Aldol reactions silyl enol ethers/acetals

For some condensations with silylated substrates as starting compounds, trimethylsilyl inflate can be used as a catalyst [103, 104, 105] Atypical example of such a reaction is the aldol type condensation of silyl enol ethers and acetals catalyzed by 1-5 mol% of trimethylsilyl inflate [103] (equation 53)... 

The enolates of other carbonyl compounds can be used in mixed aldol reactions. Extensive use has been made of the enolates of esters, thiol esters, amides, and imides, including several that serve as chiral auxiliaries. The methods for formation of these enolates are similar to those for ketones. Lithium, boron, titanium, and tin derivatives have all been widely used. The silyl ethers of ester enolates, which are called silyl ketene acetals, show reactivity that is analogous to silyl enol ethers and are covalent equivalents of ester enolates. The silyl thioketene acetal derivatives of thiol esters are also useful. The reactions of these enolate equivalents are discussed in Section 2.1.4. 

The Mukaiyama aldol reaction refers to Lewis acid-catalyzed aldol addition reactions of silyl enol ethers, silyl ketene acetals, and similar enolate equivalents,48 Silyl enol ethers are not sufficiently nucleophilic to react directly with aldehydes or ketones. However, Lewis acids cause reaction to occur by coordination at the carbonyl oxygen, activating the carbonyl group to nucleophilic attack. 

In aldol reactions, especially Mukaiyama aldol reactions, TiIV compounds are widely employed as efficient promoters. The reactions of aldehydes or ketones with reactive enolates, such as silyl enol ethers derived from ketones, proceed smoothly to afford /3-hydroxycarbonyl compounds in the presence of a stoichiometric amount of TiCl4 (Scheme 17).6, 66 Many examples have been reported in addition to silyl enol ethers derived from ketones, ketene silyl acetals derived from ester derivatives and vinyl ethers can also serve as enolate components.67-69... 

Dialkyl(trimethylsilyl)phosphines undergo 1,4-addition to a,/3-unsaturated ketones and esters to give phosphine-substituted silyl enol ethers and silyl ketene acetals, respectively. A three-component coupling reaction of a silylphosphine, activated alkenes, and aldehydes in the presence of a catalytic amount of GsF affords an aldol product (Scheme 76).290 291... 

On the other hand, the method of Mukaiyama can be succesfully applied to silyl enol ethers of acetic and propionic acid derivatives. For example, perfect stereochemical control is attained in the reaction of silyl enol ether of 5-ethyl propanethioate with several aldehydes including aromatic, aliphatic and a,j5-unsaturated aldehydes, with syir.anti ratios of 100 0 and an ee >98%, provided that a polar solvent, such as propionitrile, and the "slow addition procedure " are used. Thus, a typical experimental procedure is as follows [32e] to a solution of tin(II) triflate (0.08 mmol, 20 mol%) in propionitrile (1 ml) was added (5)-l-methyl-2-[(iV-l-naphthylamino)methyl]pyrrolidine (97b. 0.088 mmol) in propionitrile (1 ml). The mixture was cooled at -78 °C, then a mixture of silyl enol ether of 5-ethyl propanethioate (99, 0.44 mmol) and an aldehyde (0.4 mmol) was slowly added to this solution over a period of 3 h, and the mixture stirred for a further 2 h. After work-up the aldol adduct was isolated as the corresponding trimethylsilyl ether. Most probably the catalytic cycle is that shown in Scheme 9.30. 

The cationic iridium complex [Ir(cod)(PPh3)2]OTf, when activated by H2, catalyzes the aldol reaction of aldehydes 141 or acetal with silyl enol ethers 142 to afford 143 (Equation 10.37) [63]. The same Ir complex catalyzes the coupling of a, 5-enones with silyl enol ethers to give 1,5-dicarbonyl compounds [64]. Furthermore, the alkylation of propargylic esters 144 with silyl enol ethers 145 catalyzed by [Ir(cod)[P(OPh)3]2]OTf gives alkylated products 146 in high yields (Equation 10.38) [65]. An iridium-catalyzed enantioselective reductive aldol reaction has also been reported [66]. 

The reactions proceeded efficiently under mild conditions in short time. The silyl enol ethers reacted with the activated acetals or aldehydes at -78 °C to give predominant erythro- or threo-products [136, 137] respectively. In the same manner, the aldol reaction of thioacetals, catalyzed by an equimolar amount of catalyst, resulted in <-ketosulfides [139] with high diastereoselectivity. In the course of this investigation, the interaction of silyl enol ethers with a,]3-unsaturated ketones, promoted by the trityl perchlorate, was shown to proceed regioselec-tively through 1,2- [141] or 1,4-addition [138]. The application of the trityl salt as a Lewis acid catalyst was spread to the synthesis of ]3-aminoesters [142] from the ketene silyl acetals and imines resulting in high stereoselective outcome. 

Recently it was found that the aldol reaction of silyl enol ethers with acetals or aldehydes is effectively promoted by a catalytic amount of trityl perchlorate to give the corresponding aldols in good yields (44,45). Polymer-bound trityl perchlorate also successfully catalyzed the aldol reaction (45). 

Cross aldol reactions of silyl enol ethers with acetals (25 - 26, and 27 - 28) are also mediated by EGA. The reaction runs smoothly at —78 °C in a CH2CI2— —LiClO —Et NClO —(Pt) system. At an elevated temperature protonation of both enol ether and acetal occurs competitively to give 28 in a poor yield. Table 5 summarizes yields and diastereoselectivities of 28 obtained by EGA, TiCl TMSOTf and TrtClO 5 . The EGA method is superior to TiCl with regard to the stereocontrol, and comparable with TMSOTf and TrtClO in both stereocontrol and yield. 

Aldol reactions.2 This combination of catalysts is effective for promoting reaction of acetals with silyl enol ethers and ketene silyl acetals. It can also promote reaction of aldehydes or imines with ketene silyl acetals. The reactions occur in high yield at 25° either CH3CN or THF can be used as the solvent. 

Carbonyl activation and deactivation.1 Aldehydes, but not ketones, undergo aldol condensation with silyl enol ethers at —78° in the presence of dibutyltin bistriflate. In contrast, the dimethyl acetals of ketones, but not of aldehydes, can undergo this condensation (Mukaiyama reaction) with silyl enol ethers at -78° with almost complete discrimination, which is not observed with the usual Lewis-acid catalysts. Thus dibutyltin bistriflate activates aldehydes, but deactivates acetals of... 

Modem variants of the Mukaiyama aldol addition start from silyl enol ethers, not from enol ethers, and use an aldehyde instead of the acetal as the electrophile. Mukaiyama aldol additions of this kind have been included in the C,C coupling reactions that build the basic repertoire of modem synthetic chemistry and can even be performed in a catalytic enantioselective fashion. 

Aldol reaction,6 This triflate is an effective catalyst for an aldol-type reaction between silyl enol ethers and acetals at -78°. The reaction shows moderate to high svn-selectivity regardless of the geometry of the enol ether. 

Aldol reactions of various silyl enol ethers or ketone silyl acetals with aldehydes and imines proceed smoothly in the presence of catalytic amount of 516 or 519 (Equations (242) and (243)).1034-1037 B(G6F5)3 516 catalyzed the... 

Bis(pentafluorophenyl) tin dibromide effects the Mukaiyama aldol reaction of ketene silyl acetal with ketones, but promotes no reaction with acetals under the same conditions. On the other hand, reaction of silyl enol ether derived from acetophenone leads to the opposite outcome, giving acetal aldolate exclusively. This protocol can be applied to a bifunctional substrate (Equation (105)). Keto acetal is exposed to a mixture of different types of enol silyl ethers, in which each nucleophile reacts chemoselectively to give a sole product.271... 

The silyl enol ether that is the initial product from conjugate addition of a silyl enol ether or silyl ketene acetal need not be hydrolysed but can also be used in aldol reactions. This example uses trityl perchlo-... 

First, chemoselective (Chapter 24) conjugate addition of the silyl ketene acetal on the enone is preferred to direct aldol reaction with the aldehyde. Then an aldol reaction of the intermediate silyl enol ether on the benzaldehyde follows. The stereoselectivity results, firstly, from attack of benzalde-hyde on the less hindered face of the intermediate silyl enol ether, which sets the two side chains trans on the cyclohexanone, and, secondly, from the intrinsic diastereoselectivity of the aldol reaction (this is treated in some detail in Chapter 34). This is a summary mechanism. 

The other side of the coin is that the S 2 reaction at carbon is not much affected by partial positive [ charge (5+) on the carbon a tom. The Sn2 reaction at silicon is affected by the charge on silicon. The r most electrophilic silicon compounds are the silyl triflates and it is estimated that they react some 108-109 times faster with oxygen nucleophiles than do silyl chlorides. Trimethylsilyl triflate is, in fact, an excellent Lewis acid and can be used to form acetals or silyl enol ethers from carbonyl compounds, and to react these two together in aldol-style reactions. In all three reactions the triflate attacks an oxygen atom. 

When the acetal and the silyl enol ether are mixed with the same Lewis acid catalyst, Noyori found that an efficient aldol-style condensation takes place with the acetal providing the electrophile. The reaction is successful at low temperatures and only a catalytic amount of the Lewis acid is needed. Under these conditions, with no acid or base, few side-reactions occur. Notice that the final desilylation is carried out by the triflate anion to regenerate the Lewis acid Me3Si-OTf. Triflate would be a very poor nucleophile for saturated carbon but is reasonable for silicon because oxygen is the nucleophilic atom. 

Various substrates have been successfully used in the present LASC-catalysed aldol reaction. Aromatic as well as aliphatic, a, 3-unsaturated and heterocyclic aldehydes worked well. As for silicon enolates, silyl enol ethers derived from ketones as well as ketene silyl acetals derived from thioesters and esters reacted well to give the corresponding adducts in high yields. It is noted that highly water-sensitive ketene silyl acetals reacted smoothly in water under these conditions. 

A kinetic study of the Ph2BOH-catalysed reactions of several aldehydes with 2 revealed that the rate of the disappearance of 2 followed first-order kinetics and was independent from the reactivity of the aldehydes used. Taking into account this result, we have proposed the reaction mechanism in which a silyl enol ether is transformed to the corresponding diphenylboryl enolate before the aldol addition step takes place (Scheme 13.1). The high diastereoselectivity is consistent with the mechanism, in which the aldol step proceeds via a chair-like six-membered transition state. The opposite diastereoselectivity in the reaction with the geometrical isomers of the thioketene silyl acetal shown in Table 13.3 also supports the mechanism via the boron enolate, because this trend was also observed in the classical boron enolate-mediated reactions in dry organic solvents. Although we have not yet observed the boron enolates directly under the reaction conditions, this mechanism can explain all of the experimental data obtained and is considered as the most reasonable one. As far as we know, this is the first example of... 

Aldol-type reactions. Trityl perchlorate catalyzes an aldol-type reaction between silyl enol ethers and acetals or ketals to give p-alkoxy ketones. The yields are comparable to those obtained with TiCU (6, 594). The iyn-aldol is formed predominantly ( 4 1). 

Mukaiyama Aldol Condensation. The BINOL-derived titanium complex BINOL-T1CI2 is an efficient catalyst for the Mukaiyama-type aldol reaction. Not only ketone silyl enol ether (eq 25), but also ketene silyl acetals (eq 26) can be used to give the aldol-type products with control of absolute and relative stereochemistry. 

Analogous with the previous results of enol silyl ethers of ketones, nonsubstituted ketene silyl acetals are found to exhibit lower levels of stereoregulation, while the propionate-derived ketene silyl acetals display a high level of asymmetric induction. The reactions with aliphatic aldehydes, however, resulted in a slight reduction in optical and chemical yields. With phenyl ester-derived ketene silyl acetals, syn adducts predominate, but the selectivities are moderate in most cases in comparison with the reactions of ketone-derived silyl enol ethers. Exceptions are a,p-unsaturated aldehydes, which revealed excellent diastereo- and enantioselectivities. The observed syn selectivity and re-face attack of nucleophiles on the carbonyl carbon of aldehydes are consistent with the aforementioned aldol reactions of ketone-derived enol silyl ethers. 

The asymmetric aldol reaction of enol silyl ethers of thioesters with aldehydes is performed in high enantiomeric excess by employing a chiral promoter, tin(II) trifluoromethanesulfonate coordinated with chiral diamine 1 and tri-n-butyltin fluoride (eqs 20 and 21). Highly enantioselective aldol reactions of achiral ketene silyl acetals with achiral aldehydes are carried out by means of the same chiral promoter (eq 22). ... 

Mukaiyama aldol reactions of various silyl enol ethers or ketene silyl acetals with aldehydes or other electrophiles proceed smoothly in the presence of 2 mol % B(CgF5)3 [151a,c]. The following characteristic features should be noted (i) the products can be isolated as j8-trimethylsilyloxy ketones when crude adducts are worked-up without exposure to acid (ii) this reaction can be conducted in aqueous media, so that the reaction of the silyl enol ether derived from propiophenone with a commercial aqueous solution of formaldehyde does not present any problems (iii) the rate of an aldol reaction is markedly increased by use of an anhydrous solution of B(C6Fs)3 in toluene under an argon atmosphere and (iv) silyl enol ethers can be reacted with chloromethyl methyl ether or trimethylorthoformate hydroxymethyl, methoxy-methyl, or dimethoxymethyl Cl groups can be introduced at the position a to the carbonyl group. These aldol-type reactions do not proceed when triphenylborane is used (Eq. 92). 

---