Butadienes substituted, cycloadditions

Recently, the reaction of masked ortho-benzoquinone [92] with C60 was tested [93]. The [4+2] cycloaddition reaction of such electron-deficient dienes with fullerenes resulted in the formation of highly functionalized bicyclo [2.2.2] octenone-fused fullerenes. The reactants were generated in situ by the oxidation of the readily available 2-methoxy phenols with hypervalent iodine agents. For the several different masked ortho-benzoquinones that were tested, it was found that the yield of the cycloadducts depends on the nature of the starting materials and the reaction conditions. Other Diels-Alder reactions of such electron-deficient dienes with electron-poor fullerenes involved tropones [94], 1,3-butadienes substituted with electron-withdrawing groups [95], and 2-pyrone [96]. 

A select group of 1,4-diaza-1,3-butadienes have been demonstrated to participate as 4ir components of Diels-Alder reactions (Table 12). Perhaps the most successful system described to date is the LUMOdiene-controlled [4 + 2] cycloaddition reaction of diiminosuccinonitrile, a 1,4-diaza-1,3-butadiene substituted with C-2 and C-3 electron-withdrawing groups, with electron-rich dienophiles (equation 15). A common and competitive reaction of the a-diimines is [2 + 2] cycloaddition to afford azetidine cycloaddition products and many of the early reports of the [4 + 2] cycloaddition reactions are incorrect. 

Since diazaquinones are among the most powerful dienophiles, they undergo [4+2] cycloaddition (Diels-Alder) reactions with a great variety of dienes to give various heterocyclic systems accessible with difficulty by other methods. Diazaquinone reacts with butadiene and substituted butadienes, carbocyclic and heterocyclic dienes, 1-vinylcycloalkenes, polyaromatic compounds and vinylaromatic compounds to afford bicyclic and polycyclic bridgehead diaza systems, including diazasteroids (Scheme 56). 

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

A simple approach for the formation of 2-substituted 3,4-dihydro-2H-pyrans, which are useful precursors for natural products such as optically active carbohydrates, is the catalytic enantioselective cycloaddition reaction of a,/ -unsaturated carbonyl compounds with electron-rich alkenes. This is an inverse electron-demand cycloaddition reaction which is controlled by a dominant interaction between the LUMO of the 1-oxa-1,3-butadiene and the HOMO of the alkene (Scheme 4.2, right). This is usually a concerted non-synchronous reaction with retention of the configuration of the die-nophile and results in normally high regioselectivity, which in the presence of Lewis acids is improved and, furthermore, also increases the reaction rate. 

Electronically rich 1,3-butadienes such as Danishefsky s diene react with chromium alkenylcarbene complexes affording seven-membered rings in a formal [4S+3C] cycloaddition process [73a, 95a]. It is important to remark on the role played by the metal in this reaction as the analogous tungsten carbene complexes lead to [4S+2C] cycloadducts (see Sect. 2.9.1.1). Formation of the seven-membered ring is explained by an initial cyclopropanation of the most electron-rich double bond of the diene followed by a Cope rearrangement of the formed divinylcyclopropane (Scheme 65). Amino-substituted 1,3-butadienes also react with chromium alkenylcarbene complexes to produce the corre-... 

S+3C] Heterocyclisations have been successfully effected starting from 4-amino-l-azadiene derivatives. The cycloaddition of reactive 4-amino-1-aza-1,3-butadienes towards alkenylcarbene complexes goes to completion in THF at a temperature as low as -40 °C to produce substituted 4,5-dihydro-3H-azepines in 52-91% yield [115] (Scheme 66). Monitoring the reaction by NMR allowed various intermediates to be determined and the reaction course outlined in Scheme 66 to be established. This mechanism features the following points in the chemistry of Fischer carbene complexes (i) the reaction is initiated at -78 °C by nucleophilic 1,2-addition and (ii) the key step cyclisation is triggered by a [l,2]-W(CO)5 shift. 

Vinyl- and acetylenic tricarbonyl compounds are reactive dienophilic components in Diels-Alder reactions. Cycloadditions of these compounds with substituted butadienes were recently used to develop a new synthetic approach to indole derivatives [14] (Scheme 2.9) by a three-step procedure including (i) condensation with primary amines, (ii) dehydration and (iii) DDQ oxidation. 

Quinone-mono-ketals 46 and 47 are also low reactive dienophiles and are sensitive to Lewis-acid catalysts. The use of high pressure overcomes this limitation [17]. As shown in Equation 5.7, cycloadditions with a variety of substituted 1,3-butadienes 48 occur regioselectively and c This approach provides access to a variety of annulated benzenes and naphthalenes after aromatization of adducts 49. 

A study [19] of the cycloaddition between substituted (E)-l-phenyl-1,3-butadienes 55 and substituted 1,1-dicyanoethylenes 56 leading to cis- and trans-cyclohexenes 57 and 58 (Equation 5.8) has shown that diastereoselectivity is markedly dependent on pressure. 

More functionalized 5,6-dihydro-2H-pyran-derivatives 71 and 72 have been prepared [26] by cycloaddition of 1 -methoxy-3-trialkylsilyloxy-1,3-butadienes 69 with t-butylglyoxylate (70) (Scheme 5.6). Whereas thermal reactions did not occur in good yields because of the decomposition of the cycloadducts, application of pressure (10 kbar) allowed milder conditions to be used, which markedly improved the reaction yields. The use of high pressure also gives preferentially en Jo-adduct allowing a stereocontrolled synthesis of a variety of substituted 5,6-dihydro-2H-pyran-derivatives, which are difficult to prepare by other procedures. 

Exohedral functionalization of [60]-fullerene by [4+2] cycloadditions. Diels-Alder reactions of [60]-fullerene with electron-rich 2,3-dioxy-substituted-1,3-butadienes [81]... 

Substituted 1,2,3,4-tetrahydroquinolines (e.g., 61) are formed with high regio- and stereoselectivity in high yield by intermolecular [A+2] cycloadditions of cationic 2-aza-butadienes and various dienophiles <95CC2137,96SL34>. 

Diels-Alder cycloadditions are sensitive to steric effects of two major types in the diene. Bulky substituents on the termini of the diene hinder approach of the two components to each other and decrease the rate of reaction. This effect can be seen in the relative reactivity of 1-substituted butadienes toward maleic anhydride.19... 

Instead of alkynes, allenes can also be used as substrates in this type of approach. Finally, one can also apply carbon-nucleophiles such as butadienes in this domino process. Thus, Lu and Xie [145] have treated the alkyne 6/1-303 with an aryl halide 6/1-304 and an amine 6/1-305 to give the substituted pyrrolidinone 6/1-308 via the proposed intermediates 6/1-306 and 6/1-307. As a side product, 6/1-309 is found to have been formed by a cycloaddition of 6/1-303 (Scheme 6/1.81). 

Amino-substituted dienes are also important dienophiles in Diels-Alder reactions. Recently, chiral and achiral 2-amino-l,3-dienes have been prepared to study their reactivity (see also asymmetric Diels-Alder reaction Section 8.1.2). The reaction of 2,3-diamino-l,3-butadienes with nitrostyrene gives unusual [3+2]carbocyclization products, 2-aminocyclopentanones, which are not formed by the direct cycloaddition but derived from the Michael addition products (see section discussing the Michael addition Section 4.1.3).42... 

The scope and efficiency of [4+2] cycloaddition reactions used for the synthesis of pyridines continue to improve. Recently, the collection of dienes participating in aza-Diels Alder reactions has expanded to include 3-phosphinyl-l-aza-l,3-butadienes, 3-azatrienes, and l,3-bis(trimethylsiloxy)buta-l, 3-dienes (1,3-bis silyl enol ethers), which form phosphorylated, vinyl-substituted, and 2-(arylsulfonyl)-4-hydroxypyridines, respectively <06T1095 06T7661 06S2551>. In addition, efforts to improve the synthetic efficiency have been notable, as illustrated with the use of microwave technology. As shown below, a synthesis of highly functionalized pyridine 14 from 3-siloxy-l-aza-1,3-butadiene 15 (conveniently prepared from p-keto oxime 16) and electron-deficient acetylenes utilizes microwave irradiation to reduce reaction times and improve yields <06T5454>. 

Six-membered rings. Thioketones react as dienophiles with conjugated dienes81,87 92 in Diels Alder [4+2] cycloadditions to form 3,6-dihydro-2H-thiopyrans regio- and stereo-selectivitely. 4 and 6 reacting with differently substituted 1,3-butadienes, Scheme 12, have shown a superdienophile activity.87 89... 

Thiazyl halide monomers undergo a variety of reactions that can be classified under the general headings (a) reactions involving the 7i-system of the N = S triple bond, (b) nucleophilic substitution, (c) halide abstraction, and (d) halide addition. The cycloaddition of NSF with hexafluoro-1,3-butadiene provides an example of a type (a) reaction. 

By regiospecific [4+2] cycloadditions of functional alkenyltin derivatives with dienes such as 1,3-butadiene, 2,3-dimethyl-l,3-butadiene or 1-substituted 1,3-butadienes, polyfunctional cyclic vinyltin compounds 80 are obtained. 

The nickel-catalyzed [4 + 4]-cycloaddition of butadiene to form cyclooctadiene was first reported by Reed in 1954.90 Pioneering mechanistic and synthetic studies largely derived from the Wilke group advanced this process to an industrially important route to cyclodimers, trimers, and other molecules of interest.91-94,943 95,96 While successful with simple dienes, this process is not useful thus far with substitutionally complex dienes as needed in complex molecule synthesis. In 1986, Wender and Ihle reported the first intramolecular nickel-catalyzed [4 + 4]-reaction of... 

The well-known Diels-Alder reaction [95,104-106] is a standard method for forming substituted cyclohexenes through the thermally allowed 4s + 2s cycloaddition of alkenes and dienes. In particular, the reaction between ethene and 1,3-butadiene to yield cyclohexene is the prototype of a Diels-Alder reaction (Scheme 28.4). It is now well recognized that this reaction takes place via a synchronous and concerted mechanism through an aromatic boatlike TS [105]. 

Functionalized dienophiles have long been used in synthetic organic chemistry. For example a substituted benzoquinone (a dienophile) underwent cycloaddition with 1,3 butadiene and was the first step in the early synthesis of steroids. 

Saalfrank, Hoffmann and co-workers performed a number of reactions with tetra-alkoxyallenes such as 196 (Scheme 8.47) [1, 41, 105, 114—116] and demonstrated that this class of donor-substituted allenes can serve as a 1,3-dianion equivalent of malonic acid. Treatment of 196 with cyclopropyldicarboxylic acid dichloride 197 produces 2,4-dioxo-3,4-dihydro-2H-pyran 198 through release of two molecules of ethyl chloride [115]. Similarily, the reaction of this allene 196 with oxalyl chloride gives 3-chloromalonic acid anhydride derivative 199. This intermediate is a reactive dieno-phile which accepts 2,3-dimethyl-l,3-butadiene in a subsequent [4+2] cycloaddition to afford cycloadduct 200 in good yield [116]. 

An extensive review of the hetero-Diels-Alder reactions of 1-oxabuta-1,3-dienes has been published. Ab initio calculations of the Diels-Alder reactions of prop-2-enethial with a number of dienophiles show that the transition states of all the reactions are similar and synchronous.Thio- and seleno-carbonyl compounds behave as superdienophiles in Diels-Alder reactions with cyclic and aryl-, methyl-, or methoxy-substituted open-chain buta-1,3-dienes.The intramolecular hetero-Diels-Alder reactions of 4-benzylidine-3-oxo[l,3]oxathiolan-5-ones (100) produce cycloadducts (101) and (102) in high yield and excellent endo/exo-selectivity (Scheme 39). A density functional theoretical study of the hetero-Diels-Alder reaction between butadiene and acrolein indicates that the endo s-cis is the most stable transition structure in both catalysed and uncatalysed reactions.The formation and use of amino acid-derived chiral acylnitroso hetero-Diels-Alder reactions in organic synthesis has been reviewed. The 4 + 2-cycloadditions of A-acylthioformamides as dienophiles have been reviewed. ... 

The (diphenylmethylene)aminocyclobutenecarboxylates 109 obtained by rearrangement of the DMPA-H adducts of 1-Me, 2-Me, contain a 2-azadiene unit and a cyclobutene moiety. Indeed, the parent compound 109 a reacted with 4-phenyl-l,2,4-triazoline-3,5-dione (PTAD, [80]) at room temperature in a [4-1-2] cycloaddition mode to yield the tricyclic tetraazaundecene 132 in almost quantitative yield (Scheme 44) [8]. As substituted cyclobutenes, compounds 109 should be capable of opening up to the corresponding butadienes [1, 2b, 811. When compounds 109 were subjected to flash vacuum pyrolysis, the dihydro-isoquinolines 135 were obtained, presumably via the expected ring-opened intermediates 133, which subsequently underwent bn electrocyclization followed by a 1,5-shift, as is common for other 3-aza-l,3,5-hexatrienes [82]. 

---