Asbestos resin

Filled Resins. EiEers such as glass fibers, graphite, asbestos, or powered metals are compounded into all three types of PTEE. Compounding is achieved by intimate mixing. Coagulation of the polymer with a filler produces a filled fine powder. 

A acrylonitrile potassium salts of dispro-portionated resin acids and fatty acid 31 9.5 41 maximum hot-oil and plasticizer resistance asbestos binder, back coatings... 

Other. Vinyl acetate resins are useful as antishrinking agents for glass fiber-reinforced polyester mol ding resins (165). Poly(vinyl acetate)s are also used as binders for numerous materials, eg, fibers, leather (qv), asbestos, sawdust, sand, clay, etc, to form compositions that can be shaped with heat and pressure. Joint cements, taping compounds, caulks, and fillers are other uses. 

During the late 1960s and 1970s, the finding of health problems associated with heavy exposure to airborne asbestos fibers led to a strong reduction (or ban) in the use of asbestos fibers for thermal insulation. In most of the current applications, asbestos fibers are contained within a matrix, typically cement or organic resins. 

The main characteristic properties of asbestos fibers that can be exploited in industrial appHcations (8) are their thermal, electrical, and sound insulation nonflammabiUty matrix reinforcement (cement, plastic, and resins) adsorption capacity (filtration, Hquid sterilization) wear and friction properties (friction materials) and chemical inertia (except in acids). These properties have led to several main classes of industrial products or appHcations... 

Asbestos fibers have likewise been used in reinforcement of plastics such as poly(vinyl chloride), phenoHcs, polypropylene, nylon, etc. Reinforcement of both thermoset and thermoplastic resins by asbestos fibers has been practiced to develop products for the automotive, electronic, and printing industries. 

This includes inorganic materials such as mica, glass fibre and asbestos etc., impregnated or glued together with varnishes or compositions comprising ordinary organic substances for heat resistance such as oil-modified synthetic resins, bitumen, shellac and Bakelite. 

This comprises composite materials on mica, glass fibre and asbestos bases, impregnated or glued together with silicone resins or silicone elastomer. These materials must not contain any organic fibrous materials such as paper or cloth backing, which is covered under class B and even F insulation systems. 

Soon after World War II the hard thermoplastic floor tile was developed. These tiles use coumarone resins as a binder for the other ingredients, which may contain fibrous fillers such as asbestos, inert fillers such as china clay and softeners such as paraffin wax. 

In 1968 the Monsanto Company announced the availability of novel soluble low molecular weight polyphenylene resins. These may be used to impregnate asbestos or carbon fibre and then cross-linked to produce heat-resistant laminates. The basic patent (BP 1037111) indicates that these resins are prepared by heating aromatic sulphonyl halides (e.g. benzene-1,3-disulphonyl dichloride) with aromatic compounds having replaceable nuclear hydrogen (e.g. bisphenoxy-benzenes, sexiphenyl and diphenyl ether). Copper halides are effective catalysts. The molecular weight is limited initially by a deficiency in one component. This is added later with further catalyst to cure the polymer. 

Asbestos may be used for improved heat and chemical resistance and silica, mica and china clay for low water absorption grades. Iron-free mica powder is particularly useful where the best possible electrical insulation characteristics are required but because of the poor adhesion of resin to the mica it is usually used in conjunction with a fibrous material such as asbestos. Organic fillers are commonly used in a weight ratio of 1 1 with the resin and mineral fillers in the ratio 1.5 1. 

There are now commercially available a large range of laminated plastics materials. Resins used include the phenolics, the aminoplastics, polyesters, epoxies, silicones and the furane resins, whilst reinforcements may be of paper, cotton fibre, other organic fibres, asbestos, carbon fibre or glass fibre. Of these the phenolics were the first to achieve commercial significance and they are still of considerable importance. 

Fillers are used in tooling and casting application. Not only do they reduce cost but in diluting the resin content they also reduce curing shrinkage, lower the coefficient of expansion, reduce exotherms and may increase thermal conductivity. Sand is frequently used in inner cores whereas metal powders and metal oxide fillers are used in surface layers. Wire wool and asbestos are sometimes used to improve impact strength. 

Liquid resins are usually reinforced with fibers (glass, asbestos), because of their brittleness. They are almost always used for process plant construction. As liquid resins they can be catalyzed to cure at room temperature and low pressures. Relatively cheap wooden molds are required to build quite large items such as tanks and ducting on a one-off basis. The principal materials in this group of plastics are described below. 

Plienoplasts manufactured on tlie basis of thermoreactive plienolfornialde-hyde resin, liarden on licaling up to 120-170°C and tlien become insoluble. Tlicy are usually reinforced with asbestos fiber. 

Many additives are used with phenolic resins such as wood flour, oils, asbestos, and fiberglass. Fiberglass piping made with phenolic resins can operate at 150°C and pressure up to 150 psi. ... 

Compression and injection molding are used with amino resins to produce articles such as radio cabinets, buttons, and cover plates. Because melamine resins have lower water absorption and better chemical and heat resistance than urea resins, they are used to produce dinnerware and laminates used to cover furniture. Almost ah molded objects use fillers such as cellulose, asbestos, glass, wood flour, glass fiber and paper. The 1997 U.S. production of amino resins was 2.6 billion pounds. 

Vanes are usually asbestos or cotton cloth impregnated with a phenolic resin. Bronze or aluminum also may be... 

Phenol-formaldehyde (phenolic) plastics The chemical resistance is affected by the phenol used, cresols giving the best acid resistance whilst xylenols are often used to obtain the best alkali resistance. For chemical-resistant applications the fillers used in moulding powder and reinforcing material in laminates should be inorganic, e.g. asbestos or glass. The resins are usually dark in colour. 

This wastewater stream contains lead (Pb) salts and chlorinated hydrocarbons generated from corrosion of the anodes as well as asbestos particles generated as a result of degradation of the diaphragm with use. Wastewater is also generated from the scrubber where the chlorine is wet scrubbed and from the ion exchange resin used to purify the brine solution. These wash water often contains dilute hydrochloric acid with small amounts of dissolved calcium magnesium and aluminum chloride. Like in other cells, the scrubber water also contributes to the wastewater stream. 

Paper laminates, TiCh pigments in, 25 28 Papermaking, 11 179, 287-288. See also Paper manufacture additives in, 15 98 amino resin applications, 2 644-648 asbestos applications, 3 311 calcium carbonate applications, 4 554-555... 

---