Alkyl radical initiation

The alkyl radical initially formed reacts readily with oxygen to give the corresponding alkylperoxy radical, which may abstract hydrogen from a fuel molecule to form the alkylhydroperoxide or alternatively decompose to yield an aldehyde and an alkoxy radical. Some workers thought that this decomposition was preceded by an isomerization of the alkylperoxy radical, the activation energy of which had been estimated by Semenov [3] to be ca. 20 kcal. mole. Shtern was of the opinion that the major, if not the only, fate of the alkylperoxy radical was decomposition, but in contrast to other workers he believed that it must involve scission of a C—C bond and could not lead to the formation of a carbonyl compound and hydroxyl radical. 

The alkyl radicals initially generated will usually react exclusively with oxygen. Other reactions such as decomposition, disproportionation, isomerization, recombination and reaction with the fuel will only compete when the partial pressure of oxygen is low or the temperature high (ca. 450 °C). The nature of their reaction with oxygen, particularly in the temperature range 250—400 °C, has led to considerable experimentation and discussion. 

Other derivatives of p-quinones, such as anthraquinone, mono- and di-sodium sulphonates are photosensitizers of the oxidation of isopropanol [Refs. 84, 105, 106, 158, 662, 663]. Lock and Sagar [377] have suggested that a similar mechanism may occur in the photosensitized oxidation of JV-alkylamides which they studied as a model system simulating the photo-sensitized degradation of polyamides. They suggest that the AT-alkyl radical initially produced may add molecular oxygen to give peroxy radicals which are the precursors of the observed oxidation reaction. 

Both the benzoyl and alkyl radicals initiate the polymerisation by addition to the monomer double bond. By contrast, the ketyl radical is inactive toward vinyl double bonds, so that initiation occurs through the H-donor radical. To be efficient, a photoinitiator must effectively absorb the radiation emitted by the light source... 

Perfluoro alkenyl vinyl ethers CF2=CF(CF) OCF=CF2(/t=l- 3) have been prepared and have been shown to undergo cyclopolymerization under alkyl radicals initiation at mild temperatures to give soluble polymers [67]. 

The regioselectivity of addition of HBr to alkenes under normal (electrophilic addi tion) conditions is controlled by the tendency of a proton to add to the double bond so as to produce the more stable carbocatwn Under free radical conditions the regioselec tivity IS governed by addition of a bromine atom to give the more stable alkyl radical Free radical addition of hydrogen bromide to the double bond can also be initiated photochemically either with or without added peroxides... 

Some details of the chain-initiation step have been elucidated. With an oxygen radical-initiator such as the /-butoxyl radical, both double bond addition and hydrogen abstraction are observed. Hydrogen abstraction is observed at the ester alkyl group of methyl acrylate. Double bond addition occurs in both a head-to-head and a head-to-tail manner (80). 

The extent of decarboxylation primarily depends on temperature, pressure, and the stabihty of the incipient R- radical. The more stable the R- radical, the faster and more extensive the decarboxylation. With many diacyl peroxides, decarboxylation and oxygen—oxygen bond scission occur simultaneously in the transition state. Acyloxy radicals are known to form initially only from diacetyl peroxide and from dibenzoyl peroxides (because of the relative instabihties of the corresponding methyl and phenyl radicals formed upon decarboxylation). Diacyl peroxides derived from non-a-branched carboxyhc acids, eg, dilauroyl peroxide, may also initially form acyloxy radical pairs however, these acyloxy radicals decarboxylate very rapidly and the initiating radicals are expected to be alkyl radicals. Diacyl peroxides are also susceptible to induced decompositions ... 

Diperoxyketals. Some commercially available di(/ f2 -alkylperoxy)ketals and their corresponding 10-h half-life temperatures (deterrnined in dodecane) are hsted in Table 5 (39). Diperoxyketals thermally decompose by cleavage of only one oxygen—oxygen bond initially, usually foUowed by P-scission of the resulting alkoxy radicals (40). For acychc diperoxyketals, P-scission produces an alkyl radical and a peroxyester. 

Because high temperatures are required to decompose diaLkyl peroxides at useful rates, P-scission of the resulting alkoxy radicals is more rapid and more extensive than for most other peroxide types. When methyl radicals are produced from alkoxy radicals, the diaLkyl peroxide precursors are very good initiators for cross-linking, grafting, and degradation reactions. When higher alkyl radicals such as ethyl radicals are produced, the diaLkyl peroxides are useful in vinyl monomer polymerizations. 

A20 initiators decompose thermally by cleavage of the two carbon—nitrogen bonds, either stepwise or simultaneously, to form two alkyl radicals and a nitrogen molecule ... 

The reactions of alkyl hydroperoxides with ferrous ion (eq. 11) generate alkoxy radicals. These free-radical initiator systems are used industrially for the emulsion polymerization and copolymerization of vinyl monomers, eg, butadiene—styrene. The use of hydroperoxides in the presence of transition-metal ions to synthesize a large variety of products has been reviewed (48,51). 

The ultimate fate of the oxygen-centered radicals generated from alkyl hydroperoxides depends on the decomposition environment. In vinyl monomers, hydroperoxides can be used as efficient sources of free radicals because vinyl monomers generally are efficient radical scavengers which effectively suppress induced decomposition. When induced decomposition occurs, the hydroperoxide is decomposed with no net increase of radicals in the system (see eqs. 8, 9, and 10). Hydroperoxides usually are not effective free-radical initiators since radical-induced decompositions significantly decrease the efficiency of radical generation. Thermal decomposition-rate studies in dilute solutions show that alkyl hydroperoxides have 10-h HLTs of 133—172°C. 

Single-electron transfer from a borate anion particle to the excited polymethine cation generates a dye radical and an aLkylphenylbotanyl radical. The aLkylphenylbotanyl radical fragments to form an active alkyl radical. It is the alkyl radical particles that initiate the polymerization reactions (101). 

Initiation. Free-radical initiators are produced by several processes. The high temperatures and shearing stresses required for compounding, extmsion, and molding of polymeric materials can produce alkyl radicals by homolytic chain cleavage. Oxidatively sensitive substrates can react directly with oxygen, particularly at elevated temperatures, to yield radicals. 

The effect substitution on the phenolic ring has on activity has been the subject of several studies (11—13). Hindering the phenolic hydroxyl group with at least one bulky alkyl group ia the ortho position appears necessary for high antioxidant activity. Neatly all commercial antioxidants are hindered ia this manner. Steric hindrance decreases the ability of a phenoxyl radical to abstract a hydrogen atom from the substrate and thus produces an alkyl radical (14) capable of initiating oxidation (eq. 18). 

Many random copolymers have found commercial use as elastomers and plastics. For example, SBR (62), poly(butadiene- (9-styrene) [9003-55-8] has become the largest volume synthetic mbber. It can be prepared ia emulsion by use of free-radical initiators, such as K2S20g or Fe /ROOH (eq. 18), or in solution by use of alkyl lithium initiators. Emulsion SBR copolymers are produced under trade names by such companies as American Synthetic Rubber (ASPC), Armtek, B. F. Goodrich (Ameripool), and Goodyear (PHoflex) solution SBR is manufactured by Firestone (Stereon). The total U.S. production of SBR in 1990 was 581,000 t (63). 

The hexabutyldistannane used in this reaction is not involved in the propagation sequence but may be involved in initiation or scavenging of potential chain-termination radicals. Intermolecular additions of alkyl radicals to alkynes have also been observed. 

Alkyl cyanoacrylate monomers have been copolymerized with a variety of monomers, both by radical and anionic initiation. The radical-initiated copolymerization with acrylic monomers was performed with a sufficient amount of an acid stabilizer present to suppress polymerization by anionic means [19]. This investigation has been covered extensively elsewhere. 

It is also interesting that the yield of monomethyl succinate (R — H), which presumably arises from the abstraction of a hydrogen atom by the aeyloxy radical, is higher in the presence of aromatic than aliphatic substrates. This may mean that the aeyloxy radical is mainly responsible for the abstraction of a hydrogen atom from the initial adduct (26) formed between the alkyl radical and the aromatic substrate (cf. Section II,B). 

The reaction is likely to proceed by a radical-chain mechanism, involving intermediate formation of carboxyl radicals, as in the related Kolbe electrolytic synthesis. Initially the bromine reacts with the silver carboxylate 1 to give an acyl hypobromite species 3 together with insoluble silver bromide, which precipitates from the reaction mixture. The unstable acyl hypobromite decomposes by homolytic cleavage of the O-Br bond, to give a bromo radical and the carboxyl radical 4. The latter decomposes further to carbon dioxide and the alkyl radical 5, which subsequently reacts with hypobromite 3 to yield the alkyl bromide 2 and the new carboxyl radical 4Z... 

The anodic oxidation of the carboxylate anion 1 of a carboxylate salt to yield an alkane 3 is known as the Kolbe electrolytic synthesis By decarboxylation alkyl radicals 2 are formed, which subsequently can dimerize to an alkane. The initial step is the transfer of an electron from the carboxylate anion 1 to the anode. The carboxyl radical species 4 thus formed decomposes by loss of carbon dioxide. The resulting alkyl radical 2 dimerizes to give the alkane 3 " ... 

The free radical initiators are more suitable for the monomers having electron-withdrawing substituents directed to the ethylene nucleus. The monomers having electron-supplying groups can be polymerized better with the ionic initiators. The water solubility of the monomer is another important consideration. Highly water-soluble (relatively polar) monomers are not suitable for the emulsion polymerization process since most of the monomer polymerizes within the continuous medium, The detailed emulsion polymerization procedures for various monomers, including styrene [59-64], butadiene [61,63,64], vinyl acetate [62,64], vinyl chloride [62,64,65], alkyl acrylates [61-63,65], alkyl methacrylates [62,64], chloroprene [63], and isoprene [61,63] are available in the literature. 

Replacing the H-atoms by alkyl radicals, that is, replacing / by the generating series r(x) of the alkyl radicals (as in Sec. 58) and representing the m C-atoms of the initial compound by the factor X , we get the generating function of the special disubstituted paraffins discussed here, namely... 

The term primary radical used in this context should be distinguished from that used when describing the substitution pattern of alkyl radicals, t For example, in PS the initiator-derived end groups will account for ca 0.2% of units in a sample of molecular weight 100,000 (termination is mainly by combination). 

The decomposition of the peroxyketals (53) follows a stepwise, rather than a concerted mechanism. Initial homolysis of one of the 0-0 bonds gives an aikoxy radical and an a-peroxyalkoxy radical (Scheme 3.36).306"08"210 This latter species decomposes by P-scission with loss of either a peroxy radical to form a ketone as byproduct or an alkyl radical to form a peroxyester intermediate. The peroxyester formed may also decompose to radicals under the reaction conditions. Thus, four radicals may be derived from the one initiator molecule. 

Simple alkyl radicals thus seem ideal as initiating species ... 

Thus alkyl radicals do not give unwanted end-group functionality and the kinetics of initiation arc comparatively uncomplicated. However, this situation can be perturbed by substitution at or near the radical center. 

Certain, Y, Y-dialkyl dithioearbamates [e,g. benzyl A)/V-diethyl dithiocarbamate (14)] and xanthates have been used as photoinitiators. Photodissociation of the C-S bond of these compounds yields a reactive alkyl radical (to initiate polymerization) and a less reactive sulfur-centered radical (to undergo primary-radical termination) as shown in Scheme 9.9.30 41 4 ... 

---