Capability demonstration

Arzhaev A T, Kiselyov V.A., Bougaenko S E., Strelkov B.P, Badalyan VG, Vopilkin, A.Kb. Safety significance of Augur-4.2 on-site applications at RBMK NPPs. In NDE Techniques Capability Demonstration and Inspection Qualification, U. EstorffandP. Lematre (Eds ), 1997, pp, 251-259. 

Renewable energy processes include the operation of combustion and H2-handling systems and therefore have to be protected against fires (see Section 3.8) and explosions. Because chemicals display different explosive characteristics and processes differ in physical dimensions, an explosion suppression system is usually a design package. In many instances, approval for insurance must be obtained from fire underwriters with evidence of design capability demonstrated in a test. 

JC. mydas is using chemoreception and not taste in this discrimination since zinc sulfate ablation of the chemo-sensory epithelia removed the capability demonstrated above. 

Although the present Good Workmanship approach actually gives conventional NDT methods the credit they deserve (their capabilities are well-used), there should nevertheless be a certainty beyond reasonable doubt that an accepted weld is fit for service. Many years of industrial experience have demonstrated that this certainty statistically exists. We are not doing things totally wrong. 

After the performance demonstration a number of damaged rotor blades were scanned followed by a number of destructive verifications of the results achieved by ultrasonic scanning. Based on this examination it was concluded that the wind turbine rotor blade scanner is capable of detecting defects such as delaminations, inclusions, missing adhesion, lack of adhesive, porosities and variations in thickness. 

In the following pages an account is given of some of the more simple reactions which enzymes catalyse. The reactions have been selected partly because they are of particular interest to the organic chemist, and partly because they are capable of simple and ready demonstration in the laboratory. 

In summary, we have demonstrated that it is possible to extend the scope of Lewis-acid catalysis of Diels-Alder reactions in water, by employing a chelating auxiliary. We envisage that analogues of 4.39 capable of undergoing a Mamrich reaction with 4.50 can be treated with reactive dienes in the presence of a Lewis-acid catalyst in water. 

The unexpected preference for the interfacial region at lower concentrations of benzene has prompted speculation. It has been demonstrated that aromatic compounds are capable of forming weak hydrogen bonds with water. This ability favours uptake in the aqueous interface over solubilisation in the interior. Alternatively, some authors have attributed the binding behaviour of benzene to its... 

The aromatic shifts that are induced by 5.1c, 5.If and S.lg on the H-NMR spectrum of SDS, CTAB and Zn(DS)2 have been determined. Zn(DS)2 is used as a model system for Cu(DS)2, which is paramagnetic. The cjkcs and counterion binding for Cu(DS)2 and Zn(DS)2 are similar and it has been demonstrated in Chapter 2 that Zn(II) ions are also capable of coordinating to 5.1, albeit somewhat less efficiently than copper ions. Figure 5.7 shows the results of the shift measurements. For comparison purposes also the data for chalcone (5.4) have been added. This compound has almost no tendency to coordinate to transition-metal ions in aqueous solutions. From Figure 5.7 a number of conclusions can be drawn. (1) The shifts induced by 5.1c on the NMR signals of SDS and CTAB... 

Before a procedure can provide useful analytical information, it is necessary to demonstrate that it is capable of providing acceptable results. Validation is an evaluation of whether the precision and accuracy obtained by following the procedure are appropriate for the problem. In addition, validation ensures that the written procedure has sufficient detail so that different analysts or laboratories following the same procedure obtain comparable results. Ideally, validation uses a standard sample whose composition closely matches the samples for which the procedure was developed. The comparison of replicate analyses can be used to evaluate the procedure s precision and accuracy. Intralaboratory and interlaboratory differences in the procedure also can be evaluated. In the absence of appropriate standards, accuracy can be evaluated by comparing results obtained with a new method to those obtained using a method of known accuracy. Chapter 14 provides a more detailed discussion of validation techniques. 

A mixture of methyl paraben, ethyl paraben, propyl paraben, diethyl phthalate, and butyl paraben is separated by HPLC. This experiment emphasizes the development of a mobile-phase composition capable of separating the mixture. A photodiode array detector demonstrates the coelution of the two compounds. 

A triangular shaped wheel cover with the center cut out to provide hub access was then applied to a wheel. The cover was constructed from a heat shrinkable poly- 10 olefin ftlm. Tape was attached to the apex points of the triangle. The tape liner was removed and the three adhesive sites were fastened to the spokes. As an identical complementary cover was then applied to the opposite face of the wheel in a mirror image fashion. The 1 adhesive contact points were positioned to encapsulate the spoke on either side within the adhesive contact point. Heat was then used to shrink the covers and achieve a wrinkle-free condition. This example demonstrates that design can play a part in providing a stylish wheel cover that is capable of individualizing the bicycle to meet a wide variety of consumer tastes. 

---