Calcium displacement

Liquid MD penetrates skin on contact. Prolonged skin exposure to its arsenic component will lead to systemic damage through bone calcium displacement and subsequent bone marrow destruction. In its traditional form, MD quickly disperses in open terrain but presents a more prolonged hazard in tightly closed buildings, where it concentrates in basements and substructures due to its vapor density.1... 

This experiment is similar to the preceding one. Calcium displaces hydrogen from water... 

Although simple methods are available for producing calcium nitrate, its use as a fertilizer is offset by its extreme hygroscopicity. As a fertilizer, calcium nitrate has special advantages for use on saline soils becaise the calcium displaces the sodium that is absorbed by clay in... 

Until World War 1 acetone was manufactured commercially by the dry distillation of calcium acetate from lime and pyroligneous acid (wood distillate) (9). During the war processes for acetic acid from acetylene and by fermentation supplanted the pyroligneous acid (10). In turn these methods were displaced by the process developed for the bacterial fermentation of carbohydrates (cornstarch and molasses) to acetone and alcohols (11). At one time Pubhcker Industries, Commercial Solvents, and National Distillers had combined biofermentation capacity of 22,700 metric tons of acetone per year. Biofermentation became noncompetitive around 1960 because of the economics of scale of the isopropyl alcohol dehydrogenation and cumene hydroperoxide processes. 

Less activated substrates such as uorohaloben2enes also undergo nucleophilic displacement and thereby permit entry to other useful compounds. Bromine is preferentially displaced in -bromofluoroben2ene [460-00-4] by hydroxyl ion under the following conditions calcium hydroxide, water, cuprous oxide catalyst, 250°C, 3.46 MPa (500 psi), to give -fluorophenol [371-41-5] in 79% yield (162,163). This product is a key precursor to sorbinil, an en2yme inhibitor (aldose reductase). 

Stabilization Mechanism. Zinc and cadmium salts react with defect sites on PVC to displace the labHe chloride atoms (32). This reaction ultimately leads to the formation of the respective chloride salts which can be very damaging to the polymer. The role of the calcium and/or barium carboxylate is to react with the newly formed zinc—chlorine or cadmium—chlorine bonds by exchanging ligands (33). In effect, this regenerates the active zinc or cadmium stabilizer and delays the formation of significant concentrations of strong Lewis acids. 

Sodium ions are displaced from the resin by calcium ions, for which the resin has a greater selectivity. 

Reiaforced plastics may also iaclude fillers (qv), which are iaexpeasive materials such as calcium carboaate used to displace resia and reduce cost curing agents (catalysts), promoters, inhibitors, and accelerators, which affect thermosetting resia cure colorants release agents (qv) to faciUtate removal from the mold and other additives which can impart a wide variety of properties to the finished part, such as fire resistance, electrical conductivity, static dissipation, and ultraviolet resistance. 

Liquid Eeeders. Liquid feeders employ positive-displacement metering pumps for adding aqueous solutions of sodium or calcium hypochlorite. The feed solutions are typically stored in polyethylene tanks of various capacities up to about 0.19 m (50 gal). 

The calcium form of EDTA instead of free EDTA is used in many food preparations to stabilize against such deleterious effects as rancidity, loss of ascorbic acid, loss of flavor, development of cloudiness, and discoloration. The causative metal ions are sequestered by displacing calcium from the chelate, and possible problems, such as depletion of body calcium from ingestion of any excess of the free chelant, had it been used, are avoided. 

In the treatment of poisoning by lead or other metal ions, higher concentrations of chelant can be safely obtained in humans by administering Na2CaEDTA rather than Na EDTA. The metal ion is bound by displacing small amounts of Ca " that the body can tolerate. Use of Na EDTA would result in calcium chelation and thus serious depletion of calcium in the body fluids (44). Removal of iron in Cooley s anemia is accompHshed by using chelants that are relatively specific for iron (45). 

A versatile method for the direct C-21 halogenation of a 20-ketopregnane was discovered by Ringold and Stork it consists of reaction with iodine-calcium oxide in tetrahydrofuran-methanol, and the resulting 21-iodo compound is displaced by acetate in the usual fashion ... 

Bepridil (59) blocks the slow calcium channel and serves as an antianginal agent and a vasodilator. In its synthesis, alcohol (derived from epichlorohydrin) is converted to the corresponding chloride with thionyl chloride and displaced with the sodium salt of ]i-benzylaniline to give bepridil (59) °... 

If the experimental conditions are such that the equilibrium is completely displaced from left to right the cation C+ is completely fixed on the cation exchanger. If the solution contains several cations (C+, D+, and E + ) the exchanger may show different affinities for them, thus making separations possible. A typical example is the displacement of sodium ions in a sulphonate resin by calcium ions ... 

An interesting application is the titration of calcium. In the direct titration of calcium ions, solochrome black gives a poor end point if magnesium is present, it is displaced from its EDTA complex by calcium and an improved end point results (compare Section 10.51). 

Two absorbents are required, one for water vapour, the other for carbon dioxide. The absorbents for water vapour which are generally employed are (a) anhydrous calcium chloride (14-20 mesh), (b) anhydrous calcium sulphate ( Drierite or Anhydrocel ), and (c) anhydrous magnesium perchlorate ( Anhydrone ). Both (b) and (c) are preferable to (a) (c) absorbs about 50 per cent of its weight of water, but is expensive. Anhydrous calcium chloride usually contains a little free lime, which will absorb carbon dioxide also it is essential to saturate the U-tube containing calcium chloride with dry carbon dioxide for several hours and then to displace the carbon dioxide by a current of pure dry air before use. 

---