Carbene precursors, reaction with

Ifcobs is directly proportional to pyridine concentration. Therefore a plot of kobs vs. [pyridine] is linear, with a slope (k ) equal to the second order rate constant for ylide formation, and an intercept (k0) equal to the sum of all processes that destroy the carbene in the absence of pyridine (e.g.) intramolecular reactions, carbene dimerization, reactions with solvent, and, in the case of diazirine or diazo carbene precursors, azine formation. 

In the photolysis of difiuorodiazirine (218) a singlet carbene was also observed (65JA758). Reactions of the difiuorocarbene were especially studied with partners which are too reactive to be used in the presence of conventional carbene precursors, such as molecular chlorine and iodine, dinitrogen tetroxide, nitryl chloride, carboxylic acids and sulfonic acids. Thus chlorine, trifiuoroacetic acid and trifiuoromethanesulfonic acid reacted with difiuorodiazirine under the conditions of its photolysis to form compounds (237)-(239) (64JHC233). 

Tnmethyl(trifluororaethyl)tin can also be prepared via in situ formation and capture of tnfluorometbide by trimethyltin chlonde [13, 14] (equation 9) This tin analogue has been used as a precursor for difluorocarbene either by thermal decomposition or by reaction with sodium iodide m 1,2-dimethoxyethane This carbene generation procedure has been used to study difluorocarbene selectivity with steroidal olefins [75] (equation 10). 

Organometallic complexes of copper, silver, and gold are ideal precursors for carbene complexes along with some C- and N-coordinated species. Their reactivity pattern, in particular in oxidative addition reactions, was the most comprehensively studied. 

Correlated or geminate radical pairs are produced in unimolecular decomposition processes (e.g. peroxide decomposition) or bimolecular reactions of reactive precursors (e.g., carbene abstraction reactions). Radical pairs formed by the random encounter of freely diffusing radicals are referred to as uncorrelated or encounter (P) pairs. Once formed, the radical pairs can either collapse, to give combination or disproportionation products, or diffuse apart into free radicals (doublet states). The free radicals escaping may then either form new radical pairs with other radicals or react with some diamagnetic scavenger... 

Carbenes and substituted carbenes add to double bonds to give cyclopropane derivatives ([1 -f 2]-cycloaddition). Many derivatives of carbene (e.g., PhCH, ROCH) ° and Me2C=C, and C(CN)2, have been added to double bonds, but the reaction is most often performed with CH2 itself, with halo and dihalocarbenes, " and with carbalkoxycarbenes (generated from diazoacetic esters). Alkylcarbenes (HCR) have been added to alkenes, but more often these rearrange to give alkenes (p. 252). The carbene can be generated in any of the ways normally used (p. 249). However, most reactions in which a cyclopropane is formed by treatment of an alkene with a carbene precursor do not actually involve free carbene... 

Cyclopenta[fc]dioxanes (44) are accessible from the reaction of the dioxenylmolybdenum carbene complex (43) with enynes <96JOC159>, whilst an intramolecular and stereoselective cyclisation of (Ti5-dienyl)tricarbonyliron(l+) cations affords chiral frans-2,3-disubstituted 1,4-dioxanes <96JOC1914>. 2,3-Dimethylidene-2,3-dihydro-1,4-benzodioxin is a precursor of the 3,8-dioxa-lff-cyclopropa[i]anthracene, which readily dimerises to dihydrotetraoxaheptacene (45) and the analogous heptaphene <96AJC533>. 

Dihalocarbene complexes are useful precursors to new carbenes by nucleophilic displacement of the chlorine substituents. This has been nicely illustrated for Fe(TPP)(=CCl2) by its reaction with two equivalents of Re(CO)5J to give the unusual /t-carbido complex Fe(TPP)=C=Re(CO)4Re(CO)5 which also contains a rhenium-rhenium bond. " The carbido carbon resonance was observed at 211.7 ppm in the C NMR spectrum. An X-ray crystal structure showed a very short Fe=C bond (1.605(13) A, shorter than comparable carbyne complexes) and a relatively long Re=C bond (1.957( 12) A) (Fig. 4, Table III). " ... 

Diazoalkanes are u.seful is precursors to ruthenium and osmium alkylidene porphyrin complexes, and have also been investigated in iron porphyrin chemistry. In an attempt to prepare iron porphyrin carbene complexes containing an oxygen atom on the /(-carbon atom of the carbene, the reaction of the diazoketone PhC(0)C(Ni)CH3 with Fe(TpCIPP) was undertaken. A low spin, diamagnetic carbene complex formulated as Fe(TpCIPP)(=C(CH3)C(0)Ph) was identified by U V-visible and fI NMR spectroscopy and elemental analysis. Addition of CF3CO2H to this rapidly produced the protonated N-alkyl porphyrin, and Bit oxidation in the presence of sodium dithionitc gave the iron(II) N-alkyl porphyrin, both reactions evidence for Fe-to-N migration processes. ... 

Further studies were carried out with halocarbene amides 34 and 357 Although again no direct spectroscopic signatures for specifically solvated carbenes were found, compelling evidence for such solvation was obtained with a combination of laser flash photolysis (LFP) with UV-VIS detection via pyridine ylides, TRIR spectroscopy, density functional theory (DFT) calculations, and kinetic simulations. Carbenes 34 and 35 were generated by photolysis of indan-based precursors (Scheme 4.7) and were directly observed by TRIR spectroscopy in Freon-113 at 1635 and 1650 cm , respectively. The addition of small amounts of dioxane or THF significantly retarded the rate of biomolecular reaction with both pyridine and TME in Freon-113. Also, the addition of dioxane increased the observed lifetime of carbene 34 in Freon-113. These are both unprecedented observations. 

A second route was devised using chiral /3-keto ester 14, which was identified as our precursor for 2 [7]. This idea was in analogy with the carbapenem chemistry [8], as depicted in Scheme 2.4, where Masamune reaction [9] for carbon elongation, diazo-transfer, and transition metal-mediated carbene insertion reaction [10] were employed as key steps sequentially. 

Photolysis of acyldisilanes at A > 360 nm (103,104) was shown, based on trapping experiments, to yield both silenes 22 and the isomeric siloxy-carbenes 23, but with polysilylacylsilanes only silenes 24 are formed, as shown by trapping experiments and NMR spectroscopy (104,122-124) (see Scheme 4). These silenes react conventionally with alcohols, 2,3-dimethylbutadiene (with one or two giving some evidence of minor amounts of ene-like products), and in a [2 + 2] manner with phenyl-propyne. Ketones, however, do not react cleanly. Perhaps the most unusual behavior of this family of silenes is their exclusive head-to-head dimerization as described in Section V. More recently it has been found that these silenes undergo thermal [2 + 2] reactions with butadiene itself (with minor amounts of the [2 + 4] adduct) and with styrene and vinyl-naphthalene. Also, it has been found that a dimethylsilylene precursor will... 

The fact that Schrock s proposed metallocyclobutanes decomposed to propylene derivatives rather than cyclopropanes was fortunate in that further information resulted regarding the stereochemistry of the olefin reaction with the carbene carbon, as now the /3-carbon from the metal-locycle precursor retained its identity. The reaction course was consistent with nucleophilic attack of the carbene carbon on the complexed olefin, despite potential steric hindrance from the bulky carbene. Decomposition via pathways f-h in Eq. (26) was clearly confirmed in studies utilizing deuterated olefins (67). 

In order to safely identify k0 with intramolecular carbenic reactions (e.g., k and the formation of alkene 4 in Scheme 1), product analysis should demonstrate that the yield of intramolecular products exceeds 90%, while dimer, azine, and solvent-derived (intermolecular) carbene products should be absent or minimal. If these conditions are not met, mechanistic interpretation is often ambiguous, a result that is well illustrated by the saga of benzylchlorocarbene (see below, Section IV.C). Less desirably, k0 can be corrected for competitive intermolecular carbenic reactions. Bimolecular reactions like dimerization and azine formation can be minimized by working at low carbene precursor concentrations, and careful experimental practice should include quantitative product studies at several precursor concentrations to highlight potential product contamination by intermolecular processes. 

Knowledge of the intramolecular product distribution may allow for the partitioning of k between competitive intramolecular reactions, but one must be certain that noncarbenic routes to the products do not compete with the carbenic pathways. In particular, we must be concerned with the possible intervention of RIES (cf. Section m.C), especially when diazirines or diazoalkanes are the carbene precursors. Again, corrections for RIES can be made to quantitate the carbenic routes see, for example, the discussion of the cyclobutylhalocarbene rearrangements (Section m.C.1). 

Additional evidence for a second intermediate in supposed carbene reactions comes from numerous studies.17-29 In the earliest experimental approach, the carbene precursor, frequently a diazirine, was photolyzed in the presence of increasing quantities of an alkene, which trapped the carbene with the formation of a cyclopropane (5 in Scheme 1). If carbene 2 were the sole product-forming intermediate, as depicted in Scheme 1, then the ratio of its alkene addition product (5) to its 1,2-H shift rearrangement product (4) would vary linearly with alkene concentration Eq. 9. 

An alternative to the synthesis of epoxides is the reaction of sulfur ylide with aldehydes and ketones.107 This is a carbon-carbon bond formation reaction and may offer a method complementary to the oxidative processes described thus far. The formation of sulfur ylide involves a chiral sulfide and a carbene or carbenoid, and the general reaction procedure for epoxidation of aldehydes may involve the application of a sulfide, an aldehyde, or a carbene precursor as well as a copper salt. This reaction may also be considered as a thiol acetal-mediated carbene addition to carbonyl groups in the aldehyde. 

Certain transition metal complexes catalyze the decomposition of diazo compounds. The metal-bonded carbene intermediates behave differently from the free species generated via photolysis or thermolysis of the corresponding carbene precursor. The first catalytic asymmetric cyclopropanation reaction was reported in 1966 when Nozaki et al.93 showed that the cyclopropane compound trans- 182 was obtained as the major product from the cyclopropanation of styrene with diazoacetate with an ee value of 6% (Scheme 5-56). This reaction was effected by a copper(II) complex 181 that bears a salicyladimine ligand. 

The drawback of the CVD method is eliminated in ROMP, which is based on a catalytic (e.g., molybdenum carbene catalyst) reaction, occurring in rather mild conditions (Scheme 2.3). A living ROMP reaction ofp-cyclophanc 3 or bicyclooctadiene 5 results in soluble precursors of PPV, polymers 4 [31] and 6 [32], respectively, with rather low polydispersity. In spite of all cis (for 4) and cis and trans (for 6) configuration, these polymers can be converted into aW-trans PPV by moderate heating under acid-base catalysis. However, the film-forming properties of ROMP precursors are usually rather poor, resulting in poor uniformity of the PPV films. 

The initial question was whether the active catalyst is copper metal, copper(I), or copper(II), because all metal precursors gave results. Without the proper control of the valence state and the ligand environment the selectivities for the copper catalysed cyclopropanations (or carbene insertion reactions) have remained low or inconsistent for a long period of time. It was only in the sixties that a more systematic study of these issues was started. Several divalent copper salts were successfully used, but Kochi and Salomon [1] showed with the use of Cu(I)OTf that most likely copper(I) was the actual species needed for this reaction. 

The transition metal-catalyzed cyclopropanation of alkenes is one of the most efficient methods for the preparation of cyclopropanes. In 1959 Dull and Abend reported [617] their finding that treatment of ketene diethylacetal with diazomethane in the presence of catalytic amounts of copper(I) bromide leads to the formation of cyclopropanone diethylacetal. The same year Wittig described the cyclopropanation of cyclohexene with diazomethane and zinc(II) iodide [494]. Since then many variations and improvements of this reaction have been reported. Today a large number of transition metal complexes are known which react with diazoalkanes or other carbene precursors to yield intermediates capable of cyclopropanating olefins (Figure 3.32). However, from the commonly used catalysts of this type (rhodium(II) or palladium(II) carboxylates, copper salts) no carbene complexes have yet been identified spectroscopically. 

The most common byproducts encountered in cyclopropanations with diazoalkanes as carbene precursors are azines and carbene dimers , i.e. symmetric olefins resulting from the reaction of the intermediate carbene complex with the diazoalkane. The formation of these byproducts can be supressed by keeping the concentration of diazoalkane in the reaction mixture as low as possible. For this purpose, the automated, slow addition of the diazoalkane to a mixture of catalyst and substrate (e.g. by means of a pump or a syringe motor) has proven to be a very valuable technique. 

Ylide formation, and hence X-H bond insertion, generally proceeds faster than C-H bond insertion or cyclopropanation [1176], 1,2-C-H insertion can, however, compete efficiently with X-H bond insertion [1177]. One problem occasionally encountered in transition metal-catalyzed X-H bond insertion is the deactivation of the (electrophilic) catalyst L M by the substrate RXH. The formation of the intermediate carbene complex requires nucleophilic addition of a carbene precursor (e.g. a diazocarbonyl compound) to the complex Lj,M. Other nucleophiles present in the reaction mixture can compete efficiently with the carbene precursor, or even lead to stable, catalytically inactive adducts L M-XR. For this reason carbene X-H bond insertion with substrates which might form a stable complex with the catalyst (e.g. amines, imidazole derivatives, thiols) often require larger amounts of catalyst and high reaction temperatures. 

The normal byproducts formed during the transition metal-catalyzed decomposition of diazoalkanes are carbene dimers and azines [496,1023,1329], These products result from the reaction of carbene complexes with the carbene precursor. Their formation can be suppressed by slow addition (e.g. with a syringe motor) of a dilute solution of the diazo compound to the mixture of substrate and catalyst. Carbene dimerization can, however, also be a synthetically useful process. If, e.g., diazoacetone is treated with 0.1% RuClCpIPPhjij at 65 °C in toluene, cw-3-hexene-2,5-dione is obtained in 81% yield with high stereoselectivity [1038]. 

The reaction of thiourea derivatives with a metal complex to form NHC complexes is a combination of the NHC formation from thioureas with potassium or sodium [Eq. (23)] and the cleavage of electron rich olefins. For example, a lO-S-3-tetraazapentalene derivative is cleaved by Pd(PPh3)4 and [(Ph3P)3RhCl], respectively [Eq. (35)]. Other substitution patterns in the carbene precursor, including selenium instead of sulfur can also be used. ... 

---