Alkyl nitrite reaction with

Nitrous acid or alkyl nitrites react with a number of nitrogen compounds to yield tetrazoles. For example, hydrazidines (87), which can be prepared in situ from the corresponding iminoesters, react with nitrous acid or its derivatives to give 1-substituted tetrazoles (88).150-152 This reaction (Eq. 17), is one of the most extensively used methods for the synthesis of... 

Other processes described in the Hterature for the production of malonates but which have not gained industrial importance are the reaction of ketene [463-51-4] with carbon monoxide in the presence of alkyl nitrite and a palladium salt as a catalyst (35) and the reaction of dichioromethane [75-09-2] with carbon monoxide in the presence of an alcohol, dicobalt octacarbonyl, and an imida2ole (36). 

Under alkaline conditions, alkyl nitrites nitrosate imidazoles which possess a free NH group in the 4-position (70AHC(12)103). Nitrosation of 3,5-dimethylpyrazole gives the 4-diazonium salt by further reaction of the nitroso compound with more NO". 5-Pyrazolinones are often nitrosated readily at the 4-position. 3-Alkyl-5-acetamidoisothiazoles undergo 4-nitrosation. 

A. number of rutro compounds used m ndturdl product synthesis have been prepared by the n of alkyl halides Some recent examples are summarized m Table 2 4 fi-Nitro carbonyl compounds are important for synthesis of natural products The reaction of alkyl vinyl ketones with sodium nitrite and acetic acid in THF gives thecorrespondmgfi-nitro carbonyl compounds in42-82% ""rhis method is better for the preparation of fi-nitro carbonyl compounds than the nitration of the corresponclmg halides... 

In most cases diazonium salts are not isolated, but are converted into products by reactions that can be carried out in situ. Moreover, it is actually recommended not to isolate these salts, not even for purification purposes, as many of them have a tendency to explode. In addition, the high solubility of most diazonium salts in water makes precipitation from this medium difficult. Therefore, to obtain solid diazonium salts the recommended method for many decades was to carry out diazotizations in ethanol followed by precipitation with ether. As inorganic salts of nitrous acid are scarely soluble in ethanol, Knoevenagel recommended alkyl nitrites (ethyl or isopentyl nitrite) as diazotization reagents as long ago as 1890. Various other solvents have subsequently been used for diazotizations with alkyl nitrites (see Saunders and Allen, 1985, p. 23 ff.), but as a method for obtaining solid diazonium salts this has been superseded by the isolation of diazonium tetrafluoroborates and, to a lesser degree, of hexafluorophosphates. 

There is evidence that the reaction with alkyl nitrites also involves attack by aryl radicals. 

Primary, secondary, and tertiary aliphatic amines have been cleaved to give aldehydes, ketones, or carboxylic acids with aqueous bromine and with neutral permanganate. The other product of this reaction is the amine with one less alkyl group. In a different type of procedure, primary alkyl primary amines can be converted to ge/n-dihalides, RCH2NH2 —> RCHX2 (X =Br or Cl), by treatment with an alkyl nitrite and the anhydrous copper(I) halide. 

Cyanide and thiocyanate anions in aqueous solution can be determined as cyanogen bromide after reaction with bromine [686]. The thiocyanate anion can be quantitatively determined in the presence of cyanide by adding an excess of formaldehyde solution to the sample, which converts the cyanide ion to the unreactive cyanohydrin. The detection limits for the cyanide and thiocyanate anions were less than 0.01 ppm with an electron-capture detector. Iodine in acid solution reacts with acetone to form monoiodoacetone, which can be detected at high sensitivity with an electron-capture detector [687]. The reaction is specific for iodine, iodide being determined after oxidation with iodate. The nitrate anion can be determined in aqueous solution after conversion to nitrobenzene by reaction with benzene in the presence of sulfuric acid [688,689]. The detection limit for the nitrate anion was less than 0.1 ppm. The nitrite anion can be determined after oxidation to nitrate with potassium permanganate. Nitrite can be determined directly by alkylation with an alkaline solution of pentafluorobenzyl bromide [690]. The yield of derivative was about 80t.with a detection limit of 0.46 ng in 0.1 ml of aqueous sample. Pentafluorobenzyl p-toluenesulfonate has been used to derivatize carboxylate and phenolate anions and to simultaneously derivatize bromide, iodide, cyanide, thiocyanate, nitrite, nitrate and sulfide in a two-phase system using tetrapentylammonium cWoride as a phase transfer catalyst [691]. Detection limits wer Hi the ppm range. 

In addition to the aqueous method for diazotization in aqueous solution, diazonium ions can be generated in organic solvents by reaction with alkyl nitrites. 

An alternative method for reductive dediazonation involves in situ diazotization by an alkyl nitrite in dimethylformamide.96 This reduction is a chain reaction with the solvent acting as the hydrogen atom donor. 

Good yields of chlorides have also been obtained for reaction of isolated diazonium tetrafluoroborates with FeCl2-FeCl3 mixtures.100 It is also possible to convert anilines to aryl halides by generating the diazonium ion in situ. Reaction of anilines with alkyl nitrites and Cu(II) halides in acetonitrile gives good yields of aryl chlorides and bromides.101... 

The reaction of alkyl halides with metal nitrites is one of the most important methods for the preparation of nitroalkanes. As a metal nitrite, silver nitrite (Victor-Meyer reaction), potassium nitrite, or sodium nitrite (Kornblum reaction) have been frequently used. The products are usually a mixture of nitroalkanes and alkyl nitrites, which are readily separated by distillation (Eq. 2.47). The synthesis of nitro compounds by this process is well documented in the reviews, and some typical cases are listed in Table 2.3.92a Primary and secondary alkyl iodides and bromides as well as sulfonate esters give the corresponding nitro compounds in 50-70% yields on treatment with NaN02 in DMF or DMSO. Some of them are described precisely in vol 4 of Organic Synthesis. For example, 1,4-dinitrobutane is prepared in 41 -46% yield by the reaction of 1,4-diiodobutane with silver nitrite in diethyl ether.92b 1-Nitrooctane is prepared by the reaction with silver nitrite in 75-80% yield. The reaction of silver nitrite with secondary halides gives yields of nitroalkanes of about 15%, whereas with tertiary halides the yields are 0-5%.92c Ethyl a-nitrobutyrate is prepared by the reaction of ethyl a-bromobutyrate in 68-75% yield with sodium nitrite in DMF.92d Sodium nitrite is considerably more soluble in DMSO than in DMF as a consequence, with DMSO, much more concentrated solutions can be employed and this makes shorter reaction times possible.926... 

Thus, the reaction of alkyl halides and a-halo esters with sodium nitrite provides a very useful synthetic method for nitroalkanes and a-nitro esters. However, ethyl bromoacetate is exceptional in that it fails to give ethyl nitroacetate on treatment with sodium nitrite.93 This is due to the acidic hydrogen of the ethyl nitroacetate, which undergoes a further reaction with sodium nitrite to give the oxidized products (see Section 6.1, which discusses the Nef reaction). In a similar way, the reaction of benzyl bromide with sodium nitrite at 25 °C gives benzoic acid predominantly. To get phenylnitromethane, the reaction must be carried out at low temperature (-16 °C) (Eq. 2.48).93... 

Because primary alkyl bromides can be converted into the corresponding nitro compounds by the action of NaN02 in DMSO, primary alkyl bromides are converted directly into the corresponding carboxylic acids by the reaction with an excess of sodium nitrite in acetic acid (Eq. 6.16).26... 

Electrophilic substitution of the ring hydrogen atom in 1,3,4-oxadiazoles is uncommon. In contrast, several reactions of electrophiles with C-linked substituents of 1,3,4-oxadiazole have been reported. 2,5-Diaryl-l,3,4-oxadiazoles are bromi-nated and nitrated on aryl substituents. Oxidation of 2,5-ditolyl-l,3,4-oxadiazole afforded the corresponding dialdehydes or dicarboxylic acids. 2-Methyl-5-phenyl-l,3,4-oxadiazole treated with butyllithium and then with isoamyl nitrite yielded the oxime of 5-phenyl-l,3,4-oxadiazol-2-carbaldehyde. 2-Chloromethyl-5-phenyl-l,3,4-oxadiazole under the action of sulfur and methyl iodide followed by amines affords the respective thioamides. 2-Chloromethyl-5-methyl-l,3,4-oxadia-zole and triethyl phosphite gave a product, which underwent a Wittig reation with aromatic aldehydes to form alkenes. Alkyl l,3,4-oxadiazole-2-carboxylates undergo typical reactions with ammonia, amines, and hydrazines to afford amides or hydrazides. It has been shown that 5-amino-l,3,4-oxadiazole-2-carboxylic acids and their esters decarboxylate. 

The benzyl ligand of benzylbis(dimethylglyoximato)pyridine cobalt complex has been selectively converted to 3,5-dibenzyl-l,2,4-oxadiazole by a reaction with alkyl nitrite in the presence of light (426). The reaction proceeds by the in situ formation of an oxime and a nitrile oxide (Scheme 1.44). 

Condensations with alkyl nitrites and nitrates, however, are not so generally applicable as the true ethyl acetoacetate reaction, and the possibility is not excluded that they proceed in another way compounds with mobile hydrogen might first he added to the inorganic part of the ester by means of an aldol condensation. The fact that fluorene, which contains no active double bond at all, combines with ethyl nitrate (as well as with ethyl oxalate) and sodium ethoxide in the same way, yielding oci-nitrofluorene, seems to support this second theory (W. Wislicenus). 

TABLE 3. Second-order rate constants for the reaction of alkyl nitrites with the thiolate ions derived from three thiols in water at 25 °C... 

---