1.3- Butadiene 4 + 3 cycloaddition reactions

Refer to the molecular orbital diagrams of allyl cation (Figure 10 13) and those presented earlier in this chapter for ethylene and 1 3 butadiene (Figures 10 9 and 10 10) to decide which of the following cycloaddition reactions are allowed and which are forbidden according to the Woodward-Floffmann rules... 

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

How do orbital symmetry requirements relate to [4tc - - 2tc] and other cycloaddition reactions Let us constmct a correlation diagram for the addition of butadiene and ethylene to give cyclohexene. For concerted addition to occur, the diene must adopt an s-cis conformation. Because the electrons that are involved are the n electrons in both the diene and dienophile, it is expected that the reaction must occur via a face-to-face rather than edge-to-edge orientation. When this orientation of the reacting complex and transition state is adopted, it can be seen that a plane of symmetry perpendicular to the planes of the... 

When the orbitals have been classified with respect to symmetry, they can be arranged according to energy and the correlation lines can be drawn as in Fig. 11.10. From the orbital correlation diagram, it can be concluded that the thermal concerted cycloadditon reaction between butadiene and ethylene is allowed. All bonding levels of the reactants correlate with product ground-state orbitals. Extension of orbital correlation analysis to cycloaddition reactions involving other numbers of n electrons leads to the conclusion that the suprafacial-suprafacial addition is allowed for systems with 4n + 2 n electrons but forbidden for systems with 4n 7t electrons. 

In a definitive study of butadiene s reaction with l,l-dichloro-2,2-difluoio-ethylene, Bartlett concluded that [2+4] adducts of acyclic dienes with fluorinated ethylenes are formed through a mixture of concerted and nonconcerted, diradical pathways [67] The degree of observed [2+4] cycloaddition of fluorinated ethylenes IS related to the relative amounts of transoid and cisoid conformers of the diene, with very considerable (i.e., 30%) Diels-Alder adduct being observed in competition with [2+2] reaction, for example, in the reaction of 1,1 -dichloro-2,2-difluoro-ethylene with cyclopentadiene [9, 68]... 

One of the features of Diels-Alder reactions with most alkyl and aryl nitriles that has made them rather unattractive as dienophiles is the requirement of very high reaction temperatures Again, only when electron-withdrawing substituents are directly bonded to the nitnle function do [4+2] cycloaddition reactions occur at reasonably low temperatures [ 48, 231, 232] A high yield [4+2] cycloaddition was observed on reaction of 4,4-bis(trifluoromethyl) 1 thia-3-aza-l,3-butadienes with trifluoroacetonitrile at 150 °C [225]... 

In certain cases, multiple frontier orbital interactions must be considered. This is particularly true of cycloaddition reactions, such as the Diels-Alder reaction between 1,3-butadiene and ethene. 

There have been few mechanistic studies of Lewis acid-catalyzed cycloaddition reactions with carbonyl compounds. Danishefsky et ah, for example, concluded that the reaction of benzaldehyde 1 with trans-l-methoxy-3-(trimethylsilyloxy)-l,3-di-methyl-1,3-butadiene (Danishefsky s diene) 2 in the presence of BF3 as the catalyst proceeds via a stepwise mechanism, whereas a concerted reaction occurs when ZnCl2 or lanthanides are used as catalysts (Scheme 4.3) [7]. The evidence of a change in the diastereochemistry of the reaction is that trans-3 is the major cycloaddition product in the Bp3-catalyzed reaction, whereas cis-3 is the major product in, for example, the ZnCl2-catalyzed reaction - the latter resulting from exo addition (Scheme 4.3). 

The reaction course of the cycloaddition reaction can also be dependent on the Lewis acid complex used as the catalyst. When the substrate contains an allylic C-H bond, both a cycloaddition and an ene reaction can occur. In the reaction of glyoxylate 4 with 2,3-dimethyl-l,3-butadiene 5 both the cycloaddition product 6... 

Chiral BOX-zinc(II) complexes can also catalyze the cycloaddition reaction of glyoxylates with, e.g., 2,3-dimethyl-l,3-butadiene and 1,3-cyclohexadiene [36]. The reaction gave for the former diene a higher cycloaddition product/ene product ratio compared with the corresponding chiral copper(II) complexes the ee, however, was slightly reduced. For the reaction of 1,3-cyclohexadiene slightly lower yield and ee were also found. 

Because ketones are generally less reactive than aldehydes, cycloaddition reaction of ketones should be expected to be more difficult to achieve. This is well reflected in the few reported catalytic enantioselective cycloaddition reactions of ketones compared with the many successful examples on the enantioselective reaction of aldehydes. Before our investigations of catalytic enantioselective cycloaddition reactions of activated ketones [43] there was probably only one example reported of such a reaction by Jankowski et al. using the menthoxyaluminum catalyst 34 and the chiral lanthanide catalyst 16, where the highest enantiomeric excess of the cycloaddition product 33 was 15% for the reaction of ketomalonate 32 with 1-methoxy-l,3-butadiene 5e catalyzed by 34, as outlined in Scheme 4.26 [16]. 

A simple approach for the formation of 2-substituted 3,4-dihydro-2H-pyrans, which are useful precursors for natural products such as optically active carbohydrates, is the catalytic enantioselective cycloaddition reaction of a,/ -unsaturated carbonyl compounds with electron-rich alkenes. This is an inverse electron-demand cycloaddition reaction which is controlled by a dominant interaction between the LUMO of the 1-oxa-1,3-butadiene and the HOMO of the alkene (Scheme 4.2, right). This is usually a concerted non-synchronous reaction with retention of the configuration of the die-nophile and results in normally high regioselectivity, which in the presence of Lewis acids is improved and, furthermore, also increases the reaction rate. 

In an investigation by Yamabe et al. [9] of the fine tuning of the [4-1-2] and [2-1-4] cycloaddition reaction of acrolein with butadiene catalyzed by BF3 and AICI3 using a larger basis set and more sophisticated calculations, the different reaction paths were also studied. The activation energy for the uncatalyzed reaction were calculated to be 17.52 and 16.80 kcal mol for the exo and endo transition states, respectively, and is close to the experimental values for s-trans-acrolein. For the BF3-catalyzed reaction the transition-state energies were calculated to be 10.87 and 6.09 kcal mol , for the exo- and endo-reaction paths, respectively [9]. The calculated transition-state structures for this reaction are very asynchronous and similar to those obtained by Houk et al. The endo-reaction path for the BF3-catalyzed reaction indicates that an inverse electron-demand C3-0 bond formation (2.635 A... 

The Diels-Alder reaction,is a cycloaddition reaction of a conjugated diene with a double or triple bond (the dienophile) it is one of the most important reactions in organic chemistry. For instance an electron-rich diene 1 reacts with an electron-poor dienophile 2 (e.g. an alkene bearing an electron-withdrawing substituent Z) to yield the unsaturated six-membered ring product 3. An illustrative example is the reaction of butadiene 1 with maleic anhydride 4 ... 

The Diels-Alder cycloaddition reaction (Section 14.4) is a pericvclic process that takes place between a diene (four tt electrons) and a dienophile (two tr electrons) to yield a cyclohexene product. Many thousands of examples of Diels-Alder reactions are known. They often take place easily at room temperature or slightly above, and they are stereospecific with respect to substituents. For example, room-temperature reaction between 1,3-butadiene and diethyl maleate (cis) yields exclusively the cis-disubstituted cyclohexene product. A similar reaction between 1,3-butadiene and diethyl fumarate (trans) yields exclusively the trans-disubstituted product. 

Ahern and Gokel (1979) briefly mention that (jE -arenediazocyanides also react with a variety of dienes (cyclopentadiene, cyclohexadiene, butadiene, ( )-piperylene, etc.) in a [4+ 2]-cycloaddition reaction with formation of tetrahydropyridazines (Scheme 6-31). Here the two azo nitrogen atoms of the diazocyanide react as a dieneophile in a bis-aza Diels-Alder reaction. 

Synthesis of functionalized aryloxy 1,3-butadienes and their transformation to dienyl ethers via Diels-Alder cycloaddition reactions [136]... 

Cycloaddition reactions of (E)-l-acetoxybutadiene (18a) and (E)-l-methoxy-butadiene (18b) with the acrylic and crotonic dienophiles 19 were studied under high pressure conditions [9] (Table 5.1). Whereas the reactions of 18a with acrylic dienophiles regioselectively and stereoselectively afforded only ortho-enJo-adducts 20 in fair to good yields, those with crotonic dienophiles did not work. Similar results were obtained in the reactions with diene 18b. The loss of reactivity of the crotonic dienophiles has been ascribed to the combination of steric and electronic effects due to the methyl group at the )S-carbon of the olefinic double bond. 

Cycloaddition reactions of the simple alkyl and aryl aldehydes 65 with (E)-l-methoxy-1,3-butadiene (18b) under high pressure conditions afforded adducts 66 and 67 in reasonable to good yields [2g, 23]. A marked preference for the c applying pressure enforces cnJo-addition (Scheme 5.5). Using mild Lewis-acid catalysts [24], such as Eu(fod)3, Yb(fod)3, or Eu(hfc)3, in combination with pressure, allows good results to be obtained with the added advantage of reducing the pressure to 10 kbar [25] (Scheme 5.5). 

An electron donating butadiene with the methoxy substituents at the 1 and 4 positions was calculated to undergo a concerted [4+2] cycloaddition reaction with TCNE as... 

Diels-Alder reactions are allowed by orbital symmetry in the delocalization band and so expected to occur on the surface. In fact, [4-1-2] cycloaddition reaction occurs on the clean diamond (100)-2 x 1 surface, where the surface dimer acts as a dienophile. The surface product was found to be stable up to approximately 1,000 K [59, 60], 1,3-Butadiene attains high coverage as well as forms a thermally stable adlayer on reconstructed diamond (100)-2 x 1 surface due to its ability to undergo [4h-2] cycloaddition [61],... 

The cycloaddition reactions of the anhydrides (88a-88e) with acyclic dienes (butadiene and 1,4-dimethylbuta-l,3-diene) were conducted at 23 °C in dichlo-... 

In 1989 Jutzi et al. reported the reaction of decamethylsilicocene 50 with tri-n-butylphosphine selenide in benzene at room temperature, leading to almost quantitative formation of a 1,3,2,4-diselenadisiletane derivative 52, a head-to-tail [2+2] cycloaddition reaction product of the initially formed silaneselone 51.35 The intermediacy of silaneselone 51 was experimentally supported by the reaction in the presence of 2,3-dimethyl-1,3-butadiene resulting in the formation of the corresponding [2+4] cycloaddition reaction product 53 (Scheme 14). 

The reversible reaction between butadiene and sulfur dioxide, which yields sulfolene, has been known for a long time. Such cycloaddition reactions of sulfur dioxide, and of other sulfur oxides, have been reviewed by Block.49... 

The scope and efficiency of [4+2] cycloaddition reactions used for the synthesis of pyridines continue to improve. Recently, the collection of dienes participating in aza-Diels Alder reactions has expanded to include 3-phosphinyl-l-aza-l,3-butadienes, 3-azatrienes, and l,3-bis(trimethylsiloxy)buta-l, 3-dienes (1,3-bis silyl enol ethers), which form phosphorylated, vinyl-substituted, and 2-(arylsulfonyl)-4-hydroxypyridines, respectively <06T1095 06T7661 06S2551>. In addition, efforts to improve the synthetic efficiency have been notable, as illustrated with the use of microwave technology. As shown below, a synthesis of highly functionalized pyridine 14 from 3-siloxy-l-aza-1,3-butadiene 15 (conveniently prepared from p-keto oxime 16) and electron-deficient acetylenes utilizes microwave irradiation to reduce reaction times and improve yields <06T5454>. 

Cycloaddition of 2-alkoxy-l,3-butadienes, H2C=C(OAlk)CH=CH2, and nitrile oxides to give isoxazolines 51 proceeds with the participation of only one of the conjugated C=C bonds. With benzonitrile oxide, only the vinyl group in alkoxydienes participates in cycloaddition reactions while in the case of phenyl-glyoxylonitrile oxide both double bonds react (222). Nitrile oxides RC=NO react with iron complexed trienes 52. The reaction proceeds with good yield and diastereoselectivity ( 90/10) to give isoxazolines 53 (223). 

The [4 + 2]-cycloaddition reaction of dienylallene 204 with TCNE took place at 70 °C to give the adduct 205 in good yield [173], The dienylallene behaved not as butadiene but vinylallene, partly owing to the thermodynamic stability of the adduct. 

---