Camera, cameras video

Generating tubes and downcomers entering and leaving the top drum should be inspected either visibly or via the use of an optical fiber camera or video device (fiberscope, e.g., Boroscope ) for signs of corrosion or deposition. 

Yarin and Weiss[357] also determined the number and size of secondary droplets, as well as the total ejected mass during splashing. Their experimental observations by means of a computer-aided charge-coupled-device camera and video printer showed that the dependence of the critical impact velocity, at which splashing initiates, on the physical properties (density, viscosity, and surface tension) and the frequency of the droplet train is universal, and the threshold velocity may be estimated by ... 

Having supplies readily available (cameras, notebooks, video equipment, copies of regulations)... 

Fig. 20.11. Gait analysis device. (A) The gait analysis device is shown. The mouse is place on the treadmill in the green box. The mouse would be facing left and the loop at right in the chamber bumps the mouse s tail if they lag on the treadmill. The white box in front contains the digital camera that videos the mouse using an angled mirror. (B) The automated data analysis is trained to recognize the mouse s paws in the video and gait parameters are calculated, as well as body axis, toe spread, and other data.

Ten liters of waterfto avoid overheating), 10 liters of light oil and 1 liter of gasoline are poured into a container. A large case of caps is laid on the metal frame. Two nickel—chrom wire ignition balls are placed at two comers of the containers. After all people are moved 100 m away from the site, it is ignited. The phenomena were observed and recorded by eyes camera, video camera and microphone. 

Tubing connects the chamber and a high-pressure view cell, which is thermostated to the same temperature as the chamber. In order to observe swelling behavior, some of the solid material is also placed into the view cell. It thus is in contact with the gas at the same pressure and temperature as the material in the suspended vial. The interior of the view cell may be observed through a video camera. The video images are scanned into a PC and analyzed for changes in size. 

Use a Polaroid-type camera or video camera to record conditions of collections and structure. Make sure images clearly record damage. Supplement with better quality photos when necessary. 

Pharmaceutical and healthcare companies should have a company policy that no cameras, videos, or recording devices can be used without prior written permission. This policy should apply... 

Fig. 2, Laboratory setup for combustion synthesis. 1-reaction chamber 2-sample 3-base 4-quartz window 5-tungsten coil 6-power supply 7-video camera 8-video cassette recorder 9-video monitor 10-computer with data acquisition board 11-thermocouple 12-vacuum pump ...

Practical Tip for documentation with 254-nm UV light 35-mm cameras or video equipment is used to produce the required images, which are in black-and-white because these give better contrast of the spot with the background. Tlie color of the fluorescence indicator cannot therefore be seen on these images, so that no conclusions can be drawn about the precoated layers used. 

Schematic of furnace camera system shows (1) wallbox, (2) furnace lens, (3) air-cooled CCTV housing, (4) light volume control, (5) compact CCD camera, (6) video monitor, and (7) high-efficiency compressed air filter. ("FireSight High-Temperature Remote Viewing Systems." Lenox Instrument Company brochure with photos and diagrams of system and components.)...

Camera and video acquisition software see Subheading 2.3, items 4 and 5). 

Frozen sedimem surface Digital camera Video camera... 

Highly technical products usually require demonstration by a salesperson as well as prepurchase and postpurchase service that often requires that repair parts be stocked. Technical products include such items as computers, high-priced stereo components, expensive cameras and video equipment, im-... 

The measurement values obtained from a geodetic survey have errors. Therefore, if it is possible to estimate the approximate value for the measurement value, then it will be possible to adopt the approximate value instead of the measurement value in the theory of simultaneous adjustment. The approximate values for the eight unknowns tio,vo,c,ai, - in Eq. (6) can be estimated by the equipment such as a camera, video monitor or A/D converter. Therefore, we assume the correction value for each of the unknowns, the difference between the most probable value and the approximate value, to be the measurement value. The least squares equation for the calibration in the 2-D field can be written as follows ... 

Yet even now one potential area of application can be recognized distinctively. This is for relatively low-power energy sources (no more than 20 W) in electronic equipments such as notebooks, cameras, video cameras, DVD players, some medical devices, and so on. In these areas, direct methanol fuel cells, taking up little space, should replace the disposable or rechargeable conventional batteries used at present. 

Polaroid and 35-mm cameras, video recorder, monitor, video printer... 

Some systems also bear a vehicle identification sensor in the form of a picture or a video image. In this case, the camera or video is placed off road in a specially built housing and placed in a position to capture the vehicle s registration number and other features. 

---