Alkylation with sulfides

The highly regio- and diastereoselective addition of an alkyl and an arylthio group to an olefinic double bond ( carbosulfenylation ) is achieved with arenesulfenyl chlorides and alkyl-chloro-titanium(IV) species (Reetz reagent, from R2Zn/TiCU 5 1 M. T. Reetz, 1987, 1989), Use of the more bulky 2,4,6-triisopropylbenzenesulfenyl chloride improves the yield of the highly versatile alkyl aryl sulfide products. 

Uses. There may be some captive use of carbonyl sulfide for production of certain thiocarbamate herbicides (qv). One patent (38) describes the reaction of diethylamine with carbonyl sulfide to form a thiocarbamate salt which is then alkylated with 4-chloroben2yl haUde to produce 3 -(4-chloroben2yl) A[,A/-diethylthiocarbamate [28249-77-6] ie, benthiocarb [28249-77-6]. Carbonyl sulfide is also reported to be useful for the preparation of abphatic polyureas. In these preparations, potassium thiocyanate and sulfuric acid are used to first generate carbonyl sulfide, COS, which then reacts with a diamine ... 

Another way to prepare fluorinated sulfides is the photochemical alkylation of sulfides or disulfides by perfluoroalkyl iodides [69, 70, 71] (equations 62-64). Reaction of trifluoromethyl bromide with alkyl or aryl disulfides in the presence of a sulfur dioxide radical anion precursor, such as sodium hydroxymethanesulfi-nate, affords trifluoromethyl sulfides [72] (equation 65). 

Perfluoroalkylcopper reagents react with thiocyanates to give perfluoro-alkyl-substituted sulfides in low yields [230] and with benzoylformyl chloride to give the oi-diketone in 49% yield [231] However, other a-ketoacyl halides were prepared in less than 5% yield [231]... 

In a similar vein, the amino group in sulfide 14 (obtained presumably by an aromatic displacement reaction) is first converted to the bromide by Sandmeyer reaction to give 25. Reduction of the nitro group (16) followed by cyclization gives the substituted phenothiazine. Alkylation with the familiar halide (3) affords dimethothiazine (18). ... 

Thiols, the sulfur analogs of alcohols, are usually prepared by Sjv 2 reaction of an alkyl halide with thiourea. Mild oxidation of a thiol yields a disulfide, and mild reduction of a disulfide gives back the thiol. Sulfides, the sulfur analogs of ethers, are prepared by an Sk2 reaction between a thiolate anion and a primary or secondary alkyl halide. Sulfides are much more nucleophilic than ethers and can be oxidized to sulfoxides and to sulfones. Sulfides can also be alkylated by reaction with a primary alkyl halide to yield sulfonium ions. 

Several chlorophyll derivatives have been prepared by electrophilic substitution, inter alia by formylation reactions. Adopting methods from corrin chemistry.50 alkylation with chloro-methyl methyl ether (caution toxic),32k chloromethyl methyl sulfide,51 and dichloromethyl methyl ether (caution toxic)52 in the presence of Lewis acids are the methods of choice to introduce carbon residues into the chlorin frame work. The compounds listed below have been prepared by these methods. 

Oae and coworkers oxidized several diaryl, dialkyl and alkyl aryl sulfides to their corresponding sulfoxides using purified cytochrome P-450 obtained from rabbit liver microsomes138. In agreement with expectations, this enzyme did not exhibit much stereospecificity. Some examples including the observed e.e. values are shown by 121-125. A model was proposed to account for the absolute configurations of the sulfoxides produced (126). The sulfur atom is preferentially oxidized from the direction indicated. 

Several alkyl aryl sulfides were electrochemically oxidized into the corresponding chiral sulfoxides using poly(amino acid)-coated electrodes448. Although the levels of enan-tioselection were quite variable, the best result involved t-butyl phenyl sulfoxide which was formed in 93% e.e. on a platinum electrode doubly coated with polypyrrole and poly(L-valine). Cyclodextrin-mediated m-chloroperbenzoic acid oxidation of sulfides proceeds with modest enantioselectivity44b. 

This reaction is analogous to 10-16. Primary and secondary alcohols can be converted to alkyl aryl sulfides (ROH RSAr) in high yields by treatment with BU3P and an V-(arylthio)succinimide in benzene. Thioethers RSR can be prepared from an alcohol ROH and a halide R Cl by treatment with tetra-methylthiourea Me2NC(=S)NMe2 followed by NaH. ... 

Cyanide and thiocyanate anions in aqueous solution can be determined as cyanogen bromide after reaction with bromine [686]. The thiocyanate anion can be quantitatively determined in the presence of cyanide by adding an excess of formaldehyde solution to the sample, which converts the cyanide ion to the unreactive cyanohydrin. The detection limits for the cyanide and thiocyanate anions were less than 0.01 ppm with an electron-capture detector. Iodine in acid solution reacts with acetone to form monoiodoacetone, which can be detected at high sensitivity with an electron-capture detector [687]. The reaction is specific for iodine, iodide being determined after oxidation with iodate. The nitrate anion can be determined in aqueous solution after conversion to nitrobenzene by reaction with benzene in the presence of sulfuric acid [688,689]. The detection limit for the nitrate anion was less than 0.1 ppm. The nitrite anion can be determined after oxidation to nitrate with potassium permanganate. Nitrite can be determined directly by alkylation with an alkaline solution of pentafluorobenzyl bromide [690]. The yield of derivative was about 80t.with a detection limit of 0.46 ng in 0.1 ml of aqueous sample. Pentafluorobenzyl p-toluenesulfonate has been used to derivatize carboxylate and phenolate anions and to simultaneously derivatize bromide, iodide, cyanide, thiocyanate, nitrite, nitrate and sulfide in a two-phase system using tetrapentylammonium cWoride as a phase transfer catalyst [691]. Detection limits wer Hi the ppm range. 

Daco-derived ligands, in particular derivatives alkylated with ethylene sulfide to provide pendent mercaptoethyl groups, have been used in model compounds for the active site of Ni11-containing hydrogenases.1407 1409... 

Several palladium catalysts for formation of aryl sulfides from aryl halides have been investigated more recently. A combination of Pd2(dba)3 and DPEphos catalyzed the formation of a broad range of diaryl sulfides in the presence of 1 mol.% palladium and NaO-t-Bu base in toluene solvent.12,rThe highest yields of alkyl aryl sulfides were obtained from aryl triflates and n-butyl thiol catalyzed by a combination of palladium acetate and BINAP. However, these reactions contained 10 mol.% catalyst, were long, and required deactivated aryl triflates. A combination of Pd2(dba)3 and DPPF catalyzed the coupling of thiols with resin-bound aryl halides.121... 

The second cycloaddition substrate took to form of 91 (Scheme 1.9b), incorporating a vinyl sulfone dipolarophile. Beginning with cyano ketone 84, which was readily prepared from 1,5-dicyanopentane via a previously reported three-step sequence [45], condensation with thiophenol produced vinyl sulfide 85 in 84 % yield. Vinyl sulfide 85 underwent bromination in acetonitrile to afford bromo-vinyl sulfide 86 (86 %), which was then treated with isopropylmagnesium chloride [46] to effect metal-halogen exchange affording an intermediate vinyl magnesium bromide species. Subsequent alkylation with Mel in the presence of catalytic CuCN provided the alkylated vinyl sulfide 87 in 93 % yield. The nitrile within vinyl... 

It is considered that the stannyl or silyl radical and the alkyl radical are reactive intermediates in these reactions. In contrast to the selective formation of the arylchalcogenosilanes in the above radical reactions, the cross-coupling reaction of a hydrosilane with alkyl(aryl)sulfides catalyzed by palladium nanoparticles results in the selective formation of the corresponding alkylthiosilanes.42... 

Similar to nitrogen compounds, electron-rich sulfur compounds, such as the sulfides, with the lone pair of electrons on the sulfur atom, are oxidized to sulfoxides and, further, to sulfones by the H202/titanosilicate sytem (218,232, 233). Table XXXI (232) illustrates typical conversions and product selectivities for various sulfides for the reactions catalyzed by TS-1. Bulky sulfides such as alkyl, phenyl sulfides are relatively unreactive because of their steric exclusion from the pores of TS-1. Diphenyl sulfide could not be oxidized at all. As the diffusivity and, hence, the conversion of the sulfide decreases, the further oxidation of the primary product (sulfoxide) becomes more competitive, leading to increased formation of the corresponding sulfone (Table XXXI) ... 

---