Benzyl methyl sulfate

In 1998, Wilson Greatbatch Technologies found that chain sulfates, such as dial-lyl sulfate (45) and benzyl methyl sulfate (46), as well as chain sulfates including silyl groups, such as bis(trimethylsilyl) sulfate (47), can be used as additives in small quantities [76],... 

SuIfona.tlon, Sulfonation is a common reaction with dialkyl sulfates, either by slow decomposition on heating with the release of SO or by attack at the sulfur end of the O—S bond (63). Reaction products are usually the dimethyl ether, methanol, sulfonic acid, and methyl sulfonates, corresponding to both routes. Reactive aromatics are commonly those with higher reactivity to electrophilic substitution at temperatures > 100° C. Tn phenylamine, diphenylmethylamine, anisole, and diphenyl ether exhibit ring sulfonation at 150—160°C, 140°C, 155—160°C, and 180—190°C, respectively, but diphenyl ketone and benzyl methyl ether do not react up to 190°C. Diphenyl amine methylates and then sulfonates. Catalysis of sulfonation of anthraquinone by dimethyl sulfate occurs with thaHium(III) oxide or mercury(II) oxide at 170°C. Alkyl interchange also gives sulfation. 

Cinnolin-3(2//)-one (7) is methylated with diazomethane or methyl sulfate to give 2-methylcinnolin-3(2H)-one. In a similar manner, benzylation with benzyl chloride, cyanoethylation with acrylonitrile in the presence of benzyltrimethylammonium hydroxide and glucosidation with tetra-O-acetyl-a-o-glucopyranosyl bromide in the presence of a base affords the corresponding 2-substituted cinnolin-3(2//)-ones. However, glucosidation of the silver salt of cinnolin-3(2//)-one produces the corresponding O-substituted compound. 

Dimethyl sulfide Methyl sulfate N-Acetylcytosine Benzyl 4,6-0-benzylidene-2-0-benz Methyl 4,6-0-benzylidene-2-deoxy-j... 

A simple method of chemical modification of cellulose was proposed by Zhdanov and coworkers [126]. This method was based on the hydrophobic mercerization of cellulose in a superbasic medium such as the dimethylsulf-oxide-solid sodium hydroxide mixture, followed by etherification or esterification. Methyl sulfate, benzyl chloride, acetic anhydride, methyl bromoacetate, triethyleneglycol ditosylate, and p-toluenesulfonyl chloride were used as the modification agents. This method simplified appreciably the preparation of acetylcellulose and methoxycarbonylmethylcellulose. Cellulose ethers can be prepared with high etherification yield, uniform substitution, and good oxidation resistance by alkalinization and alkylation of aqueous cellulose in the presence of water-miscible cyclic ethers as suspending agents [127]. 

The 2-methyl isomer behaved similarly. In these examples, the formyl group is removed by the residual alkalinity, but in the following, one formyl group is lost before the reaction begins. 3-Benzyl-4-diformylaminotriazole-5-carboxamide and methyl sulfate in N sodium hydroxide gave 3-benzyl-4-methylaminotriazole-5-carboxamide (20°C, 50 min, 85%) [69JCS(C)I52],... 

S,S -[(2,S-dimethyl-l,4-phenylene)bis[methylene-(ethylimino)-1,4-phenyleneazo]]bis[ 1 -benzyl-4-methyl-bis(methyl sulfate)... 

A. Parenteral. Physostigmine salicylate (Antilirium), 1 mg/mL in 1-mL syringes and 2-mL vials (contains benzyl alcohol and bisulfite). Neostigmine methyl-sulfate (Prostigmine, others), 1 1000, 1 2000, 1 4000 in 1- and 10-mL ampules and vials (contain parabens). 

Magnesium arsenide Martonite Methyl bromide Methyl fluoride Methyl mercaptan Methyl sulfate Molybdenum fluoride Nickel carbonyl Nitrogen peroxide Nitrogen trifluoride Nitrosomethylurethane Oleum (fuming sulfuric acid) Oxygen difluoride Paranitro benzyl chloride... 

Dihydrogenated tallow methyl benzyl ammonium chloride. See Dihydrogenated tallow benzylmonium chloride Dihydrogenated tallowoylethyl hydroxyethylmonium methosulfate Synonyms Ethanaminium, 2-hydroxy-N,N-bis [2-(1-oxohydrogenated tallow alkyl) ethyl]-N-methyl-, methyl sulfates (salts)... 

QuaterniZation. Quaternary ammonium compounds are formed by alkylation of alkyl, alkyl dimethyl, dialkyl, and dialkylmethyl fatty amines with methyl chloride, dimethyl sulfate, or benzyl chloride (1,3,7,12,29). 

Alkylations of cinnolin-4(lf/)-one (8) with methyl iodide, ethyl iodide, dimethyl and diethyl sulfates, isopropyl bromide, benzyl chloride, etc. take place predominantly at position 2 to give 2-alkyl-4-hydroxycinnolinium anhydro salts (83), together with small amounts of l-methylcinnolin-4-one (84). 

Various alkylating agents are used for the preparation of pyridazinyl alkyl sulfides. Methyl and ethyl iodides, dimethyl and diethyl sulfate, a-halo acids and esters, /3-halo acids and their derivatives, a-halo ketones, benzyl halides and substituted benzyl halides and other alkyl and heteroarylmethyl halides are most commonly used for this purpose. Another method is the addition of pyridazinethiones and pyridazinethiols to unsaturated compounds, such as 2,3(4//)-dihydropyran or 2,3(4//)-dihydrothiopyran, and to compounds with activated double bonds, such as acrylonitrile, acrylates and quinones. 

It was found that utilization of QAS with increased steric accessibility of exchange center, containing nitrogen atom with three methyl substituents and one super lipophilic substituent, - tris(2,3,4-dodecyloxy)benzyl, - leads to dramatic, up to 7 orders, increase of ISE s selectivity towards sulfate in the presence of single-charged anions. Incorporation of hexyl 4-trifluoro-acetylbenzoate into membrane leads to additional substantial increase - up to 4 orders - in sulfate selectivity. 

IQ. To determine the concentration of chloride ion, - a 5-mL aliquot of the methyl lithium solution is cautiously added to 25 ml of water and the resulting solution is acidified with concentrated sulfuric acid and then treated with 2-3 ml of ferric ammonium sulfate [Fe(NH4)( 04)2 12 H2O] indicator solution and 2-3 ml of benzyl alcohol. The resulting mixture is treated with 10.0 mL of standard aqueous 0.100 M silver nitrate solution and then titrated with standard aqueous 0.100 H potassium thiocyanate solution to a brownish-red endpoint. 

Alkylation at the ind-N of l,2,3,4-tetrahydro-j8-carbolines has been carried out with alkyl halide after treatment with sodamide in the usual manner. Cyanoethylation of a p /r-V-substituted tetrahydro-jS-carboline in the presence of Triton B yields the corresponding 9-cyanoethyl derivative. Similarly, treatment of p / -V-methyl-l,2,3,4,4a,9b-hexahydro-y-carboline with sodamide, followed by benzyl chloride, leads to the ind-A -benzyl-substituted derivatives. l-Oxo-l,2,3,4-tetrahydro-j8-carboline yields the ind-A -methyl derivative directly with dimethyl sulfate.Prolonged treatment with sodium hydride, followed by methyl iodide, yields the 2,9-dimethyl derivative. Heating with sodium hydride in acetone followed by the addition of dimethyl sulfate gives rise to the ind-V-methyl derivative. ... 

ANILINES, BENZYL AMINES, AND ANALOGUES An orally active local anesthetic agent that can be used as an (intiarrhythmic agent is meobenti ne (57). Its patented synthesis starts with -hydroxyphenyl nitrile and proceeds by dimethyl sulfate etherification and Raney nickel reduction to Alkylation of -methyl-dimethylthiourea with completes l.he synthesis of meobenti ne (57). ... 

A solution of 88.5 parts of L-phenylalanine methyl ester hydrochloride in 100 parts of water is neutralized by the addition of dilute aqueous potassium bicarbonate, then is extracted with approximately 900 parts of ethyl acetate. The resulting organic solution is washed with water and dried over anhydrous magnesium sulfate. To that solution is then added 200 parts of N-benzyloxycarbonyl-L-aspartic acid-a-p-nitrophenyl, -benzyl diester, and that reaction mixture is kept at room temperature for about 24 hours, then at approximately 65°C for about 24 hours. The reaction mixture is cooled to room temperature, diluted with approximately 390 parts of cyclohexane, then cooled to approximately -18°C in order to complete crystallization. The resulting crystalline product is isolated by filtration and dried to afford -benzyl N-benzyloxycarbonvI-L-aspartyl-L-phenylalanine methyl ester, melting at about 118.5°-119.5°C. 

Dione 21-Acetate To a stirred solution of 500 mg of 9o-fluoro-11(3,21-dihydroxy-16-methyl-1,4,16-pregnatriene-3,20-dione 21-acetate in 5 ml of benzene and 5 ml of chloroform are added 0.50 ml of t-butyl hydroperoxide and 0.1 ml of a 35% methanolic solution of benzyl-trimethyl ammonium hydroxide. After 18 hours at room temperature, water is added and the mixture thoroughly extracted with chloroform. The chloroform extract is washed with saturated aqueous sodium chloride and dried over magnesium sulfate. Evaporation of the Solvent and crystallization of the residue from acetone-ether gives Bo-fluoro-... 

Benzyl cyanide is first reacted with 2-butylbromide in the presence of sodium amide to give 2-phenyl-3-methylvaleronitrile which is hydrolyzed by sulfuric acid to give 3-methyl-2-phenyl-pentanoic acid. 24 g of 2-phenyl-3-methyl-pentanoic acid are heated for one hour at 175° to 185°C with 30 g of 2-diethylaminoethanol and 0.5 g of sodium methylate. The excess diethyl-aminoethanol is removed in vacuo, the residue is dissolved in 300 cc of 2 N-acetic acid, the acid solution is shaken with ether and made alkaline with concentrated potassium carbonate solution and ice. The ether solution Is washed with water, dried with sodium sulfate and evaporated. The residue is distilled under high vacuum, yielding 20 to 21 g of the basic ester (60% of the theoretical) is obtained, the ester boiling at 98° to 100°C at a pressure of 0.03 mm. The hydrochloride of the ester melts at 112° to 113°C and the methobromide at 100° to 101°C. 

---