Atom transfer radical polymerization reactions

The facile and reversible reaction of propagating species with transition metal halide complexes to form a polymeric halo-compound is one of the key steps in atom transfer radical polymerization (ATRP, see Section 9.4). 

Block copolymers were synthesized by a combination of fipase-catalyzed polymerization and atom transfer radical polymerization (ATRE). " " At first, the polymerization of 10-hydroxydecanoic acid was carried out by using lipase CA as catalyst. The terminal hydroxy group was modified by the reaction with a-bromopropionyl bromide, followed by ATRP of styrene using CuCE2,2 -bipyridine as catalyst system to give the polyester-polystyrene block copolymer. Trichloromethyl-terminated poly(e-CL), which was synthesized by lipase CA-catalyzed polymerization with 2,2,2-trichloroethanol initiator, was used as initiator for ATRP of styrene. 

While in most of the reports on SIP free radical polymerization is utihzed, the restricted synthetic possibihties and lack of control of the polymerization in terms of the achievable variation of the polymer brush architecture limited its use. The alternatives for the preparation of weU-defined brush systems were hving ionic polymerizations. Recently, controlled radical polymerization techniques has been developed and almost immediately apphed in SIP to prepare stracturally weU-de-fined brush systems. This includes living radical polymerization using nitroxide species such as 2,2,6,6-tetramethyl-4-piperidin-l-oxyl (TEMPO) [285], reversible addition fragmentation chain transfer (RAFT) polymerization mainly utilizing dithio-carbamates as iniferters (iniferter describes a molecule that functions as an initiator, chain transfer agent and terminator during polymerization) [286], as well as atom transfer radical polymerization (ATRP) were the free radical is formed by a reversible reduction-oxidation process of added metal complexes [287]. All techniques rely on the principle to drastically reduce the number of free radicals by the formation of a dormant species in equilibrium to an active free radical. By this the characteristic side reactions of free radicals are effectively suppressed. 

The last decades have witnessed the emergence of new living Vcontrolled polymerizations based on radical chemistry [81, 82]. Two main approaches have been investigated the first involves mediation of the free radical process by stable nitroxyl radicals, such as TEMPO while the second relies upon a Kharash-type reaction mediated by metal complexes such as copper(I) bromide ligated with 2,2 -bipyridine. In the latter case, the polymerization is initiated by alkyl halides or arenesulfonyl halides. Nitroxide-based initiators are efficient for styrene and styrene derivatives, while the metal-mediated polymerization system, the so called ATRP (Atom Transfer Radical Polymerization) seems the most robust since it can be successfully applied to the living Vcontrolled polymerization of styrenes, acrylates, methacrylates, acrylonitrile, and isobutene. Significantly, both TEMPO and metal-mediated polymerization systems allow molec-... 

Dynamic formation of graft polymers was synthesized by means of the radical crossover reaction of alkoxyamines by using the complementarity between nitroxide radical and styryl radical (Fig. 8.13) [40]. Copolymer 48 having alkoxyamine units on its side chain was synthesized via atom transfer radical polymerization (ATRP) of TEMPO-based alkoxyamine monomer 47 and MMA at 50°C (Scheme 8.9). The TEMPO-based alkoxyamine-terminated polystyrene 49 was prepared through the conventional nitroxide-mediated free radical polymerization (NMP) procedure [5,41], The mixture of copolymers 48 and 49 was heated in anisole... 

Other catalytic reactions involving a transition-metal allenylidene complex, as catalyst precursor or intermediate, include (1) the dehydrogenative dimerization of tributyltin hydride [116], (2) the controlled atom-transfer radical polymerization of vinyl monomers [144], (3) the selective transetherification of linear and cyclic vinyl ethers under non acidic conditions [353], (4) the cycloisomerization of (V2V-dia-llyltosylamide into 3-methyl-4-methylene-(V-tosylpyrrolidine [354, 355], and (5) the reduction of protons from HBF4 into dihydrogen [238]. 

Initially, the polymerization of macromonomers was achieved by free radical polymerization reactions, which allowed only a limited control of the final properties. With the advent of ROMP and new free radical polymerization techniques, such as atom transfer radical polymerization (ATRP) the control of final properties became more facile (16). ATRP and ROMP techniques can be combined for the synthesis of macroinitiators (17). 

The synthesis of mixed peroxides formed from /-butyl hydroperoxide and carbon-centred radicals has been studied. The reactions were strongly effected by solvents as well as catalytic amounts of Cun/Fem. The kinetic data suggest that the conditions for the Ingold-Fischer persistent radical effect are fulfilled in these cases.191 The use of Cu /Cu" redox couples in mediating living radical polymerization continues to be of interest. The kinetics of atom-transfer radical polymerization (ATRP) of styrene with CuBr and bipyridine have been investigated. The polymer reactions were found to be first order with respect to monomer, initiator and CuBr concentration, with the optimum CuBr Bipy ratio found to be 2 1.192 In related work using CuBr-A-pentyl-2-... 

Atom transfer radical polymerization (ATRP) [52-55]. Active species are produced by a reversible redox reaction, catalyzed by a transition metal/ligand complex (Mtn-Y/Lx). This catalyst is oxidized via the halogen atom transfer from the dormant species (Pn-X) to form an active species (Pn ) and the complex at a higher oxidation state (X-Mtn+1-Y/Lx). 

The need to better control surface-initiated polymerization recently led to the development of controlled radical polymerization techniques. The trick is to keep the concentration of free radicals low in order to decrease the number of side reactions. This is achieved by introducing a dormant species in equilibrium with the active free radical. Important reactions are the living radical polymerization with 2,2,4,4-methylpiperidine N-oxide (TEMPO) [439], reversible addition fragment chain transfer (RAFT) which utilizes so-called iniferters (a word formed from initiator, chain transfer and terminator) [440], and atom transfer radical polymerization (ATRP) [441-443]. The latter forms radicals by added metal complexes as copper halogenides which exhibit reversible reduction-oxidation processes. 

Atomic force microscopy, polysilanes, 3, 599 Atomic layer epitaxy, for semiconductor growth, 12, 11 Atom transfer radical polymerization type reactions, isotope labeling studies, 1, 567... 

Atropisomeric biaryl bisphosphines, in hydrogenation, 10, 2 Atropisomerism, dynamic NMR studies, 1, 421 ATRP, see Atom transfer radical polymerization type reactions rj3-l-Azaallyl complexes, with nickel, 8, 158 6-Aza[3.2.1]bicyclooct-3-ene, via ring-closing metathesis,... 

Triphenylamine derivatives are known to be efficient hole transport materials and are widely used in organic light-emitting devices. Thelakkat et al. reported the synthesis of a 2,2-bipyridine ligand capped with polyfvinyl-triphenylamine) at both ends.97 The polymer chain was synthesized by the atom transfer radical polymerization of 4-bromostyrene using 4,4-bis (chloromethyl)bipyridine as the initiator (Scheme 18). The bromide groups were then replaced by diphenylamine in the presence of palladium catalyst. Polymer 33 was then obtained by the metalation reaction. 

Scheme 1.11 Grafting of polymers via atom transfer radical polymerization (ATRP) using an ester linkage to oxidized MWCNTs. Formation of MWCNT-COCI, reaction with...

Microwave irradiation was applied to the atom transfer radical polymerization (ATRP) of azo-containing acrylates. The polymerization was greatly promoted and the reaction time was shortened from several days to about 1 h. The functional... 

Pansier [2] used the bromomethyl analogue, (II), of the Step 2 product in the atom transfer radical polymerization of methyl methacrylate. Lewandowski [3] prepared the tribromomethyl analogue, (111), by reacting with trimethylolpro-pane and then used this reagent to prepare methyl methacrylate star polymers. A reaction profile is provided in Table 3. 

---