Pyrolysis butadiene

Use Source (by various cracking processes) of gasoline, special naphthas, and petroleum chemicals, especially ethylene. Cracking for ethylene also produces propylene, butadiene, pyrolysis gasoline, and fuel oil source of synthetic natural gas. 

The 1,3-butadienyl radical is primarily a by-product of butadiene pyrolysis in this system but results from vinyl addition to acetylene in flames of other aliphatic fuels. In aromatic flames 1,3-butadienyl may be produced by oxidative and pyrolytic decomposition of aromatic species, as suggested in a study of benzene flames (10) ... 

Pyrolysis of the diacetate gives a 2.5 1 mixture of trans,trans- and cis,cis-diacetoxy-alkyl-butadienes. Pyrolysis of (331) at 450 °C gives (333), probably via (332). Contrary to a previous report, (333) is not formed from benzyne and cycloheptatriene. The ketone (334) has been made from (335) plus benzyne followed by ozonolysis. Pyrolysis of (334) gives (336) and (337). ... 

Analytical investigations may be undertaken to identify the presence of an ABS polymer, characterize the polymer, or identify nonpolymeric ingredients. Fourier transform infrared (ftir) spectroscopy is the method of choice to identify the presence of an ABS polymer and determine the acrylonitrile—butadiene—styrene ratio of the composite polymer (89,90). Confirmation of the presence of mbber domains is achieved by electron microscopy. Comparison with available physical property data serves to increase confidence in the identification or indicate the presence of unexpected stmctural features. Identification of ABS via pyrolysis gas chromatography (91) and dsc ((92) has also been reported. 

Isoprene (2-methyl-1,3-butadiene) can be telomerized in diethylamine with / -butyUithium as the catalyst to a mixture of A/,N-diethylneryl- and geranylamines. Oxidation of the amines with hydrogen peroxide gives the amine oxides, which, by the Meisenheimer rearrangement and subsequent pyrolysis, produce linalool in an overall yield of about 70% (127—129). 

By-products from EDC pyrolysis typically include acetjiene, ethylene, methyl chloride, ethyl chloride, 1,3-butadiene, vinylacetylene, benzene, chloroprene, vinyUdene chloride, 1,1-dichloroethane, chloroform, carbon tetrachloride, 1,1,1-trichloroethane [71-55-6] and other chlorinated hydrocarbons (78). Most of these impurities remain with the unconverted EDC, and are subsequendy removed in EDC purification as light and heavy ends. The lightest compounds, ethylene and acetylene, are taken off with the HCl and end up in the oxychlorination reactor feed. The acetylene can be selectively hydrogenated to ethylene. The compounds that have boiling points near that of vinyl chloride, ie, methyl chloride and 1,3-butadiene, will codistiU with the vinyl chloride product. Chlorine or carbon tetrachloride addition to the pyrolysis reactor feed has been used to suppress methyl chloride formation, whereas 1,3-butadiene, which interferes with PVC polymerization, can be removed by treatment with chlorine or HCl, or by selective hydrogenation. 

The pattern of commercial production of 1,3-butadiene parallels the overall development of the petrochemical industry. Since its discovery via pyrolysis of various organic materials, butadiene has been manufactured from acetylene as weU as ethanol, both via butanediols (1,3- and 1,4-) as intermediates (see Acetylene-DERIVED chemicals). On a global basis, the importance of these processes has decreased substantially because of the increasing production of butadiene from petroleum sources. China and India stiU convert ethanol to butadiene using the two-step process while Poland and the former USSR use a one-step process (229,230). In the past butadiene also was produced by the dehydrogenation of / -butane and oxydehydrogenation of / -butenes. However, butadiene is now primarily produced as a by-product in the steam cracking of hydrocarbon streams to produce ethylene. Except under market dislocation situations, butadiene is almost exclusively manufactured by this process in the United States, Western Europe, and Japan. 

Significant products from a typical steam cracker are ethylene, propylene, butadiene, and pyrolysis gasoline. Typical wt % yields for butylenes from a steam cracker for different feedstocks are ethane, 0.3 propane, 1.2 50% ethane/50% propane mixture, 0.8 butane, 2.8 hill-range naphtha, 7.3 light gas oil, 4.3. A typical steam cracking plant cracks a mixture of feedstocks that results in butylenes yields of about 1% to 4%. These yields can be increased by almost 50% if cracking severity is lowered to maximize propylene production instead of ethylene. 

Buta-1,3-diene, 1 -(2 -furyl)-pyrolysis, 4, 600 Buta-1,3-diene, 1-mercapto-thiophenes from, 4, 887 Buta-1,3-diene, 1 -(1 -methyl-2-pyrrolyl)-thermal cyclization, 4, 285 Buta-1,3-diene, l-(2-thienyl)-electrocyclization, 4, 748 Butadienes... 

Propane cracking is similar to ethane except for the furnace temperature, which is relatively lower (longer chain hydrocarbons crack easier). However, more by-products are formed than with ethane, and the separation section is more complex. Propane gives lower ethylene yield, higher propylene and butadiene yields, and significantly more aromatic pyrolysis gasoline. Residual gas (mainly H2 and methane) is about two and half times that produced when ethane is used. Increasing the severity... 

Because of the high pyrolysis temperature, the C4-fraction contains quantities of vinyl acetylene and ethyl acetylene, the removal of which prior to the recovery of butadiene is necessary in certain cases, particularly if butadiene of low acetylene content is desired. Similar considerations apply to effractions obtained by the dehydrogenation of n-butane and n-butenes. 

Isolable pyrazolines (183) are obtained from the (1,3-butadiene)phosphonic acid esters (182 X=S02Me, COOalkyl R "=H or Me R2=Me or Ph) (products from (182 X=CN) are thermo-labile) and diazomethane. Pyrolysis of the phosphorylated pyrazolines affords phosphonopentadienes rather than phosphono-cyclopropanes (contrast (184)) and with NaH give pyrazoles or pyrazolephbsphonic acid esters. 

Conlin148 also studied the pyrolysis of 1-methyl-1-silacyclobutane in the presence of excess butadiene at various temperatures where the decomposition followed first-order kinetics and where the silene isomerized to the isomeric silylene prior to reacting with the butadiene. The value for the preexponential factor A for the silene-to-silylene isomerization was found to be 9.6 0.2 s-1 and the Ewl for the isomerization was 30.4 kcal mol-1 with A// = 28.9 0.7 kcal mol-1 and AS = -18.5 0.9 cal mol-1 deg. More recently, the photochemical ring opening of l,l-dimethyl-2-phenylcyclobut-3-ene and its recyclization was studied. The Eact for cycli-zation was 9.4 kcal mol-1.113... 

On the other hand, numerous examples are already known in which monomeric metaphosphoric esters are generated by thermolysis reactions. Most worthy of mention in this context is the gas phase pyrolysis of the cyclic phosphonate 150 which leads via a retro-Diels-Alder reaction to butadiene and monomeric methyl metaphosphate (151) 108,109, no). While most of the phosphorus appears as pyrophosphate and trimeric and polymeric metaphosphate, a low percentage (<5%) of products 152 and 153 is also found on condensation of the pyrolyzate in a cold trap containing diethylaniline or N,N,N, N,-tetraethyl-m-phenylene-diamine. The... 

Levin, B.C., A summary of the NBS litterature Reviews on the chemical nature and toxicity of the pyrolysis and combustion from seven plastics acrylonitrite-butadien-styrenes (ABS), nylons, polyesters, polyetylenes, polysterenes, poly(vinyl-chlorides) and rigid polyurethane foams, KB SIR 85-3267, 1986... 

The first total synthesis of D/E-trans annellated yohimbines, e.g., ( )-yohim-bine (74) and ( )-pseudoyohimbine (88), was published in preliminary form by van Tamelen and co-workers (218) in 1958, while full details (219) appeared only in 1969. Key building block 393, prepared from butadiene and p-quinone, was condensed with tryptamine, yielding unsaturated amide 394, which was subsequently transformed to dialdehyde derivative 396. Cyclization of the latter resulted in pseudoyohimbane 397. Final substitution of ring E was achieved via pyrolysis, oxidation, and esterification steps. As a result of the reaction sequence, ( )-pseudoyohimbine was obtained, from which ( )-yohimbine could be prepared via C-3 epimerization. 

Oligomeric products, obtaining, 16 106 Oligomeric titanates, pyrolysis of, 25 121 Oligomerization, 23 329 acetylene, 1 181 butadiene, 4 373-374 in higher olefins, 17 712 ionic liquids in, 26 885-887 olefin, 16 111... 

The photolysis of the furan derivatives 78 yielded the butadienals 79 as the main products [123], Further isomerizations leading to allenic esters used the radiation of a cyclopropene-1 -carboxylic acid ester [124] or applied flash vacuum pyrolysis to 3 -ethoxy cyclobut- 2-en-l-one[125]. 

Another method to prepare allenyl ketones uses flash vacuum pyrolysis of the heterocycles 121 (Scheme 7.19) [163], This elimination of carbon monoxide is at least formally a cheletropic reaction. Highly reactive allenes such as esters and nitriles of type 124 or unsubstituted butadienal can be generated if retro-Diels-Alder reaction of 123 or similar precursors, respectively, is performed by flash vacuum pyrolysis [164]. 

On pyrolysis, in addition to the expected C5 olefins, ethylcyclopropane also yields butadiene and methane (this constitutes an important reaction path, the yield of butadiene being about 20% of the total products). This type of decomposition is probably general for ethyl-substituted cyclopropanes, since 1,1-diethylcyclopropane yields 2-ethylbutadiene and methane as well as C7 olefins (Frey and Marshall, 1965). It is possible that the decomposition to the butadiene is also a simple unimolecular process via a transition state such as shown below. 

The (diphenylmethylene)aminocyclobutenecarboxylates 109 obtained by rearrangement of the DMPA-H adducts of 1-Me, 2-Me, contain a 2-azadiene unit and a cyclobutene moiety. Indeed, the parent compound 109 a reacted with 4-phenyl-l,2,4-triazoline-3,5-dione (PTAD, [80]) at room temperature in a [4-1-2] cycloaddition mode to yield the tricyclic tetraazaundecene 132 in almost quantitative yield (Scheme 44) [8]. As substituted cyclobutenes, compounds 109 should be capable of opening up to the corresponding butadienes [1, 2b, 811. When compounds 109 were subjected to flash vacuum pyrolysis, the dihydro-isoquinolines 135 were obtained, presumably via the expected ring-opened intermediates 133, which subsequently underwent bn electrocyclization followed by a 1,5-shift, as is common for other 3-aza-l,3,5-hexatrienes [82]. 

Butadiene was first produced in the late nineteenth century by pyrolysis of petroleum hydrocarbons (Kirshenbaiun, 1978). Commercial production started in the 1930s. 

T. Bhaskar, K. Murai, T. Matsui, M.A. Brebu, M.A. Uddin, A. Muto, Y. Sakata, and K. Murata, Studies on thermal degradation of acrylonitrile-butadiene-styrene copolymer (ABS-br) containing brominated flame retardant, J. Anal. Appl. Pyrolysis, 70(2) 369-381, December 2003. 

---