Aldol reactions complexes

Aldol reactions. Complexation of the carbonyl with the bulky aluminum reagent forces an enone to undergo aldol reaction at the y-position. 

A useful catalyst for asymmetric aldol additions is prepared in situ from mono-0> 2,6-diisopropoxybenzoyl)tartaric acid and BH3 -THF complex in propionitrile solution at 0 C. Aldol reactions of ketone enol silyl ethers with aldehydes were promoted by 20 mol % of this catalyst solution. The relative stereochemistry of the major adducts was assigned as Fischer- /ir o, and predominant /i -face attack of enol ethers at the aldehyde carbonyl carbon atom was found with the (/ ,/ ) nantiomer of the tartaric acid catalyst (K. Furuta, 1991). 

In the last fifteen years macrolides have been the major target molecules for complex stereoselective total syntheses. This choice has been made independently by R.B. Woodward and E.J. Corey in Harvard, and has been followed by many famous fellow Americans, e.g., G. Stork, K.C. Nicolaou, S. Masamune, C.H. Heathcock, and S.L. Schreiber, to name only a few. There is also no other class of compounds which is so suitable for retrosynthetic analysis and for the application of modem synthetic reactions, such as Sharpless epoxidation, Noyori hydrogenation, and stereoselective alkylation and aldol reactions. We have chosen a classical synthesis by E.J. Corey and two recent syntheses by A.R. Chamberlin and S.L. Schreiber as examples. 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

In general, a mixed aldol reaction between two similar aldehyde or ketone partners leads to a mixture of four possible products. For example, base treatment of a mixture of acetaldehyde and propanal gives a complex product mixture containing two "symmetrical" aldol products and two "mixed" aldol products. Clearly, such a reaction is of no practical value. 

Hydroxy-substituted iron-acyl complexes 1, which are derived from aldol reactions of iron-acyl enolates with carbonyl compounds, are readily converted to the corresponding /i-methoxy or /1-acetoxy complexes 2 on deprotonation and reaction of the resulting alkoxide with iodomethane or acetic anhydride (Tabic 1). Further exposure of these materials to base promotes elimination of methoxide or acetate to provide the a,/ -unsaturated complexes (E)-3 and (Z)-3 (Table 2). 

Aldol reaction of the a-trimethylsilylated enolate 9 with aldehydes provides nearly equal amounts of chromatographically separable ( )- and (Z)-isomers of iron-acyl complexes 11 via silyloxide elimination from the intermedate aldolate 10 (Table 3). This methodology has been the most commonly employed entry to the (Z)-isomer series. 

Table 3. Iron-Acyl Complexes 11 from CarbonyUr/ -acyclopentadienylHl-oxo -ftriinethylsilyllethyl] (triphenylphosphane)iron (8) by the Aldol Reaction with Aldehydes...

The aldol reaction of iron-acetyl enolates such as 1 with aldehydes creates a new stereogenic center at the (S-carbon of the product complexes. 

A powerful variation of the iron acetyl enolate aldol reaction utilizes the cnolate of complex 8 which bears a (pentafluorophenyl)diphenylphosphane ligand in place of the more usual triphenylphosphane47. The enolate species 9. prepared by treatment of 8 with lithium diiso-propylamide, reacts at — 78 °C with benzaldehyde to produce the aldol adduct 10 with a d.r. of 98.5 1.5. 

Conducting the aldol reaction at temperatures below —78 "C increases the diastereoselectivity, but at the cost of reduced yields45. Transmetalation of the lithium enolate 2 a by treatment with diethylaluminum chloride generated an enolate species that provided high yields of aldol products, however, the diastereoselectivity was as low as that of the lithium species45. Pre treatment of the lithium enolate 2a with tin(II) chloride, zinc(II) chloride, or boron trifluoridc suppressed the aldol reaction and the starting iron-acyl complex was recovered. 

The a-alkoxy iron-acyl complex 5 may be deprotonated to generate the lithium enolate 6, which undergoes a highly diastereoselective aldol reaction with acetone to generate the adduct 7 as the major product. Deprotonation of acetone by 6 is believed to be a competing reaction 30% of the starting complex 5 is found in the product mixture48 40. 

The achiral molybdenum enolate 2 reacts with benzophenone and benzaldehyde at —78 °C to yield the x,/i-unsaturated molybdenum-acyl complexes34, which presumably arise via elimination of hydroxide from unobserved aldolate intermediates such as 3. No examples of such aldol reactions with complexes that are chiral at molybdenum have been reported. 

The gold complex, generated in situ from bis(4-isocyanocyclohexyl)gold(I) tetrafluoroborate and (A)-A-methyl-,V-[2-(dialkylamino)ethyl]-l-[(5)-r,2-bis(diphenylphosphino)ferrocenyl]eth-ylamine, is an effective catalyst for the aldol reaction of various aldehydes with methyl iso-cyanoacetate to give the trans- and cw-4,5-dihydro-l,3-oxazoles. Depending on the aldehyde, the transjeis product ratio ranges from 84 16 to 100 0, and the ee of the main diastereomer is between 72 and 97%26. 

Another SBU with open metal sites is the tri-p-oxo carboxylate cluster (see Section 4.2.2 and Figure 4.2). The tri-p-oxo Fe " clusters in MIL-100 are able to catalyze Friedel-Crafts benzylation reactions [44]. The tri-p-oxo Cr " clusters of MIL-101 are active for the cyanosilylation of benzaldehyde. This reaction is a popular test reaction in the MOF Hterature as a probe for catalytic activity an example has already been given above for [Cu3(BTC)2] [15]. In fact, the very first demonstration of the catalytic potential of MOFs had aheady been given in 1994 for a two-dimensional Cd bipyridine lattice that catalyzes the cyanosilylation of aldehydes [56]. A continuation of this work in 2004 for reactions with imines showed that the hydrophobic surroundings of the framework enhance the reaction in comparison with homogeneous Cd(pyridine) complexes [57]. The activity of MIL-lOl(Cr) is much higher than that of the Cd lattices, but in subsequent reaction rans the activity decreases [58]. A MOF with two different types of open Mn sites with pores of 7 and 10 A catalyzes the cyanosilylation of aromatic aldehydes and ketones with a remarkable reactant shape selectivity. This MOF also catalyzes the more demanding Mukaiyama-aldol reaction [59]. 

Paterson, I., Florence, G.J., Gerlach, K., Scott, J.P., Sereinig, N. (2001) A Practical Synthesis of (-F)-Discodermolide and Analogues Fragment Union by Complex Aldol Reactions. Journal of the American Chemical Society, 123, 9535-9544. 

In 1991, Kobayashi el al. prepared novel chiral S/N ligands for the tin-mediated aldol reaction of silyl enol ethers with aldehydes. As an example, the reaction of benzaldehyde afforded the expected syn aldol product as the major product with a good yield and an enantioselectivity of up to 92% ee (Scheme 10.26). Moreover, other aldehydes such as substituted benzaldehydes or aliphatic unsaturated aldehydes were converted into their corresponding aldol products with enantioselectivities of more than 90% ee. It was checked that the corresponding diamine ligands provided less active complexes for the same reactions. 

Asymmetric Mukaiyama aldol reactions have also been performed in the presence of Lewis-acid lanthanoid complexes combined with a chiral sulfonamide ligand. Similar enantioselectivities of about 40% ee were obtained for all... 

The values of x = 0.5 and = 1 for the kinetic orders in acetone [1] and aldehyde [2] are not trae kinetic orders for this reaction. Rather, these values represent the power-law compromise for a catalytic reaction with a more complex catalytic rate law that corresponds to the proposed steady-state catalytic cycle shown in Scheme 50.3. In the generally accepted mechanism for the intermolecular direct aldol reaction, proline reacts with the ketone substrate to form an enamine, which then attacks the aldehyde substrate." A reaction exhibiting saturation kinetics in [1] and rate-limiting addition of [2] can show apparent power law kinetics with both x and y exhibiting orders between zero and one. 

The aldol reaction is also important in the synthesis of more complex molecules and in these cases control of both regiochemistry and stereochemistry is required. In most cases, this is accomplished under conditions of kinetic control. In the sections that follow, we discuss how variations of the basic mechanism and selection of specific reagents and reaction conditions can be used to control product structure and stereochemistry. 

The aldol reaction can be applied to dicarbonyl compounds in which the two groups are favorably disposed for intramolecular reaction. Kinetic studies on cyclization of 5-oxohexanal, 2,5-hexanedione, and 2,6-heptanedione indicate that formation of five-membered rings is thermodynamically somewhat more favorable than formation of six-membered rings, but that the latter is several thousand times faster.170 A catalytic amount of acid or base is frequently satisfactory for formation of five- and six-membered rings, but with more complex structures, the techniques required for directed aldol condensations are used. 

Lewis-Acid Catalyzed. Recently, various Lewis acids have been examined as catalyst for the aldol reaction. In the presence of complexes of zinc with aminoesters or aminoalcohols, the dehydration can be avoided and the aldol addition becomes essentially quantitative (Eq. 8.97).245 A microporous coordination polymer obtained by treating anthracene- is (resorcinol) with La(0/Pr)3 possesses catalytic activity for ketone enolization and aldol reactions in pure water at neutral pH.246 The La network is stable against hydrolysis and maintains microporosity and reversible substrate binding that mimicked an enzyme. Zn complexes of proline, lysine, and arginine were found to be efficient catalysts for the aldol addition of p-nitrobenzaldehyde and acetone in an aqueous medium to give quantitative yields and the enantiomeric excesses were up to 56% with 5 mol% of the catalysts at room temperature.247... 

This reaction sequence of conjugate reduction followed by aldol reaction is known as the reductive aldol reaction. In certain instances, reductive elimination from the M-TM-enolate species may occur to furnish M-enolate, which itself may participate in the aldol reaction (Scheme 3). This detour may be described as the background path or stepwise path in one-pot. Indeed, it has been reported that certain cationic Rh complexes such as [Rh(COD)(DPPB)] (COD = 1,5-cyclooctadiene, DPPB = diphenylphosphinobutane) catalyze the aldol reactions of silyl enol ethers and carbonyl compounds by serving as Lewis acids [5-8]. 

After the initial two reports of Rh- and Co-catalyzed reductive aldol couplings, further studies did not appear in the literature until the late 1990s. Beyond 1998, several stereoselective and enantioselective reductive aldol reactions were developed, which are catalyzed by a remarkably diverse range of metal complexes, including those based upon Pd, Cu, Ir, and In. In this chapter, transition metal-catalyzed aldol, Michael, and Mannich reactions that proceed via transition metal hydride-promoted conjugate reduction are reviewed. 

The intramolecular reductive aldol reaction of keto-enones was successfully conducted under conditions similar to those described above, employing a cationic Rh complex and PI13P (Scheme 20) [34]. The keto-enone 63 was cyclized in the presence of added K2CO3 to give the ketone-aldol 64 in 72% yield with exclusive ds-selectivity. Dione-enone derivatives, for example 68 and 70, were efficiently cyclized to furnish bicyclic aldol products 69 and 71, respectively, wherein three stereogenic centers of the bicyclic product form stereoselectivity through the intermediacy of a Rh-enolate. 

Riant et al. in 2006 reported an enantioselective reductive aldol reaction of acetophenone and methyl acrylate mediated by PhSiH3 (140 mol %) and catalyzed by a complex generated in situ from [CuF(Ph3P)3]2MeOH (1-3 mol %) and a chiral bisphosphine (1-3 mol %) [57]. According to Mori s... 

---