Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Radiation measuring background

There is always some level of ambient radioactivity in an environment. This radiation is known as background radiation. Measure and record the background activity by recording the counts registered by the gamma ray detector in 30-s intervals for 5 min. Record the data in Data Table 1. [Pg.30]

Leach, S. CN spectroscopy and cosmic background radiation measurements. Can. J. Chem. 82 (2004) 730-739. [Pg.164]

Background Radiation. If the radiation from a radioactive source is measured, the spectmm also includes contributions from the radiations from the surrounding environment. This includes radiations from the radioactivity in the materials in and around the detector, including the stmcture of the building or nearby earth. There is also cosmic radiation that comes from space and interacts with the earth and atmosphere to produce radiations that may enter the detector, and thus is observed. [Pg.456]

Multichannel instruments are capable of measuring the intensities of the emission lines of up to 60 elements simultaneously. To overcome the effects of possible non-specific background radiation, one or more additional wavelengths may be measured and background correction (see Section 21.12) can be achieved. [Pg.776]

In summary, pulse-height analysis (PHA) prior to a Mossbauer measurement is an essential step in tuning a Mossbauer spectrometer. PHA allows the adjustment of the y-detection system to the Mossbauer photons and the reduction of noise by rejecting nonresonant background radiation. [Pg.37]

The primordial Li abundance was sought primarily because of its ability to constrain the baryon to photon ratio in the Universe, or equivalently the baryon contribution to the critical density. In this way, Li was able to complement estimates from 4He, the primordial abundance of which varied only slightly with baryon density. Li also made up for the fact that the other primordial isotopes, 2H (i.e. D) and 3He, were at that time difficult to observe and/or interpret. During the late 1990 s, however, measurements of D in damped Lyman alpha systems (high column-density gas believed to be related to galaxy discs) provided more reliable constraints on the baryon density than Li could do (e.g. [19]). Even more recently, the baryon density has been inferred from the angular power spectrum of the cosmic microwave background radiation, for example from the WMAP measurements [26]. We consider the role of Li plateau observations post WMAP. [Pg.185]

Establishing a baseline for studies on radiation through measurement of naturally occurring radionuclides and natural background radiation doses... [Pg.1736]

Photomultipliers are generally used to convert the spectral radiation to an electrical current and often phase-sensitive lock-in amplifiers are used to amplify the resulting current. AES and AFS require similar read-out systems because both methods are measuring small signals. The difficulty associated with both these methods is the separation of the signal for the atomic transition of interest from the background radiation emitted by excited molecular species produced in the atom reservoir. AFS phase locks the amplifier detection circuit to the modulation frequency of the spectral source. Modulation of the source is also used in AAS. [Pg.244]

NCRP, Exposure of the Population in the United States and Canada from Natural Background Radiation, Report 94, National Council on Radiation Protection and Measurements, Bethesda, MD, 1987. [Pg.126]

Measure background radiation and radiation emitted by a radioactive isotope. [Pg.98]

Besides the double beam instrument that eliminates background due to light fluctuations from the source by measuring the background radiation from the flame, a second radiation source can be used to determine the absorption of the matrix. [Pg.264]

In the spirit of Lorentz [45], de Broglie, and Vigier, let us postulate the existence of a preferred frame E. Operationally, E may be identified with the frame of cosmic background radiation (CBR), whose isotropic thermal nature was established by measurements during the COBE-FIRAS project [46]. Then, the principle of relativity simply states that all frames that are not accelerated relative to E, are equivalent to it. [Pg.341]

Myrick TE, Berven BA, Haywood FF. 1981. State background radiation levels Results of measurements taken during 1975-1979. Report to the U.S. Department of Energy by Oak Ridge National Library, Oak Ridge, TN. ORNL/TM-7343. [Pg.86]

A second consideration that has been important, at least implicitly, in developing classification systems for radioactive waste is natural background radiation. The presence of a ubiquitous and unavoidable background of radiation and its description in terms of radiation dose provide a measure of the significance of potential exposures of radiation workers and members of the public to any radioactive waste. Levels of radiation in waste materials compared with levels of natural background radiation have played an important role in radioactive waste classification. [Pg.167]

An important application of cosmic background radiation is to provide a test of the reality of the expansion if we are able to measure the temperature of the background at higher redshift it should scale accordingly to ... [Pg.10]

It is actualy possible to measure the temperature of the background radiation through the observations of the ratio of molecular lines the ratio of population on two levels for which the difference of energy is only a few Kelvin and provides a sensitive way to actually measure the temperature of the background. Such lines can be detected in the optical domain. Actually the first detection... [Pg.10]

The 10-R exposure recommended by BEAR included an estimated 5 R from medical radiation, with the remainder derived from all other radiation. The National Council on Radiation Protection and Measurements (NCRP) immediately accepted this recommendation in its report, issued in January 1957. It stated that the population dose "shall not exceed 14 million man-rems per million of population over the period from conception up to age 30 and one-third that amount in each decade thereafter." The age of 30 yr is the approximate average age of reproduction. Background radiation was assumed to be about 4 million rems per million persons and medical radiation about 5 million... [Pg.19]


See other pages where Radiation measuring background is mentioned: [Pg.124]    [Pg.107]    [Pg.124]    [Pg.107]    [Pg.363]    [Pg.174]    [Pg.214]    [Pg.380]    [Pg.945]    [Pg.846]    [Pg.16]    [Pg.203]    [Pg.204]    [Pg.315]    [Pg.375]    [Pg.376]    [Pg.127]    [Pg.217]    [Pg.98]    [Pg.72]    [Pg.180]    [Pg.634]    [Pg.114]    [Pg.208]    [Pg.346]    [Pg.916]    [Pg.1108]    [Pg.152]    [Pg.199]    [Pg.320]    [Pg.100]    [Pg.256]   


SEARCH



Background Radiation Measurements

Background radiation

Radiation measurement

Radiation measuring

© 2024 chempedia.info