Aluminum, elemental reactions with

Reactions with Elements and Inorganic Compounds. Aluminum reacts with oxygen [7782-44-7] having a heat of reaction of... 

Sihca is reduced to siUcon at 1300—1400°C by hydrogen, carbon, and a variety of metallic elements. Gaseous siUcon monoxide is also formed. At pressures of >40 MPa (400 atm), in the presence of aluminum and aluminum haUdes, siUca can be converted to silane in high yields by reaction with hydrogen (15). SiUcon itself is not hydrogenated under these conditions. The formation of siUcon by reduction of siUca with carbon is important in the technical preparation of the element and its alloys and in the preparation of siUcon carbide in the electric furnace. Reduction with lithium and sodium occurs at 200—250°C, with the formation of metal oxide and siUcate. At 800—900°C, siUca is reduced by calcium, magnesium, and aluminum. Other metals reported to reduce siUca to the element include manganese, iron, niobium, uranium, lanthanum, cerium, and neodymium (16). 

Metallic Antimonides. Numerous binary compounds of antimony with metallic elements are known. The most important of these are indium antimonide [1312-41 -0] InSb, gallium antimonide [12064-03-8] GaSb, and aluminum antimonide [25152-52-7] AlSb, which find extensive use as semiconductors. The alkali metal antimonides, such as lithium antimonide [12057-30-6] and sodium antimonide [12058-86-5] do not consist of simple ions. Rather, there is appreciable covalent bonding between the alkali metal and the Sb as well as between pairs of Na atoms. These compounds are useful for the preparation of organoantimony compounds, such as trimethylstibine [594-10-5] (CH2)2Sb, by reaction with an organohalogen compound. 

The last reaction is the most favored of these three. The actual occurrence of the reactions with elemental phosphorus or phosphorous trichloride as products has been explained to be due to kinetic reasons. The thorium present in the ore volatilizes in the form of thorium tetrachloride (ThCl4) vapor other metallic impurities such as iron, chromium, aluminum, and titanium also form chlorides and vaporize. The product obtained after chlorination at 900 °C is virtually free from thorium chloride and phosphorous compounds, and also from the metals iron, aluminum, chromium, and titanium. 

In addition to the ability to react nonspecifically with hydrocarbons, active nitrogen can readily participate in energy transfer reactions with volatile organometal-lic compounds, leading to atomic emission from the metal atom. By use of appropriate optical filters, selective detection of elements such as aluminum, lead, tin, and mercury has been achieved in the presence of large excesses of organics [58],... 

Clusters of the elements aluminum to thallium containing only one or two carbon atoms and strong direct element-element interactions, similar to boron rich car-baboranes, have not yet been synthesized, and also the corresponding silicon derivatives are relatively rare. To the best of our knowledge only one aluminum-silicon and one gallium-silicon cluster (1 and 2) has been reported in the literature. The reaction of metastable aluminum(I) chloride with decamethylsilicocene or with a mixture of SiCl4 and (AlCp )4, respectively, afforded black crystals of... 

Facile routes for the convenient syntheses of similar complexes of the aluminum(II) subhalides do not exist at all. These compounds [X2(L)A1-A1(L)X2 (X = Cl, Br, I L = NMe2SiMe3, OEt2, PEt3, MeOPh)] were obtained in low yields by the treatment of metastable solutions of aluminum monohalides A1X with the corresponding donor substances similar to the reactions described in Eq. (3).33 35 A12C14 was supposed to be formed from elemental A1 and A1C13 at 120 °C in a solvent, however, it was not isolated in a pure form and was characterized on the basis of some not really specific reactions.36 In view of the results obtained recently with respect to the synthesis and stability of aluminum subhalides,33 35 it seems to be rather implausible that indeed considerable concentrations of a subhalide had formed. Quantum-chemical calculations... 

When a free element reacts with a compound of different elements, the free element will replace one of the elements in the compound if the free element is more reactive than the element it replaces. In general, a free metal will replace the metal in the compound, or a free nonmetal will replace the nonmetal in the compound. A new compound and a new free element are produced. As usual, the formulas of the products are written according to the rules in Chap. 5. The formula of a product does not depend on the formula of the reacting element or compound. For example, consider the reactions of sodium with iron(II) chloride and of fluorine with aluminum oxide ... 

More than one boride phase can be formed with most metals, and in many cases a continuous series of solid solutions may be formed. Several methods have been used for the relatively large-scale preparation of metal borides. One that is commonly used is carbon reduction of boric oxide and the appropriate metal oxide at temperatures up to 2000 °C. Fused salt electrolysis of borax or boric oxide and a metal oxide at 700 1000 °C have also been used. Small-scale methods available include direct reaction of the elements at temperatures above 1000 °C and the reaction of elemental boron with metal oxides at temperatures approaching 2000 °C. One commercial use of borides is in titanium boride-aluminum nitride crucibles or boats for evaporation of aluminum by resistance heating in the aluminizing process, and for rare earth hexaborides as electronic cathodes. Borides have also been used in sliding electrical contacts and as cathodes in HaU cells for aluminum processing. 

Other specialized alloys have also been used to prepare skeletal metal catalysts. Raney ruthenium has been prepared from the ruthenium aluminum alloy. 20 A colloidal platinum has been prepared by the action of acetic acid on a platinum lithium alloy. l Skeletal nickel catalysts have been made from a number of intermetallic compounds of nickel with the rare earth elements, lanthanum and samarium. The rare earth element is removed from the alloy by reaction with diiodoethane or dibromoethane which convert the rare earths to the soluble halide salts. 22 Several multicomponent catalysts have also been prepared from the corresponding aluminum alloys. 23-126... 

---