Carbene complexes with electrophilic carbenes

In contrast to reactions with nucleophiles, only few reactions of Fischer-type carbene complexes with electrophiles are known. 

Vinylidene complexes may also be formed by the reaction of ii -alkynyl complexes with electrophiles (Scheme 8.49). Again, if an alcohol is present, a carbene complex will be formed. In this case, the carbene complex 8.184 was converted to a gem-dimethyl group by reaction with a Grignard reagent. 

Transition metal carbene complexes have broadly been classified into Fischer-type and Schrock-type carbene complexes. The former, typically low-valent, 18-electron complexes with strong 7t-acceptors at the metal, are electrophilic at the carbene carbon atom (C ). On the other hand, Schrock-type carbene complexes are usually high-valent complexes with fewer than 18 valence electrons, and without n-accepting ligands. Schrock-type carbene complexes generally behave as carbon nucleophiles (Figure 1.4). 

Calculations [28] on the formation of cyclopropanes from electrophilic Fischer-type carbene complexes and alkenes suggest that this reaction does not generally proceed via metallacyclobutane intermediates. The least-energy pathway for this process starts with electrophilic addition of the carbene carbon atom to the alkene (Figure 1.9). Ring closure occurs by electrophilic attack of the second carbon atom... 

Fig. 1.9. Possible mechanism of the cyclopropanation of alkenes with electrophilic carbene complexes [28].

Fig. 2.20. Reaction of heteroatom-substituted carbene complexes with nucleophilic and electrophilic tin derivatives.

Several reaction sequences have been reported in which Fischer-type carbene complexes are converted in situ into non-heteroatom-substituted carbene complexes, which then cyclopropanate simple olefins [306,307] (Figure 2.22). This can, for instance, be achieved by treating the carbene complexes with dihydropyridines, forming (isolable) pyridinium ylides. These decompose thermally to yield pyridine and highly electrophilic, non-heteroatom-substituted carbene complexes (Figure 2.22) [46]. 

Fig. 2.23. Cyclization of enynes with electrophilic and nucleophilic carbene complexes.

Closely related to the ring-closing metathesis of enynes (Section 3.2.5.6), catalyzed by non-heteroatom-substituted carbene complexes, is the reaction of stoichiometric amounts of Fischer-type carbene complexes with enynes [266,308 -315] (for catalytic reactions, see [316]). In this reaction [2 + 2] cycloaddition of the carbene complex and the alkyne followed by [2 -t- 2] cycloreversion leads to the intermediate formation of a non-heteroatom-substituted, electrophilic carbene complex. This intermediate, unlike the corresponding nucleophilic carbene... 

Non-heteroatom-substituted carbene complexes can also be generated by treatment of electrophilic transition metal complexes with ylides (e.g. diazoalkanes, phosphorus ylides, nucleophilic carbene complexes, etc. Section 3.1.3). Alkyl complexes with a leaving group in the a-position are formed as intermediates. These alkyl complexes can undergo spontaneous release of the leaving group to yield a carbene complex (Figure 3.2). 

Electrophilic transition metal complexes can react with organic ylides to yield alkylidene complexes. A possible mechanism would be the initial formation of alkyl complexes, which are converted into the final carbene complexes by electrophilic a-abstraction (Figure 3.18). This process is particularly important for the generation of acceptor-substituted carbene complexes (Section 4.1). 

Some carbyne complexes, in particular cationic ones with good Ji-accepting ligands, can react with nucleophiles to give carbene complexes [187,521]. Several reductions of carbyne complexes to carbene complexes by treatment with metal hydrides have been reported. Similarly, organolithium or other carbanionic reagents can react with electrophilic carbyne complexes to yield carbene complexes. Illustrative examples of both reactions are sketched in Figure 3.23. 

Closely related to the a-addition of nucleophiles is the P-deprotonation of electrophilic carbyne complexes. In many of the examples reported [143,530,531] the resulting vinylidene complexes could not be isolated but were generated in situ and either oxidized to yield stable carbene complexes [532] or used as intermediates for the preparation of other carbyne complexes [527]. Cationic carbyne complexes can be rather strong acids and undergo quick deprotonation to vinylidene complexes with weak bases [143]. An interesting example of the use of anionic vinylidene complexes as synthetic intermediates is sketched in Figure 3.24. 

Electron-rich carbyne complexes can react at the carbyne carbon atom with electrophiles to yield carbene complexes. Numerous examples of such reactions, mostly protonations, have been reported [519]. Depending on the nucleophilicity of the carbyne complex, such reactions will occur more or less readily. The protonation of weakly nucleophilic carbyne complexes requires the use of strong acids, such as triflic [533], tetrafluoroboric [534] or hydrochloric acid [535,536]. More electron-rich carbyne complexes can, however, even react with phenols [537,538], water [393,539], amines [418,540,541], alkyl halides, or intramolecularly with arenes (cyclometallation, [542]) to yield the corresponding carbene complexes. A selection of illustrative examples is shown in Figure 3.25. 

Protonation of alkenyl complexes has been used [56,534,544,545] for generating cationic, electrophilic carbene complexes similar to those obtained by a-abstraction of alkoxide or other leaving groups from alkyl complexes (Section 3.1.2). Some representative examples are sketched in Figure 3.27. Similarly, electron-rich alkynyl complexes can react with electrophiles at the P-position to yield vinylidene complexes [144,546-551]. This approach is one of the most appropriate for the preparation of vinylidene complexes [128]. Figure 3.27 shows illustrative examples of such reactions. 

Low-valent, 18-electron (Fischer-type) carbene complexes with strong n-acceptors usually are electrophilic at the carbene carbon atom (C ). These complexes can undergo reactions similar to those of free carbenes, e.g. cyclopropanation or C-H insertion reactions. The carbene-like character of these complexes becomes more pronounced when electron-accepting groups are directly bound to C (Chapter 4), whereas electron-donating groups strongly attenuate the reactivity (Chapter 2). 

In cyclopropanations with electrophilic carbene complexes, yields of cyclopropanes tend to improve with increasing electron density of the alkene. As illustrated by the examples in Table 3.5, cyclopropanations of enol ethers with aryldiazomethanes often proceed in high yields. Simple alkyl-substituted olefins are, however, more difficult to cyclopropanate with diazoalkanes. A few examples of the cyclopropanation of enamines with diazoalkanes have been reported [650]. 

Most electrophilic carbene complexes with hydrogen at Cjj will undergo fast 1,2-proton migration with subsequent elimination of the metal and formation of an alkene. For this reason, transition metal-catalyzed cyclopropanations with non-acceptor-substituted diazoalkanes have mainly been limited to the use of diazomethane, aryl-, and diaryldiazomethanes (Tables 3.4 and 3.5). 

The most important synthetic access to acceptor-substituted carbene complexes is the reaction of ylides with electrophilic, coordinatively unsaturated transition metal complexes (Figure 4.1 see also Section 3.1.3). 

The most frequently used ylides for carbene-complex generation are acceptor-substituted diazomethanes. As already mentioned in Section 3.1.3.1, non-acceptor-substituted diazoalkanes are strong C-nucleophiles, easy to convert into carbene complexes with a broad variety of transition metal complexes. Acceptor-substituted diazomethanes are, however, less nucleophilic (and more stable) than non-acceptor-substituted diazoalkanes, and require catalysts of higher electrophilicity to be efficiently decomposed. Not surprisingly, the very stable bis-acceptor-substituted diazomethanes can be converted into carbene complexes only with strongly electrophilic catalysts. This order of reactivity towards electrophilic transition metal complexes correlates with the reactivity of diazoalkanes towards other electrophiles, such as Brpnsted acids or acyl halides. 

Ylides other than acceptor-substituted diazomethanes have only occasionally been used as carbene-complex precursors. lodonium ylides (PhI=CZ Z ) [1017,1050-1056], sulfonium ylides [673], sulfoxonium ylides [1057] and thiophenium ylides [1058,1059] react with electrophilic transition metal complexes to yield intermediates capable of undergoing C-H or N-H insertions and olefin cyclopropanations. 

The formation of six-membered or larger rings by intramolecular C-H bond insertion normally requires the attacked position to be especially activated towards electrophilic attack [1157,1158]. Electron-rich arenes or heteroarenes [1159-1162] and donor-substituted methylene groups can react intramolecularly with electrophilic carbene complexes to yield six- or seven-membered rings. Representative examples are given in Table 4.8. 

Ylide formation, and hence X-H bond insertion, generally proceeds faster than C-H bond insertion or cyclopropanation [1176], 1,2-C-H insertion can, however, compete efficiently with X-H bond insertion [1177]. One problem occasionally encountered in transition metal-catalyzed X-H bond insertion is the deactivation of the (electrophilic) catalyst L M by the substrate RXH. The formation of the intermediate carbene complex requires nucleophilic addition of a carbene precursor (e.g. a diazocarbonyl compound) to the complex Lj,M. Other nucleophiles present in the reaction mixture can compete efficiently with the carbene precursor, or even lead to stable, catalytically inactive adducts L M-XR. For this reason carbene X-H bond insertion with substrates which might form a stable complex with the catalyst (e.g. amines, imidazole derivatives, thiols) often require larger amounts of catalyst and high reaction temperatures. 

The reaction of acceptor-substituted carbene complexes with alcohols to yield ethers is a valuable alternative to other etherification reactions [1152,1209-1211], This reaction generally proceeds faster than cyclopropanation [1176], As in other transformations with electrophilic carbene complexes, the reaction conditions are mild and well-suited to base- or acid-sensitive substrates [1212], As an illustrative example, Experimental Procedure 4.2.4 describes the carbene-mediated etherification of a serine derivative. This type of substrate is very difficult to etherify under basic conditions (e.g. NaH, alkyl halide [1213]), because of an intramolecular hydrogen-bond between the nitrogen-bound hydrogen and the hydroxy group. Further, upon treatment with bases serine ethers readily eliminate alkoxide to give acrylates. With the aid of electrophilic carbene complexes, however, acceptable yields of 0-alkylated serine derivatives can be obtained. 

Acceptor-substituted carbene complexes are electrophilic intermediates which react readily with lone pairs, giving the corresponding ylides. These can be valuable intermediates, capable of undergoing a broad range of synthetically useful transformations. This subject has been treated in several reviews [38,995,1077-1079,1086]. 

Tertiary amines can react with electrophilic carbene complexes to yield ammonium ylides which usually undergo Stevens rearrangement (Figure 4.8) leading to products of a formal carbene C-N bond insertion. 

Table 4.15. Preparation of thioethers by S-alkylation of thiols with electrophilic carbene complexes.

If chiral catalysts are used to generate the intermediate oxonium ylides, non-racemic C-O bond insertion products can be obtained [1265,1266]. Reactions of electrophilic carbene complexes with ethers can also lead to the formation of radical-derived products [1135,1259], an observation consistent with a homolysis-recombination mechanism for 1,2-alkyl shifts. Carbene C-H insertion and hydride abstraction can efficiently compete with oxonium ylide formation. Unlike free car-benes [1267,1268] acceptor-substituted carbene complexes react intermolecularly with aliphatic ethers, mainly yielding products resulting from C-H insertion into the oxygen-bound methylene groups [1071,1093]. 

When planning reactions of thiocarbonyl compounds with electrophilic carbene complexes it should be taken into aceount that thiocarbonyl compounds can undergo uncatalyzed 1,3-dipolar cycloaddition with acceptor-substituted diazomethanes to yield 1,3,4-thiadiazoles. These can either be stable or eliminate nitrogen to yield thiiranes or other products similar to those resulting from thiocarbonyl ylides [1338]. 

Electrophilic carbene complexes can also react with organic halides to yield halonium ylides. Reaction of acceptor-substituted carbene complexes with allyl... 

One of the most efficient procedures for the synthesis of cyclopropanes is the reaction of alkenes with electrophilic carbene complexes. In this process up to three stereogenic centers can be generated in one step. Cyclopropanes are a key structural element encountered in many natural products with interesting biological activity. Further, by virtue of the ability of cyclopropanes to undergo ring-opening reactions these compounds can be valuable synthetic intermediates. 

Alkynes can be converted into cyclopropenes by inter- [587,1022,1052,1060-1062] or intramolecular [1070] cyclopropanation with electrophilic carbene complexes, Because of the high reactivity of cyclopropenes, however, in some of these reactions unexpected products can result from rearrangement or other transformations of the cyclopropenes initially formed (cf. Section 4,1,3),... 

---