 2-cycloaddition of norbornadienes (109) with buta-1,3-dienes readily produces cycloadducts (110) when a bimetal system is used (Scheme A2) ... 

Khand and Pauson reported a Co-mediated intermolecular [2-I-2-I-1] cycloaddition of an alkyne, an alkene and carbon monoxide (the Pauson-Khand reaction) [4, 26] wherein an alkyne-Co2(CO)6 complex, which had been prepared from Co2(CO)g... 

Transition-metal-promoted cycloaddition is of much interest as a powerful tool for synthesis of carbocyclic stmcture in a single step. Utilization of carbon monoxide as a component of the cycloaddition reaction is now widely known as the Pauson-Khand reaction, which results in cyclopentenone formation starting from an alkyne, an alkene, and carbon monoxide mediated by cobalt catalyst. Although mechanistic understanding is limited, a commonly accepted mechanism is shown in Scheme 4.16. Formation of dicobalt-alkyne complex followed by alkene... 

The [2+2+1] cycloaddition of an alkene, an alkyne and carbon monoxide is commonly known as the Pauson-Khand reaction. This transformation has been adopted many times in the synthesis of complex natural products and related compounds, which contain a cyclopentenone moiety, for example, prostaglandins. Two independent reports of this reaction appeared almost simultaneously in late 2002 by Iqbal and co-workers25 and Fisher and co-workers26, respectively. They not only used very similar substrate systems in their studies, but they also reached very similar conclusions Toluene was found to be the preferred solvent in this reaction, even though it is a very poor microwave absorber. A reaction time between 5 and 10 min, using dicob alto ctacar-bonyl or dicobalthexacarbonyl as the carbon monoxide source, and a temperature of 100-120°C resulted in high yields of the products. Fisher and co-workers used 20 mol% Co2(CO)8 and cyclohexylamine as an additive (Scheme 5.12), since this system had been used previously in order to allow a catalytic reaction. Iqbal and co-workers did not use cyclohexylamine, but instead used 1 equiv. of the carbon monoxide (Co2(CO)6) source. In both reports, the products were formed in 40-70% yield. 

The reaction of two alkynes in the presence of pentacarbonyliron affords via a [2 + 2 + 1]-cycloaddition tricarbonyl(ri4-cyclopentadienone)iron complexes (Scheme 1.6) [5, 21-23]. An initial ligand exchange of two carbon monoxide ligands by two alkynes generating a tricarbonyl[bis(ri2-alkyne)]iron complex followed by an oxidative cyclization generates an intermediate ferracyclopentadiene. Insertion of carbon monoxide and subsequent reductive elimination lead to the tricarbonyl(T 4-cyclopentadienone)iron complex. These cyclopentadienone-iron complexes are fairly stable but can be demetallated to their corresponding free ligands (see Section 1.2.2). The [2 + 2 + l]-cycloaddition requires stoichiometric amounts of iron as the final 18-electron cyclopentadienone complex is stable under the reaction conditions. 

The iron-mediated [2 + 2 + 1]-cycloaddition to cyclopentadienones has been successfully applied to the synthesis of corannulene [24] and the yohimbane alkaloid ( )-demethoxycarbonyldihydrogambirtannine [25]. A [2 + 2 + l]-cydoaddition of an alkene, an alkyne and carbon monoxide mediated by pentacarbonyliron, related to the well-known Pauson-Khand reaction [26], has also been described to afford cyclopentenones [27]. 

The Pauson-Khand Reaction is a [2+2+1] cycloaddition of an alkyne, an alkene and carbon monoxide. 

A ruthenium-promoted carbonylation of allenyl alcohols 884 is a powerful method for the synthesis of 5,6-dihydropyran-2-ones 885 (Equation 356) <20000L441, 2003JOC8571>. Co2(CO)6-mediated tandem [5+1]/ [2+2+1] cycloaddition reactions of the epoxide 886 with carbon monoxide provide a one-pot synthesis of tricyclic 5,6-dihydropyran-2-ones 887 in good yield (Equation 357) <2003JA9610>. 

Formation of the complexes 47c, 47e, and 47t and their smooth reaction with carbon monoxide sheds some light on the mechanism of [6 + 4] cycloaddition in the coordination sphere of chromium. Obviously, the photoreaction proceeds stepwise. First, the diene is coordinated to an activated complex (45) and forms tricarbonyl-t/4-8,8-dimethylheptafulvene-t/2-... 

Murakami and Ito have highlighted the utility of cationic Me-DuPhos-Rh catalysts for novel asymmetric (4 + 1) cycloaddition reactions between vinylallenes and carbon monoxide.68 Complex cyclopentenone derivatives such as 64 have been constructed in a single step and with enantiose-lectivities up to 95% in this process (Scheme 13.22). 

Nadal and colleagues recently reported a Ni-catalyzed carbonylative Pauson-Khand-like [2+2+1] cycloaddition of allyl halides and alkynes in the presence of carbon monoxide and iron as the stoichiometric reducing agent [148]. The reaction was proposed to occur via reductively generated Ni(I)-radical like species free radicals were, however, considered unlikely. 

---