Discovery carbon

The discovery of perfect geodesic dome closed structures of carbon, such as C o has led to numerous studies of so-called Buckminster fullerene. Dislocations are important features of the structures of nested fullerenes also called onion skin, multilayered or Russian doll fullerenes. A recent theoretical study [118] shows that these defects serve to relieve large inherent strains in thick-walled nested fullerenes such that they can show faceted shapes. 

Latin carbo, charcoal) Carbon, an element of prehistoric discovery, is very widely distributed in nature. It is found in abundance in the sun, stars, comets, and atmospheres of most planets. Carbon in the form of microscopic diamonds is found in some meteorites. 

Manganese minerals are widely distributed oxides, silicates, and carbonates are the most common. The discovery of large quantities of manganese nodules on the floor of the oceans may become a source of manganese. These nodules contain about 24% manganese together with many other elements in lesser abundance. 

The discovery of a significant number of hypercoordinate carboca-tions ( nonclassical ions), initially based on solvolytic studies and subsequently as observable, stable ions in superacidic media as well as on theoretical calculations, showed that carbon hypercoordination is a general phenomenon in electron-deficient hydrocarbon systems. Some characteristic nonclassical carbocations are the following. 

Thus far the importance of carbon cluster chemistry has been in the discovery of new knowl edge Many scientists feel that the earliest industrial applications of the fullerenes will be based on their novel electrical properties Buckminsterfullerene is an insulator but has a high electron affinity and is a superconductor in its reduced form Nanotubes have aroused a great deal of interest for their electrical properties and as potential sources of carbon fibers of great strength... 

Ziegler found that adding certain metals or their compounds to the reaction mixture led to the formation of ethylene oligomers with 6-18 carbons but others promoted the for matron of very long carbon chains giving polyethylene Both were major discoveries The 6-18 carbon ethylene oligomers constitute a class of industrial organic chemicals known as linear a olefins that are produced at a rate of 3 X 10 pounds/year m the... 

In the early days following the discovery of chirality it was thought that only molecules of the type CWXYZ, multiply substituted methanes, were important in this respect and it was said that a molecule with an asymmetric carbon atom forms enantiomers. Nowadays, this definition is totally inadequate, for two reasons. The first is that the existence of enantiomers is not confined to molecules with a central carbon atom (it is not even confined to organic molecules), and the second is that, knowing what we do about the various possible elements of symmetry, the phrase asymmetric carbon atom has no real meaning. 

Acetylene-Based Routes. Walter Reppe, the father of modem acetylene chemistry, discovered the reaction of nickel carbonyl with acetylene and water or alcohols to give acryUc acid or esters (75,76). This discovery led to several processes which have been in commercial use. The original Reppe reaction requires a stoichiometric ratio of nickel carbonyl to acetylene. The Rohm and Haas modified or semicatalytic process provides 60—80% of the carbon monoxide from a separate carbon monoxide feed and the remainder from nickel carbonyl (77—78). The reactions for the synthesis of ethyl acrylate are... 

Acrylonitrile (AN), C H N, first became an important polymeric building block in the 1940s. Although it had been discovered in 1893 (1), its unique properties were not realized until the development of nitrile mbbers during World War II (see Elastomers, synthetic, nitrile rubber) and the discovery of solvents for the homopolymer with resultant fiber appHcations (see Fibers, acrylic) for textiles and carbon fibers. As a comonomer, acrylonitrile (qv) contributes hardness, rigidity, solvent and light resistance, gas impermeabiUty, and the abiUty to orient. These properties have led to many copolymer apphcation developments since 1950. 

Vulcanization was first reported in 1839 with the discovery that heating natural mbber with sulfur and basic lead carbonate produced an improvement in physical properties (2). In 1906, aniline was the first organic compound found to have the abiUty to accelerate the reaction of sulfur with natural mbber (3). Various derivatives of aniline were soon developed which were less toxic and possessed increased acceleration activity. 

Tetracarbaboranes, which contain four carbon atoms in a single polyhedral skeleton, were rare until the discovery (129) of the metaHacarborane-mediated synthesis of (CH3)4C4BgHg [58815-26-2]. 

Interest in the synthesis of diamond [7782-40-3] was first stimulated by Lavoisier s discovery that diamond was simply carbon it was also observed that diamond, when heated at 1500—2000°C, converted into graphite [7782-42-5]. In 1880, the British scientist Haimay reported (1) that he made diamond from hydrocarbons, bone oil, and lithium, but no one has been able to repeat this feat (2). About the same time, Moissan beheved (3) that he made diamond from hot molten mixtures of iron and carbon, but his experiments could not be repeated (4,5). 

Around 1800, the attack of chromite [53293-42-8] ore by lime and alkaU carbonate oxidation was developed as an economic process for the production of chromate compounds, which were primarily used for the manufacture of pigments (qv). Other commercially developed uses were the development of mordant dyeing using chromates in 1820, chrome tanning in 1828 (2), and chromium plating in 1926 (3) (see Dyes and dye intermediates Electroplating Leather). In 1824, the first chromyl compounds were synthesized followed by the discovery of chromous compounds 20 years later. Organochromium compounds were produced in 1919, and chromium carbonyl was made in 1927 (1,2). 

In the late 1980s, however, the discovery of a noble metal catalyst that could tolerate and destroy halogenated hydrocarbons such as methyl bromide in a fixed-bed system was reported (52,53). The products of the reaction were water, carbon dioxide, hydrogen bromide, and bromine. Generally, a scmbber would be needed to prevent downstream equipment corrosion. However, if the focus of the control is the VOCs and the CO rather than the methyl bromide, a modified catalyst formulation can be used that is able to tolerate the methyl bromide, but not destroy it. In this case the methyl bromide passes through the bed unaffected, and designing the system to avoid downstream effects is not necessary. Destmction efficiencies of hydrocarbons and CO of better than 95% have been reported, and methyl bromide destmctions between 0 and 85% (52). 

Fischer-Tropsch Synthesis The best-known technology for producing hydrocarbons from synthesis gas is the Fischer-Tropsch synthesis. This technology was first demonstrated in Germany in 1902 by Sabatier and Senderens when they hydrogenated carbon monoxide (CO) to methane, using a nickel catalyst. In 1926 Fischer and Tropsch were awarded a patent for the discovery of a catalytic technique to convert synthesis gas to liquid hydrocarbons similar to petroleum. 

The high thermal stability of the carbon-fluorine bond has led to considerable interest in fluorine-containing polymers as heat-resistant plastics and rubbers. The first patents, taken out by IG Farben in 1934, related to polychlorotri-fluoroethylene (PCTFE) (Figure 13.1 (a)), these materials being subsequently manufactured in Germany and the United States. PCTFE has been of limited application and it was the discovery of polytetrafluoroethylene (PTFE) (Figure... 

Carothers also produced a number of aliphatic linear polyesters but these did not fulfil his requirements for a fibre-forming polymer which were eventually met by the polyamide, nylon 66. As a consequence the polyesters were discarded by Carothers. However, in 1941 Whinfield and Dickson working at the Calico Printers Association in England announced the discovery of a fibre from poly(ethylene terephthalate). Prompted by the success of such a polymer, Farbenfabriken Bayer initiated a programme in search of other useful polymers containing aromatic rings in the main chain. Carbonic acid derivatives were reacted with many dihydroxy compounds and one of these, bis-phenol A, produced a polymer of immediate promise. 

Regarding a historical perspective on carbon nanotubes, very small diameter (less than 10 nm) carbon filaments were observed in the 1970 s through synthesis of vapor grown carbon fibers prepared by the decomposition of benzene at 1100°C in the presence of Fe catalyst particles of 10 nm diameter [11, 12]. However, no detailed systematic studies of such very thin filaments were reported in these early years, and it was not until lijima s observation of carbon nanotubes by high resolution transmission electron microscopy (HRTEM) that the carbon nanotube field was seriously launched. A direct stimulus to the systematic study of carbon filaments of very small diameters came from the discovery of fullerenes by Kroto, Smalley, and coworkers [1], The realization that the terminations of the carbon nanotubes were fullerene-like caps or hemispheres explained why the smallest diameter carbon nanotube observed would be the same as the diameter of the Ceo molecule, though theoretical predictions suggest that nanotubes arc more stable than fullerenes of the same radius [13]. The lijima observation heralded the entry of many scientists into the field of carbon nanotubes, stimulated especially by the un-... 

In the years following the Brooks and Taylor discovery, many researchers attempted to produce a mesophase pitch suitable for carbon fiber production. Otani et al. [21] were first to report producing a high-modulus carbon fiber from a "specific pitch-like material." The precursor used was tetrabenzophenazine, and thus, the resulting material might be considered a synthetic pitch. 

In the theoretical carbon nanotube literature, the focus is on single-wall tubules, cylindrical in shape with caps at each end, such that the two caps can be joined together to form a fullerene. The cylindrical portions of the tubules consist of a single graphene sheet that is shaped to form the cylinder. With the recent discovery of methods to prepare single-w alled nanotubes[4,5), it is now possible to test the predictions of the theoretical calculations. 

---