Boronates properties

C, b.p. 91 C, and has very similar properties to boron chloride but is a stronger Lewis acid. Diboron tetrabromide BjBr, is also known. 

Boron tri-iodide, Blj (BClj plus HI at red heat or I2 plus NaBH ), m.p. 43°C, b.p. 2iO°C. It has very similar properties to boron trichloride. 

CHR) , formed, e g. from the reaction of diazomethane and alcohols or hydroxylamine derivatives in the presence of boron compounds or with metal compounds. Poly-methylene is formally the same as polyethene and the properties of the various polymers depend upon the degree of polymerization and the stereochemistry. 

The data in Table 7.1 show that, as expected, density, ionic radius, and atomic radius increase with increasing atomic number. However, we should also note the marked differences in m.p. and liquid range of boron compared with the other Group III elements here we have the first indication of the very large difference in properties between boron and the other elements in the group. Boron is in fact a non-metal, whilst the remaining elements are metals with closely related properties. 

The BF4 ion has a regular tetrahedral configuration. The most important property of boron trifluoride is its great capacity to act as an electron pair acceptor (Lewis acid). Some examples of adducts are ... 

The tribromide and triodide of both boron and aluminium can be made by the direct combination of the elements although better methods are known for each halide. The properties of each halide closely resemble that of the chloride. 

Boranes are typical species with electron-deficient bonds, where a chemical bond has more centers than electrons. The smallest molecule showing this property is diborane. Each of the two B-H-B bonds (shown in Figure 2-60a) contains only two electrons, while the molecular orbital extends over three atoms. A correct representation has to represent the delocalization of the two electrons over three atom centers as shown in Figure 2-60b. Figure 2-60c shows another type of electron-deficient bond. In boron cage compounds, boron-boron bonds share their electron pair with the unoccupied atom orbital of a third boron atom [86]. These types of bonds cannot be accommodated in a single VB model of two-electron/ two-centered bonds. 

The isotope boron-10 is used as a control for nuclear reactors, as a shield for nuclear radiation, and in instruments used for detecting neutrons. Boron nitride has remarkable properties and can be used to make a material as hard as diamond. The nitride also behaves like an electrical insulator but conducts heat like a metal. 

It also has lubricating properties similar to graphite. The hydrides are easily oxidized with considerable energy liberation, and have been studied for use as rocket fuels. Demand is increasing for boron filaments, a high-strength, lightweight material chiefly employed for advanced aerospace structures. 

The product of this reaction a Lewis acid Lewis base complex called informally boron tnfluonde etherate may look unusual but it is a stable species with properties different from those of the reactants Its boiling point (126°C) for example is much higher than that of boron tnfluonde—a gas with a boiling point of — 100°C—and diethyl ether a liquid that boils at 34°C... 

The section on Spectroscopy has been retained but with some revisions and expansion. The section includes ultraviolet-visible spectroscopy, fluorescence, infrared and Raman spectroscopy, and X-ray spectrometry. Detection limits are listed for the elements when using flame emission, flame atomic absorption, electrothermal atomic absorption, argon induction coupled plasma, and flame atomic fluorescence. Nuclear magnetic resonance embraces tables for the nuclear properties of the elements, proton chemical shifts and coupling constants, and similar material for carbon-13, boron-11, nitrogen-15, fluorine-19, silicon-19, and phosphoms-31. 

Thousands of compounds of the actinide elements have been prepared, and the properties of some of the important binary compounds are summarized in Table 8 (13,17,18,22). The binary compounds with carbon, boron, nitrogen, siUcon, and sulfur are not included these are of interest, however, because of their stabiUty at high temperatures. A large number of ternary compounds, including numerous oxyhaUdes, and more compHcated compounds have been synthesized and characterized. These include many intermediate (nonstoichiometric) oxides, and besides the nitrates, sulfates, peroxides, and carbonates, compounds such as phosphates, arsenates, cyanides, cyanates, thiocyanates, selenocyanates, sulfites, selenates, selenites, teUurates, tellurites, selenides, and teUurides. 

The boron atom in boron trifluoride is hybridized to the sp planar configuration and consequently is coordinatively unsaturated, ie, a Lewis acid. Its chemistry centers around satisfying this unsaturation by the formation with Lewis bases of adducts that are nearly tetrahedral sp [ The electrophilic properties (acid strengths) of the trihaloboranes have been found to increase in the order BF < BCl < BBr < BI (3,4). 

Chemical Properties. In addition to the reactions Hsted in Table 3, boron trifluoride reacts with alkali or alkaline-earth metal oxides, as well as other inorganic alkaline materials, at 450°C to yield the trimer trifluoroboroxine [13703-95-2] (BOF), MBF, and MF (29) where M is a univalent metal ion. The trimer is stable below — 135°C but disproportionates to B2O2 and BF at higher temperatures (30). 

Properties. Fluoroboric acid is stable in concentrated solutions, and hydroly2es slowly in aqueous solution to hydroxyduoroborates. For the stabihty of the duoroborate species, see Reference 3. The equiUbrium quotients (4,5) in 1 molal NaCl at 25°C show the strong affinity of boron for duo ride ... 

Table 1 Hsts some of the physical properties of duoroboric acid. It is a strong acid in water, equal to most mineral acids in strength and has a p p o of —4.9 as compared to —4.3 for nitric acid (9). The duoroborate ion contains a neady tetrahedral boron atom with almost equidistant B—F bonds in the sohd state. Although lattice effects and hydrogen bonding distort the ion, the average B—F distance is 0.138 nm the F—B—F angles are neady the theoretical 109° (10,11). Raman spectra on molten, ie, Hquid NaBF agree with the symmetrical tetrahedral stmcture (12).

Cationic polymerization of coal-tar fractions has been commercially achieved through the use of strong protic acids, as well as various Lewis acids. Sulfuric acid was the first polymerization catalyst (11). More recent technology has focused on the Friedel-Crafts polymerization of coal fractions to yield resins with higher softening points and better color. Typical Lewis acid catalysts used in these processes are aluminum chloride, boron trifluoride, and various boron trifluoride complexes (12). Cmde feedstocks typically contain 25—75% reactive components and may be refined prior to polymerization (eg, acid or alkali treatment) to remove sulfur and other undesired components. Table 1 illustrates the typical components found in coal-tar fractions and their corresponding properties. 

Lithium Nitride. Lithium nitride [26134-62-3], Li N, is prepared from the strongly exothermic direct reaction of lithium and nitrogen. The reaction proceeds to completion even when the temperature is kept below the melting point of lithium metal. The lithium ion is extremely mobile in the hexagonal lattice resulting in one of the highest known soHd ionic conductivities. Lithium nitride in combination with other compounds is used as a catalyst for the conversion of hexagonal boron nitride to the cubic form. The properties of lithium nitride have been extensively reviewed (66). 

Soft magnetic materials are characterized by high permeabiUty and low coercivity. There are sis principal groups of commercially important soft magnetic materials iron and low carbon steels, iron—siUcon alloys, iron—aluminum and iron—aluminum—silicon alloys, nickel—iron alloys, iron-cobalt alloys, and ferrites. In addition, iron-boron-based amorphous soft magnetic alloys are commercially available. Some have properties similar to the best grades of the permalloys whereas others exhibit core losses substantially below those of the oriented siUcon steels. Table 1 summarizes the properties of some of these materials. 

Electronic-Grade MMCs. Metal-matrix composites can be tailored to have optimal thermal and physical properties to meet requirements of electronic packaging systems, eg, cotes, substrates, carriers, and housings. A controUed thermal expansion space tmss, ie, one having a high precision dimensional tolerance in space environment, was developed from a carbon fiber (pitch-based)/Al composite. Continuous boron fiber-reinforced aluminum composites made by diffusion bonding have been used as heat sinks in chip carrier multilayer boards. 

---