Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amine high molecular weight

Soaps of heavy metals have been used but cationic surface-active agents have proved more suitable, notably organic amines of relatively high molecular weight. [Pg.16]

Bio-Rex 70 2.4 0.70 Weakly acidic cation exchanger with car-boxylate groups on a macroreticular acrylic matrix for separation and fractionation of proteins, peptides, enzymes, and amines, particularly high molecular weight solutes. Does not denature proteins as do styrene-based resins. [Pg.1111]

Anionic extractants are commonly based on high molecular weight amines. Metal anions such as MnO or ReO can be exchanged selectively with inorganic anions such as Cl or The equiHbrium for a quaternary onium compound of organic radicals R for two anion species A and B ... [Pg.62]

Finally, when polyamides containing four or five carbon diacids, ie, succinic acid [110-15-6] and glutaric acid [110-94-1], respectively, are heated, they form cychc imides that cap the amine ends and prevent high molecular weights from being achieved (84). For nylon-x,4, n = 1 and for nylon-x,5, n = 2. [Pg.227]

The majority of polyetherimides are tractable and their polymerization can be performed in solution or in the melt. High molecular weight polyetherimides have been synthesized via one-step imide—amine exchange reaction between bis(etherimide)s and diamine (67) according to the following ... [Pg.403]

This scheme eliminates the process of converting bis(etherimide)s to bis(ether anhydride)s. When polyetherimides are fusible the polymerization is performed in the melt, allowing the monamine to distill off. It is advantageous if the amino groups of diamines are more basic or nucleophilic than the by-product monoamine. Bisimides derived from heteroaromatic amines such as 2-arninopyridine are readily exchanged by common aromatic diamines (68,69). High molecular weight polyetherimides have been synthesized from various N,lSf -bis(heteroaryl)bis(etherimide)s. [Pg.403]

MDA reacts similarly to other aromatic amines under the proper conditions. For example, nitration, bromination, acetylation, and dia2oti2ation (1 3) all give the expected products. Much of the chemistry carried out on MDA takes advantage of the diftmctionality of the molecule in reacting with multiftmctional substrates to produce low and high molecular weight polymers. [Pg.248]

Other Accelerators. Amine isophthalate and thiazolidine thione, which are used as alternatives to thioureas for cross-linking polychloroprene (Neoprene) and other chlorine-containing polymers, are also used as accelerators. A few free amines are used as accelerators of sulfur vulcanization these have high molecular weight to minimize volatility and workplace exposure. Several amines and amine salts are used to speed up the dimercapto thiadiazole cure of chlorinated polyethylene and polyacrylates. Phosphonium salts are used as accelerators for the bisphenol cure of fluorocarbon mbbers. [Pg.223]

Uretha.nes. Urethane elastomers are prepared by the reaction of an isocyanate molecule with a high molecular weight ester or ether molecule. The result is either an elastomeric mbber form or a Hquid prepolymer that can be vulcanised with an amine or a hydroxyl molecule (see Urethane POLYAffiRS). [Pg.234]

There is an industry trend to supply SBR certifiably free of volatile nitrosamines or nitrosatable compounds. This has generally been accomplished by replacing shortstop systems based on carbamates and hydroxyl amines with products that are not based on secondary amines or are secondary amines of high molecular weight, such as dibenzyldithiocarbamate. A more recendy issued patent for ESBR shortstop is based on isopropyUiydroxylamine, a primary amine that does not form nitrosamine (46). [Pg.501]

High molecular weight primary, secondary, and tertiary amines can be employed as extractants for zirconium and hafnium in hydrochloric acid (49—51). With similar aqueous-phase conditions, the selectivity is in the order tertiary > secondary > primary amines. The addition of small amounts of nitric acid increases the separation of zirconium and hafnium but decreases the zirconium yield. Good extraction of zirconium and hafnium from ca 1 Af sulfuric acid has been effected with tertiary amines (52—54), with separation factors of 10 or more. A system of this type, using trioctylarnine in kerosene as the organic solvent, is used by Nippon Mining of Japan in the production of zirconium (55). [Pg.430]

In contrast, tertiary amines do not possess a proton to transfer, and the reaction of the Michael-type addition adduct with ECA can only initiate polymerization to form high molecular weight adhesive polymer, as shown earlier in Scheme 1. [Pg.863]

This difference in reactivity between the different classes of amines explains the difference in the primer performance on polyolefin substrates with ethyl cyanoacrylate-based adhesives [37J. Since primary and secondary amines form low molecular weight species, a weak boundary layer would form first, instead of high molecular weight polymer. Also, the polymer, which does ultimately form, has a lower molecular weight, which would lower adhesives strength [8,9]. [Pg.863]

Polybutadienes, polycaprolactones, polycarbonates, and amine-terminated polyethers (ATPEs) are shown in Scheme 4.4 as examples of other commercially available polyols. They are all specialty materials, used in situations where specific property profiles are required. For example, ATPEs are utilized in spray-applied elastomers where fast-reacting, high-molecular-weight polyamines give quick gel times and rapid viscosity buildup. Polycarbonates are used for implantation devices because polyuredtanes based on them perform best in this very demanding environment. Polycaprolactones and polybutadienes may be chosen for applications which require exceptional light stability, hydrolysis resistance, and/or low-temperature flexibility. [Pg.213]

Amine-terminated siloxane oligomers have also been utilized in the synthesis of various siloxane-amide and siloxane-imide copolymers, High molecular weight siloxane-amide copolymers have been synthesized by the solution or interfacial co-polymerization of siloxane oligomers with sebacoyl chloride or terephthaloyl chloride respectively 1S5,165). In some reactions diamine chain extenders have also been utilized. Thermal and dynamic mechanical characterization of these copolymers have shown the formation of multiphase systems160). Compression molded films displayed very good elastomeric properties. [Pg.33]

This reaction is restricted to ethylene and to secondary amines of high basicity (nude-ophUicity) and low steric bulk (Me2NH, pyrrolidine, piperidine). No high molecular weight products are formed. However, the same catalysts [107,108] as well as PdQj [108] also exhibit some activity for the hydroamination of ethylene with PhNH2 (Eq. 4.9). [Pg.97]

In all the above reactions, secondary amines give good yields of butenyl compounds, whereas with primary amines products of high molecular weight, i.e. containing more than 2 butadiene units per mol of amine, are also formed. The latter have been shown to be aldimine derivatives containing three C4 units [203]. [Pg.114]

Many compositions involve environmentally dangerous products, such as chromates, fatty amines of high molecular weights, imidazolines, etc. The use of some of the alternatives, for instance, polyphosphate or polyphosphonate, is limited because they precipitate in the presence of the salts of alkaline earth metals or because of their high costs. [Pg.83]

Perfluoroalkyl)ethane thiols have been used as precursors to fluorinated surfactants and products for hydro- and oligophobic finishing of substrates such as textiles and leather (1). The synthesis of 2-(perfluoroalkyl)ethane thiol and a byproduct bis-(-2-perfluoroalkylethane)-disulfide (5-10%) has been practiced via the reaction of 2-(perfluoroalkyl)ethane iodide with thiourea to form an isothiuronium salt which is cleaved with alkali or high molecular weight amine as shown in Equation 1 for 2-(perfluorohexyl)ethane iodide (1). [Pg.135]


See other pages where Amine high molecular weight is mentioned: [Pg.87]    [Pg.87]    [Pg.154]    [Pg.278]    [Pg.304]    [Pg.314]    [Pg.274]    [Pg.64]    [Pg.242]    [Pg.235]    [Pg.328]    [Pg.361]    [Pg.399]    [Pg.400]    [Pg.403]    [Pg.254]    [Pg.366]    [Pg.32]    [Pg.752]    [Pg.535]    [Pg.188]    [Pg.204]    [Pg.171]    [Pg.164]    [Pg.185]    [Pg.216]    [Pg.364]    [Pg.495]    [Pg.73]    [Pg.4]    [Pg.257]    [Pg.135]    [Pg.4]   
See also in sourсe #XX -- [ Pg.171 ]




SEARCH



Weight amine

© 2024 chempedia.info