Alkenes butadiene

Reaction of a,/MJnsaturated Fischer Carbene Complexes with Alkenes, Butadienes, Enamines, and Imines... 

The cyclopropanation of gaseous alkenes, butadiene, and allene (see Section 1.2.1.2.4.2.6.3.3., Table 11, entry 1) by diazoacetic esters can be achieved by passing a vapor-gas mixture of the alkene and the diazo compound at atmospheric pressure through a tubular continuous flow reactor which contains a copper catalyst (ca. 10%) deposited on pumice. In this manner, alkyl cyclopropanecarboxylates were obtained in yields of up to 50% with cop-per(II) sulfate (typical reaction temperature 65-110"C, contact time 3.6 s) or copper(II) oxide (85-200°C, 5s) as catalysts. 

Steamcracking Ethane, propane, naphtha Alkenes, butadiene, C4 fraction, BTX, petrol... 

The application of hypervalent iodine(III) mediated and catalyzed amination of hydrocarbon substrates has developed into a useful tool for organic synthesis. Reactions comprise direct amination of sp-, sp -, and sp -hybridized C-H bonds and numerous oxidative transformations of alkenes, butadienes, and allenes. Some of these methods have been developed directly in the form of catalytic transformations, which adds to underline the synthetic potential of the field. Where applicable, the possibility for enantioselective transformations has been demonstrated for some cases. One can be optimistic that hypervalent iodine chemistry is able to complement existing methodology for oxidative amination reactions in a practical manner over the next few years. 

Migration of a hydride ligand from Pd to a coordinated alkene (insertion of alkene) to form an alkyl ligand (alkylpalladium complex) (12) is a typical example of the a, /(-insertion of alkenes. In addition, many other un.saturated bonds such as in conjugated dienes, alkynes, CO2, and carbonyl groups, undergo the q, /(-insertion to Pd-X cr-bonds. The insertion of an internal alkyne to the Pd—C bond to form 13 can be understood as the c -carbopa-lladation of the alkyne. The insertion of butadiene into a Ph—Pd bond leads to the rr-allylpalladium complex 14. The insertion is usually highly stereospecific. 

The oxidative coupling of alkenes which have two substituents at the 2 posi-tion, such as isobutylene, styrene, 2-phenylpropene, 1,1-diphenylethylene, and methyl methacrylate, takes place to give the 1,1,4.4-tetrasubstituted butadienes 285 by the action of Pd(OAc)2 or PdCF in the presence of sodium acetate[255-257]. Oxidation of styrene with Pd(OAc)2 produces 1.4-diphenylbutadiene (285, R = H) as a main product and a- and /3-acetoxystyrenes as minor pro-ducts[258]. Prolonged oxidation of the primary coupling product 285 (R = Me) of 2-phenylpropene with an excess of Pd(OAc)2 leads slowly to p-... 

It is possible to prepare 1-acetoxy-4-chloro-2-alkenes from conjugated dienes with high selectivity. In the presence of stoichiometric amounts of LiOAc and LiCl, l-acetoxy-4-chloro-2-hutene (358) is obtained from butadiene[307], and cw-l-acetoxy-4-chloro-2-cyclohexene (360) is obtained from 1.3-cyclohexa-diene with 99% selectivity[308]. Neither the 1.4-dichloride nor 1.4-diacetate is formed. Good stereocontrol is also observed with acyclic diene.s[309]. The chloride and acetoxy groups have different reactivities. The Pd-catalyzed selective displacement of the chloride in 358 with diethylamine gives 359 without attacking allylic acetate, and the chloride in 360 is displaced with malonate with retention of the stereochemistry to give 361, while the uncatalyzed reaction affords the inversion product 362. 

Formic acid behaves differently. The expected octadienyl formate is not formed. The reaction of butadiene carried out in formic acid and triethylamine affords 1,7-octadiene (41) as the major product and 1,6-octadiene as a minor product[41-43], Formic acid is a hydride source. It is known that the Pd hydride formed from palladium formate attacks the substituted side of tt-allylpalladium to form the terminal alkene[44] (see Section 2.8). The reductive dimerization of isoprene in formic acid in the presence of Et3N using tri(i)-tolyl)phosphine at room temperature afforded a mixture of dimers in 87% yield, which contained 71% of the head-to-tail dimers 42a and 42b. The mixture was treated with concentrated HCl to give an easily separable chloro derivative 43. By this means, a- and d-citronellol (44 and 45) were pre-pared[45]. 

Let us now examine the Diels-Alder cycloaddition from a molecular orbital perspective Chemical experience such as the observation that the substituents that increase the reac tivity of a dienophile tend to be those that attract electrons suggests that electrons flow from the diene to the dienophile during the reaction Thus the orbitals to be considered are the HOMO of the diene and the LUMO of the dienophile As shown m Figure 10 11 for the case of ethylene and 1 3 butadiene the symmetry properties of the HOMO of the diene and the LUMO of the dienophile permit bond formation between the ends of the diene system and the two carbons of the dienophile double bond because the necessary orbitals overlap m phase with each other Cycloaddition of a diene and an alkene is said to be a symmetry allowed reaction... 

The dienoplules for reaction with butadiene can be alkenes, allenes, and alkynes. Simple alkenes like ethylene are poor dienoplules resulting in sluggish reactions. Substituted olefins, X—C=C—X, are more reactive when X and/or X are C=C, Ar, COOR, COOH, COH, COR, COCl, CN,... 

Fig. 1. Vapor-pressure ratios of the alkanes, alkenes, and dienes with respect to / -butane A, isobutane B, isobutylene C, 1-butene D, 1,3-butadiene E,...

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

Compounds considered carcinogenic that may be present in air emissions include benzene, butadiene, 1,2-dichloroethane, and vinyl chloride. A typical naphtha cracker at a petrochemical complex may release annually about 2,500 metric tons of alkenes, such as propylenes and ethylene, in producing 500,000 metric tons of ethylene. Boilers, process heaters, flares, and other process equipment (which in some cases may include catalyst regenerators) are responsible for the emission of PM (particulate matter), carbon monoxide, nitrogen oxides (200 tpy), based on 500,000 tpy of ethylene capacity, and sulfur oxides (600 tpy). 

Although hexafluoro-l,3-butadiene is better known for its [2+2] reactions, its Diels-Alder reactions, particularly with electron-deficient alkenes such as acrylonitrile and perfluoropropene, are not unknown [9] The first report of a Diels-Alder reaction is with an acetylenic dienophile Although the major product of Us reaction with phenylacetylene is its [2+2] adduct, a 3 5% yield of products of a Diels-Alder reaction is also observed [123] (equation 103)... 

Cyclotrithiazyl chloride is also a useful reagent in organic chemistry in the fusion of 1,2,5-thiadiazoles to quinones as well as the synthesis of (a) isothiazoles from 2,5-disubstituted furans and (b) bis-1,2,5-thiadiazoles from A-alkylpyrroles (Scheme 8.4). Alkenes and alkynes react readily with (NSC1)3 to give 1,2,5-thiadiazoles, while 1,4-diphenyl-1,3-butadiene gives a variety of heterocyclic products including a bis(l, 2,5-thiadiazole). ... 

A simple approach for the formation of 2-substituted 3,4-dihydro-2H-pyrans, which are useful precursors for natural products such as optically active carbohydrates, is the catalytic enantioselective cycloaddition reaction of a,/ -unsaturated carbonyl compounds with electron-rich alkenes. This is an inverse electron-demand cycloaddition reaction which is controlled by a dominant interaction between the LUMO of the 1-oxa-1,3-butadiene and the HOMO of the alkene (Scheme 4.2, right). This is usually a concerted non-synchronous reaction with retention of the configuration of the die-nophile and results in normally high regioselectivity, which in the presence of Lewis acids is improved and, furthermore, also increases the reaction rate. 

The carbo-Diels-Alder reaction of acrolein with butadiene (Scheme 8.1) has been the standard reaction studied by theoretical calculations in order to investigate the influence of Lewis acids on the reaction course and several papers deal with this reaction. As an extension of an ab-initio study of the carbo-Diels-Alder reaction of butadiene with acrolein [5], Houk et al. investigated the transition-state structures and the origins of selectivity of Lewis acid-catalyzed carbo-Diels-Alder reactions [6]. Four different transition-state structures were considered (Fig. 8.4). Acrolein can add either endo (N) or exo (X), in either s-cis (C) or s-trans (T), and the Lewis acid coordinates to the carbonyl in the molecular plane, either syn or anti to the alkene. 

The Diels-Alder reaction,is a cycloaddition reaction of a conjugated diene with a double or triple bond (the dienophile) it is one of the most important reactions in organic chemistry. For instance an electron-rich diene 1 reacts with an electron-poor dienophile 2 (e.g. an alkene bearing an electron-withdrawing substituent Z) to yield the unsaturated six-membered ring product 3. An illustrative example is the reaction of butadiene 1 with maleic anhydride 4 ... 

Because a monosubstituted alkene has a AT/Ohyc rog of approximately -126 kj/mol, we might expect that a compound with two monosubstituted double bonds would have a Af/0hyjrog approximately twice that value, or -252 kj/mol. Nonconjugated dienes, such as 1,4-pentadiene (AH°hydrog = —253 kj/mol), meet this expectation, but the conjugated diene 1,3-butadiene (AT/°hydr0g = -236 kj/mol) does not. 1,3-Butadiene is approximately 16 kj/mol (3.8 kcal/mol) more stable than expected. 

Perhaps the most striking difference between conjugated and nonconjugated dienes is that conjugated dienes undergo an addition reaction with alkenes to yield substituted cyclohexene products. For example, 1,3-butadiene and 3-buten-2-one give 3-cycIohexenyl methyl ketone. 

The synthesis of 2-chloro-2,3,3-trifluorocyclobutyl acetate illustrates a general method of preparing cyclobutanes by heating chlorotrifluoroethylene, tetrafluoroethylene, and other highly fluorinated ethylenes with alkenes. The reaction has recently been reviewed.11 Chlorotrifluoroethylene has been shown to form cyclobutanes in this way with acrylonitrile,6 vinylidene chloride,3 phenylacetylene,7 and methyl propiolate.3 A far greater number of cyclobutanes have been prepared from tetrafluoroethylene and alkenes 4,11 when tetrafluoroethylene is used, care must be exercised because of the danger of explosion. The fluorinated cyclobutanes can be converted to a variety of cyclobutanes, cyclobutenes, and butadienes. 

The commonly held view of the uniqueness of Ag for ethylene epoxidation may soon change in view both of the propene epoxidation work of Haruta and coworkers on Au/Ti02 catalysts upon cofeeding H2 123 and also in view of the recent demonstration by Lambert and coworkers124 126 that Cu(lll) and Cu(110) surfaces are both extremely efficient in the epoxidation of styrene and butadiene to the corresponding epoxides. In fact Cu was found to be more selective than Ag under UHV conditions with selectivities approaching 100%.124-126 The epoxidation mechanism appears to be rather similar with that on Ag as both systems involve O-assisted alkene adsorption and it remains to be seen if appropriately promoted Cu124 126 can maintain its spectacular selectivity under process conditions. 

The exact mechanisms of the Raney nickel reactions are still in doubt, though they are probably of the free radical type. It has been shown that reduction of thiophene proceeds through butadiene and butene, not through 1-butanethiol or other sulfur compounds, that is, the sulfur is removed before the double bonds are reduced. This was demonstrated by isolation of the alkenes and the failure to isolate any potential sulfur-containing intermediates. 

Symmetry considerations have also been advanced to explain predominant endo addition. In the case of 2 + 4 addition of butadiene to itself, the approach can be exo or endo. It can be seen (Fig. 15.10) that whether the HOMO of the diene overlaps with the LUMO of the alkene or vice versa, the... 

Conjugated dienes can be dimerized or trimerized at their 1,4 positions (formally, [4 4- 4] and [4 4-4 4-4] cycloadditions) by treatment with certain complexes or other transition metal compounds. " Thus butadiene gives 1,5-cyclooctadiene and 1,5,9-cyclododecatriene. " The relative amount of each product can be controlled by use of the proper catalyst. For example, Ni P(OC6H4—o-Ph)3 gives predominant dimerization, while Ni(cyclooctadiene)2 gives mostly trimerization. The products arise, not by direct 1,4 to 1,4 attack, but by stepwise mechanisms involving metal-alkene complexes. " ... 

The Diels-Alder reaction, in which two alkenes combine to give a new product, is one of the most frequently used reactions for the synthesis of organic compounds. Thousands of examples are found in the chemical literature. The reaction of butadiene is a simple example. 

The mixtures are particularly dangerous with alkenes, cycloalkenes and dienes. Accidents have been reported with propene, butenes, isobutylenes, 1-hexene, butadiene and cyclopentadiene. However, the reaction below is not thought to be dangerous if one operates at a temperature of 30°C and under two bar. 

Bis(diamino)alanes (R2N)2A1H were used for the hydroalumination of terminal and internal alkenes [18, 19]. TiCb and CpjTiCb are suitable catalysts for these reactions, whereas CpjZrCb exhibits low catalytic activity. The hydroaluminations are carried out in benzene or THF soluhon at elevated temperatures (60°C). Internal linear cis- and trans-alkenes are converted into n-alkylalanes via an isomerization process. Cycloalkenes give only moderate yields tri- and tetrasubstituted double bonds are inert. Hydroaluminahon of conjugated dienes like butadiene and 1,3-hexa-diene proceeds with only poor selechvity. The structure of the hydroaluminahon product of 1,5-hexadiene depends on the solvent used. While in benzene cyclization is observed, the reaction carried out in THF yields linear products (Scheme 2-10). 

---