Oxidation m-chloroperbenzoic acid

Epoxidation of aromatic hydrocarbons is an important method for the preparation of arene oxides. m-Chloroperbenzoic acid (MCPBA) is used in a two-phase system that involves treating the hydrocarbon with a large excess ( 10-fold) of MCPBA in methylene chloride-aqueous sodium bicarbonate at room temperature. The yields are moderate (10-60%). Because the arene oxides are sensitive to acids, the presence of sodium bicarbonate buffer is necessary. A number of K-region (see Section VII for a definition) epoxides like phenanthrene 9,10-oxide (1, 59%), 9,10-dimethylphenanthrene 9,10-oxide (2,40%), 9-phenylphenanthrene 9,10-epoxide (3,50%), pyrene 4,5-oxide (4, 14%), and chrysene 4,5-oxide (5,9%) have been prepared by this method.9... 

ARENE OXIDES m-Chloroperbenzoic acid. Hydrogen peroxide-Diisoptopyl-carbodiimide. Sodium hypochlorite. 

The first report of a dihydro-1,2-diazocine dioxide (431) has come from Smith ef who were able to couple the amino-groups of the diphenyl ethane (430) with the common oxidant m-chloroperbenzoic acid. Although the return was only 20%, the reaction could also be used to prepare the analogues (432) in similar yield. 

The oxidation of 2- and 5-sulfides is usually performed in acetic acid and 30% hydrogen peroxide (213, 229, 263, 345-350) Or with m-chloroperbenzoic acid (341). Ary] (8, 272. 349, 351-353) and alkyl sulfones (129, 203, 214, 270, 274, 275) are thus obtained in good yields. Other oxidative reagents such as KMn04 (7, 273) or CrO (7) in acetic add have also been used. 

Furano(3,6)pyridazinophane gives with m-chloroperbenzoic acid the corresponding chiral mono-lV-oxide (91) (80JOC4584). 

The alkylthio group is replaceable by nucleophiles. The positions 7 and 4 react under mild conditions in that order the 2-alkylthio functions require more drastic treatment. Conversion of l-methyl-4-methylthiopteridin-2-one (157) into the 4-methylamino derivative (158) can be achieved by stirring with methylamine at room temperature (equation 48). The reactivity of an alkylthio group can often be further enhanced by oxidation to the corresponding sulfoxide and sulfone. Thus, reaction of l,3-dimethyl-7-methylthiolumazine (160) with m-chloroperbenzoic acid yields 7-methylsulfinyl- (161) and 7-methylsulfonyl-l,3-dimethyllumazine (162 equation 49) (82UP21601). 4-Amino-2-methylthio-7-... 

Oxidation of fused isoxazolidine (173) with one equivalent of m-chloroperbenzoic acid produced an oxazine. The mechanism of transformation involves formation of an A/-oxide... 

The most common method of epoxidation is the reaction of olefins with per-acids. For over twenty years, perbenzoic acid and monoperphthalic acid have been the most frequently used reagents. Recently, m-chloroperbenzoic acid has proved to be an equally efficient reagent which is commercially available (Aldrich Chemicals). The general electrophilic addition mechanism of the peracid-olefin reaction is currently believed to involve either an intra-molecularly bonded spiro species (1) or a 1,3-dipolar adduct of a carbonyl oxide, cf. (2). The electrophilic addition reaction is sensitive to steric effects. 

In a typical Knof procedure, 3jS-hydroxyandrost-5-en-17-one acetate is epoxidized with perbenzoic acid (or m-chloroperbenzoic acid ) to a mixture of 5a,6a- and 5)5,6)5-epoxides (75) in 99 % yield. Subsequent oxidation with aqueous chromium trioxide in methyl ethyl ketone affords the 5a-hydroxy-6-ketone (76) in 89% yield. Baeyer-Villiger oxidation of the hydroxy ketone (76) with perbenzoic acid (or w-chloroperbenzoic acid ) gives keto acid (77) in 96% yield as a complex with benzoic acid. The benzoic acid can be removed by sublimation or, more conveniently, by treating the complex with benzoyl chloride and pyridine to give the easily isolated )5-lactone (70) in 40% yield. As described in section III-A, pyrolysis of j5-lactone (70) affords A -B-norsteroid (71). Knof used this reaction sequence to prepare 3)5-hydroxy-B-norandrost-5-en-17-one acetate, B-noran-... 

The parent indolo[2,3-fl]carbazole (1) has also been the subject of a study probing its reactivity toward oxidizing agents. One of the substrates involved, namely 85 (prepared from 1 and 2,5-dimethoxytetrahydrofuran in the presence of acid), was subjected to treatment with m-chloroperbenzoic acid, to give the dione 86 as the major product and a sensitive compound assigned the hydroxy structure 87. A cleaner reaction took place when 85 underwent oxidation with tert-butyl hydroperoxide assisted by VO(acac)2, to produce 86 exclusively in 86% yield. Likewise, A,N -dimethylindolo[2,3-fl]carbazole furnished the dione 88 on treatment with this combination of reagents (96J(X 413). 

The treatment of 1,2,4-triazines containing the camphor (168) or methylcyclo-pentane fragment (169) with m-chloroperbenzoic acid gives annelated 1,2,4-triazine 1-oxides 170 and 171, respectively (82JHC1201). 

The Baeyer-Villiger oxidation is a synthetically very useful reaction it is for example often used in the synthesis of natural products. The Corey lactone 11 is a key intermediate in the total synthesis of the physiologically active prostaglandins. It can be prepared from the lactone 10, which in turn is obtained from the bicyclic ketone 9 by reaction with m-chloroperbenzoic acid (MCPBA) " ... 

The a -halosulfone, required for the Ramberg-Backlund reaction, can for example be prepared from a sulfide by reaction with thionyl chloride (or with N-chlorosuccinimide) to give an a-chlorosulfide, followed by oxidation to the sulfone—e.g. using m-chloroperbenzoic acid. As base for the Ramberg-Backlund reaction have been used alkoxides—e.g. potassium t-butoxide in an etheral solvent, as well as aqueous alkali hydroxide. In the latter case the use of a phase-transfer catalyst may be of advantage. ... 

Based on the kinetic studies, a mechanism for this oxidation was proposed45 which involves a nucleophilic attack by the sulphide on a cyclic hydrogen-bonded form of the peracid (equation 9). Since oxidation using peracids occurs under very mild conditions, it can be successfully applied to the preparation of base sensitive sulphoxides. Thus, di(a-bromobenzyl) sulphoxide 25, which is very labile in the presence of a base, was obtained by careful oxidation of a-di(a-bromobenzyl) sulphide by means of m-chloroperbenzoic acid (MCPBA)46 (equation 10). 

All attempts to oxidize either cis- or trans-di-t-butylthiirane oxides failed122 (see equation 20). Reagents investigated included m-chloroperbenzoic acid, sodium peroxide, hydrogen peroxide, ozone and aqueous potassium permanganate. The cis oxide was resistant to oxidation (apparently steric hindrance), and the trans isomer was consumed with excess oxidizing agent but no identifiable products could be isolated. 

Several alkyl aryl sulfides were electrochemically oxidized into the corresponding chiral sulfoxides using poly(amino acid)-coated electrodes448. Although the levels of enan-tioselection were quite variable, the best result involved t-butyl phenyl sulfoxide which was formed in 93% e.e. on a platinum electrode doubly coated with polypyrrole and poly(L-valine). Cyclodextrin-mediated m-chloroperbenzoic acid oxidation of sulfides proceeds with modest enantioselectivity44b. 

---