Anion exchangers selectivity

Nogueira, R., Lubda, D., Leitner, A., Bicker, W, Maier, N.M., Lammerhofer, M., and Lindner, W, Silica-based monohthic columns with mixed-mode reversed-phase/weak anion-exchange selectivity principle for high-performance liquid chromatography, J. Sep. ScL, 29, 966, 2006. 

Okada, T. (1997) Nonaqueous Anion-exchange Chromatography II. Changing Anion-exchange Selectivity by Resin Surface Complex Formation of Crown Ethers, J. Chromatogr. A 758, 29-35. 

R. W. Slingsl and C A. PohU Anion-exchange selectivity in latex-based columns for ion chromatography, / romatogr., 458,241.1988. 

A dramatic impact on chemical properties is achieved by the appropriate choice of counterion. The counterion employed during synthesis can have a marked effect on the anion-exchange selectivity series of conducting polymers.54 Table 3.4 shows the anion-exchange selectivity series obtained for both polypyrrole chloride and polypyrrole perchlorate. As illustrated, polypyrrole salts do not behave similar to conventional ion-exchange resins. 

Anion exchanger Selective O-deacylation of carbohydrate derivs. 

Another example of vims clearance is for IgM human antibodies derived from human B lymphocyte cell lines where the steps are precipitation, size exclusion using nucleases, and anion-exchange chromatography (24). A second sequence consists of cation-exchange, hydroxylapatite, and immunoaffinity chromatographies. Each three-step sequence utilizes steps based on different properties. The first sequence employs solubiUty, size, and anion selectivity the second sequence is based on cation selectivity, adsorption, and selective recognition based on an anti-u chain IgG (24). 

Anionic extractants are commonly based on high molecular weight amines. Metal anions such as MnO or ReO can be exchanged selectively with inorganic anions such as Cl or The equiHbrium for a quaternary onium compound of organic radicals R for two anion species A and B ... 

Thisis commonly referred to as a salt splitting reaction. The resin s selectivity for Na" is greater than it is for H". Anions are removed in a similar manner with an anion-exchange resin. 

Boron Removal. Boron [7440-42-8] is occasionaHy present in water suppHes at an unacceptable level. It cannot be removed with the standard anion-exchange resins unless the water is deionized. Selective removal is possible by using an anion exchanger functionalized with /V-methy1g1ucamine [6284-40-8]. This resin is in limited commercial supply. The borate form of conventional strong base anion exchangers is used in some nuclear reactors to adjust the concentration of boron in water used as a moderator. The resin releases boron as the water temperature rises. 

Uranium ores are leached with dilute sulfuric acid or an alkaline carbonate [3812-32-6] solution. Hexavalent uranium forms anionic complexes, such as uranyl sulfate [56959-61-6], U02(S0 3, which are more selectively adsorbed by strong base anion exchangers than are other anions in the leach Hquors. Sulfate complexes are eluted with an acidified NaCl or ammonium nitrate [6484-52-2], NH NO, solution. Carbonate complexes are eluted with a neutral brine solution. Uranium is precipitated from the eluent and shipped to other locations for enrichment. Columnar recovery systems were popular in South Africa and Canada. Continuous resin-in-pulp (RIP) systems gained popularity in the United States since they eliminated a difficult and cosdy ore particle/leach hquor separation step. 

In the three-step process acetone first undergoes a Uquid-phase alkah-cataly2ed condensation to form diacetone alcohol. Many alkaU metal oxides, metal hydroxides (eg, sodium, barium, potassium, magnesium, and lanthanium), and anion-exchange resins are described in the Uterature as suitable catalysts. The selectivity to diacetone alcohol is typicaUy 90—95 wt % (64). In the second step diacetone alcohol is dehydrated to mesityl oxide over an acid catalyst such as phosphoric or sulfuric acid. The reaction takes place at 95—130°C and selectivity to mesityl oxide is 80—85 wt % (64). A one-step conversion of acetone to mesityl oxide is also possible. 

Ion Excha.nge, The recovery of uranium from leach solutions using ion exchange is a very important process (42). The uranium(VI) is selectively adsorbed to an anion-exchange resin as either the anionic sulfato or carbonato complexes. In carbonate solutions, the uranyl species is thought to be the tris carbonato complex, U02(C03) 3 [24646-13-7] and from sulfate solutions the anion is likely to be U02(S0 , where nis ) [56959-61-6] or 2 [27190-85-8], The uranium is eluted from the resin with a salt or acid solution of 1 AfMCl or MNO (M = H", Na", The sulfate solution is... 

Hplc techniques are used to routinely separate and quantify less volatile compounds. The hplc columns used to affect this separation are selected based on the constituents of interest. They are typically reverse phase or anion exchange in nature. The constituents routinely assayed in this type of analysis are those high in molecular weight or low in volatility. Specific compounds of interest include wood sugars, vanillin, and tannin complexes. The most common types of hplc detectors employed in the analysis of distilled spirits are the refractive index detector and the ultraviolet detector. Additionally, the recent introduction of the photodiode array detector is making a significant impact in the analysis of distilled spirits. 

---