Silylations aryl halides

An Q-arylalkanoate is prepared by the reaction of aryl halide or triflate with the ketene silyl acetal 74 as an alkene component. However, the reaction is explained by transmetallation of Ph - Pd—Br with 74 to generate the Pd eno-late 75, which gives the a-arylalkanoate by reductive elimination[76]. 

A number of approaches have been tried for modified halo-de-diazoniations using l-aryl-3,3-dialkyltriazenes, which form diazonium ions in an acid-catalyzed hydrolysis (see Sec. 13.4). Treatment of such triazenes with trimethylsilyl halides in acetonitrile at 60 °C resulted in the rapid evolution of nitrogen and in the formation of aryl halides (Ku and Barrio, 1981) without an electron transfer reagent or another catalyst. Yields with silyl bromide and with silyl iodide were 60-95%. The authors explain the reaction as shown in (Scheme 10-30). The formation of the intermediate is indicated by higher yields if electron-withdrawing substituents (X = CN, COCH3) are present. In the opinion of the present author, it is likely that the dissociation of this intermediate is not a concerted reaction, but that the dissociation of the A-aryl bond to form an aryl cation is followed by the addition of the halide. The reaction is therefore mechanistically not related to the homolytic halo-de-diazoniations. 

The first palladium-catalyzed formation of aryl alkyl ethers in an intermolecular fashion occurred between activated aryl halides and alkoxides (Equation (28)), and the first formation of vinyl ethers occurred between activated vinyl halides and tin alkoxides (Equation (29)). Reactions of activated chloro- and bromoarenes with NaO-Z-Bu to form /-butyl aryl ethers occurred in the presence of palladium and DPPF as catalyst,107 while reactions of activated aryl halides with alcohols that could undergo /3-hydrogen elimination occurred in the presence of palladium and BINAP as catalyst.110 Reactions of NaO-/-Bu with unactivated aryl halides gave only modest yields of ether when catalyzed by aromatic bisphosphines.110 Similar chemistry occurred in the presence of nickel catalysts. In fact, nickel catalysts produced higher yields of silyl aryl ethers than palladium catalysts.108 The formation of diaryl ethers from activated aryl halides in the presence of palladium catalysts bearing DPPF or a CF3-subsituted DPPF was also reported 109... 

A more recent publication by Weigand and Pelka has disclosed a polymer-bound Buchwald-Hartwig amination [40], Activated, electron-deficient aryl halides were coupled with conventional PS Rink resin under microwave irradiation. Subsequent acidic cleavage afforded the desired aryl amines in moderate to good yields (Scheme 7.22). Commercially available Fmoc-protected Rink amide resin was suspended in 20% piperidine/N,N-dimethylformamide at room temperature for 30 min to achieve deprotection. After washing and drying, the resin was placed in a silylated microwave vessel and suspended in dimethoxyethane (DME)/tert-butanol... 

Further, a large number of examples with simple alkyl substituents [168, 171, 176-184], cyclic alkanes [185], aryl substituents [177, 186-192], olefmic substituents [78, 177, 193-196], deuterated compounds [172], thioether groups [171], ester groups [197], orthoesters [198, 199], acetals [168, 182, 200-204], silyl-protected alcohols [198, 205-211], aldehydes [212], different heterocycles [213-217], alkyl halides [218, 219] and aryl halides [192, 220-223] have been reported. A representative example is the reaction of 92, possessing a free hydroxyl group, an acetal and a propargylic ether, to 93 [224] (Scheme 1.40). 

Very few transition-metal catalyzed electroreductive carbon-heteroatom bond formations have been described. The electrochemical silylation of allylic acetates was carried out in the presence of Pd-PPha [131]. The electrosynthesis of arylthioethers from thiophenol and aryl halides [132] and the coupling of bromobenzene with dichlorophenylphosphine [133] were performed with Ni-bpy as catalyst. 

An interesting arylation of the silyl enolate of Ley s dioxanone 133 in the presence of a catalytic amount of Pd2(dba)3 (5 mol%) and P(/-Bu)3 (10 mol%) with 0.5 equiv of Znp2 or Zn(0-/-Bu)2 provides a single diastereoisomer of the coupled products 134 (dba = dibenz[ , ]anthracene). A variety of electronically and sterically distinct aryl halides, including those containing electrophilic functional groups, have been introduced (Equation 20) <2004JA5182>. 

Stephen L. Buchwald at MIT has reported (Org. Lett. 2004, 6, 4809) a complementary approach. Enantioselective conjugate reduction of the inexpensive 3-methylcyclopentenone 4 led to the silyl enol ether 5, Pd-mediated coupling of which with the aryl halide gave the product 6. 3-Methylcyclohexenone gave the analogous product in 84% . 

Our success in synthesizing silyl ketals containing an aryl halide with (+)-ethyl lactate led us to explore the intramolecular radical translocation reaction (Scheme 29). The term radical translocation is described by Robertson et al. as the intramolecular abstraction of an atom (usually hydrogen) or group by a radical center this results in a repositioning of the site of the unpaired electron which can lead to functionalization at positions normally unreactive towards external reagents or whose selective modification is difficult In the most common cases the abstraction occurs at a site that is five atoms away from the radical 1,6 atom abstraction are less common, and l,n-abstractions where n > 6 are rare. This is because the shortest chain length that can accommodate the trajectory for atom abstraction contains six atoms, as in the case of the 1,5 atom abstraction. Entropic factors usually result in the failure of the process in the cases where n > 6 atoms. 

Silyl enolates undergo Pd-catalyzed arylation with aryl halides in the presence of an additive such as Bu3SnF,327 CuF2,328 or ZnF2.329 The arylation of silyl enolates has higher functional group tolerance than that of alkali metal enolates. The ZnF2-promoted arylation is valuable for efficient, stereoselective synthesis of a-arylated esters and imides (Equation (89)). 

When Me3SiSnBu3 is treated with CsF, the fluoride anion should coordinate to the silyl group and not the stannyl group to produce a hypervalent silicate, and as a result, a stannyl anion would be generated.282 The stannyl anion reacts with vinyl iodide to produce a vinyl anion via a halogen-metal exchange and it reacts with the carbonyl group intramolecularly (Equation (113)). Aryl halides or allyl halides are also used in similar cyclizations.283,284... 

The cross-coupling reaction of alkenyl(fluoro)silanes with aryl halides sometimes produces, in addition to the desired ipso-cowpled products, small amounts of cmc-coupled products [14]. The czne-coupling is often striking in the reaction with organotin compounds. The isomer ratio of products produced by the reaction of l-fluoro(dimethyl)silyl-l-phenylethene with aryl iodides is found to depend on the electronic nature of a substituent on aryl iodides (Eq. 11) an electron-withdrawing group like trifluoromethyl and acetyl favors the formation of the ipso-coupled product. To explain the substituent effect, the mechanism depicted in Scheme 3 is proposed for the transmetalation of alkenylsilanes with palladium(ll) complexes. It is considered that an electron-donating substituent on Ar enhances... 

Among common carbon-carbon bond formation reactions involving carbanionic species, the nucleophilic substitution of alkyl halides with active methylene compounds in the presence of a base, e. g., malonic and acetoacetic ester syntheses, is one of the most well documented important methods in organic synthesis. Ketone enolates and protected ones such as vinyl silyl ethers are also versatile nucleophiles for the reaction with various electrophiles including alkyl halides. On the other hand, for the reaction of aryl halides with such nucleophiles to proceed, photostimulation or addition of transition metal catalysts or promoters is usually required, unless the halides are activated by strong electron-withdrawing substituents [7]. Of the metal species, palladium has proved to be especially useful, while copper may also be used in some reactions [81. Thus, aryl halides can react with a variety of substrates having acidic C-H bonds under palladium catalysis. 

In the last years several publications appeared describing palladium-catalyzed a-arylations of ketone enolates for the synthesis of a-aryl ketones, involving ketone eno-lates, silyl enol ethers and intramolecular a-aiylation of ketone enolates . In this process, an enolate is generated from a ketone in the presence of an aryl halide, and a palladium catalyst couples this enolate with the aryl halide. Iwama and Rawal proposed... 

To facilitate the coupling reaction of alkenylsilanes, benzenediazonium salts could be employed in place of aryl halides [4], However, the coupling reaction is sometimes accompanied by the formation of regioisomers [Eq.(4)J. This fact is ascribed to a mechanism that involves carbopalladation of an arylpalladium complex to alkenylsilanes followed by elimination of the silyl group and the palladium metal, as is the case in Heck-type reactions. 

Some examples of electrosyntheses based on the reduction of monohalobenzenes are now cited. Reduction of iodobenzene and bromobenzene at mercury in carbon dioxide-saturated DMF containing TEAP affords benzoic acid in up to 40% yield [178]. Bromobenzene, 3-methoxybromobenzene, 4-bromofluorobenzene, 4-(trifluoromethyl)-chlorobenzene, and 1,2,4-trichlorobenzene can be converted into aldehydes at a cadmium-coated stainless-steel cathode in DMF containing TBABr [179]. In the presence of trimethylchlorosilane, silylation products arise from the reduction of various aryl halides at platinum in DMF containing TEAOTs [100]. Reduction of p-iodoanisole at... 

Triphenylsilylamine has been used as a protected ammonia equivalent for displacement of aryl halides to prepare anilines. For a more thorough discussion of silylat-ing reagents the section on alcohol protection should be consulted since many of the reagents described there will also silylate amines. 

Borabicyclo[3.3.1]nonane (9-BBN) has found use in the selective hydro-boration of alkenes in the presence of other reducible functional groups and its reaction with alkynylstannates has been studied. o-Stannyl- and a-silyl-substituted crotyl-9-BBN show promise as reagents for the stereo-regulated synthesis of acyclic systems. A series of papers covers the question of olefin-alkyl exchange in. 5-alkyl-9-BBN s, " the kinetics of reduction of substituted benzaldehydes with 9-BBN, and the kinetics and mechanism of hydroboration of alkynes with 9-BBN dimers. Selective dehalogenation of tertiary alkyl, benzyl, and allyl halides in the presence of secondary or primary alkyl or aryl halides is possible with (165). The... 

The arylamines are generally formed in good yields (Table 1). Dehalogenation products are the only by-products observed, which pro-baly arise from base-induced )9-hydride elimination of the amido arylpalladium complex and subsequent reduction. Interestingly, the base employed has a decisive influence on the course of the reaction. In the amination of l-bromo-4-n-butylbenzene with free amines in the presence of silyl amides as base -in contrast to the coupling with tin amides -the rate-determining step in the catalytic cycle is the oxidative addition of bis(tri-o-tolylphosphine)palladium(O) to the aryl halide. However, when LiOrBu is used as base, the formation and reductive elimination of the amido arylpalladium complex is decisive for the rate of the reaction. In the presence of NaOtBu both reaction steps seem to take place at similar rates. [9]... 

---