Adsorption surface structures

Primary surface information composition, heat of adsorption, surface structure. 

Fig. VIII-9. Alteration of the structure of a Ni(llO) surface by H-atom adsorption (a) structure for 0 = 1 (b) structure for 0 > 1. [Reprinted with permission from G. Ertl, Langmuir, 3, 4 (1987). Copyright 1987, American Chemical Society.]...

Many solids have foreign atoms or molecular groupings on their surfaces that are so tightly held that they do not really enter into adsorption-desorption equilibrium and so can be regarded as part of the surface structure. The partial surface oxidation of carbon blacks has been mentioned as having an important influence on their adsorptive behavior (Section X-3A) depending on conditions, the oxidized surface may be acidic or basic (see Ref. 61), and the surface pattern of the carbon rings may be affected [62]. As one other example, the chemical nature of the acidic sites of silica-alumina catalysts has been a subject of much discussion. The main question has been whether the sites represented Brpnsted (proton donor) or Lewis (electron-acceptor) acids. Hall... 

Some fascinating effects occur in the case of CO on Pt(lOO). As illustrated in Fig. XVI-8, the clean surface is reconstructed naturally into a quasi-hexag-onal pattern, but on adsorption of CO, this reconstruction is lifted to give the bulk termination structure of (110) planes [56]. As discussed in Section XVIII-9E very complicated changes in surface structure occur on the oxidation of CO... 

Tochihara H and Mizuno S 1998 Composite surface structures formed by restructuring-type adsorption of alkali-metals on FCC metals Prog. Surf. Sc/. 58 1... 

The major role of TOF-SARS and SARIS is as surface structure analysis teclmiques which are capable of probing the positions of all elements with an accuracy of <0.1 A. They are sensitive to short-range order, i.e. individual interatomic spacings that are <10 A. They provide a direct measure of the interatomic distances in the first and subsurface layers and a measure of surface periodicity in real space. One of its most important applications is the direct determination of hydrogen adsorption sites by recoiling spectrometry [12, 4T ]. Most other surface structure teclmiques do not detect hydrogen, with the possible exception of He atom scattering and vibrational spectroscopy. 

When the film thickens beyond two or three molecular layers, the effect of surface structure is largely smoothed out. It should therefore be possible, as Hill and Halsey have argued, to analyse the isotherm in the multilayer region by reference to surface forces (Chapter 1), the partial molar entropy of the adsorbed film being taken as equal to that of the liquid adsorptive. By application of the 6-12 relation of Chapter 1 (with omission of the r" term as being negligible except at short distances) Hill was able to arrive at the isotherm equation... 

Adsorbents Table 16-3 classifies common adsorbents by structure type and water adsorption characteristics. Structured adsorbents take advantage of their crystalline structure (zeolites and sllicalite) and/or their molecular sieving properties. The hydrophobic (nonpolar surface) or hydrophihc (polar surface) character may vary depending on the competing adsorbate. A large number of zeolites have been identified, and these include both synthetic and naturally occurring (e.g., mordenite and chabazite) varieties. 

Surface SHG [4.307] produces frequency-doubled radiation from a single pulsed laser beam. Intensity, polarization dependence, and rotational anisotropy of the SHG provide information about the surface concentration and orientation of adsorbed molecules and on the symmetry of surface structures. SHG has been successfully used for analysis of adsorption kinetics and ordering effects at surfaces and interfaces, reconstruction of solid surfaces and other surface phase transitions, and potential-induced phenomena at electrode surfaces. For example, orientation measurements were used to probe the intermolecular structure at air-methanol, air-water, and alkane-water interfaces and within mono- and multilayer molecular films. Time-resolved investigations have revealed the orientational dynamics at liquid-liquid, liquid-solid, liquid-air, and air-solid interfaces [4.307]. 

In the systems characterized by more complex surface structure, consisting of patches of different size and different magnitude of the boundary field, the properties of adsorption isotherms have been found to depend on the... 

Most microscopic theories of adsorption and desorption are based on the lattice gas model. One assumes that the surface of a sohd can be divided into two-dimensional cells, labelled i, for which one introduces microscopic variables Hi = 1 or 0, depending on whether cell i is occupied by an adsorbed gas particle or not. (The connection with magnetic systems is made by a transformation to spin variables cr, = 2n, — 1.) In its simplest form a lattice gas model is restricted to the submonolayer regime and to gas-solid systems in which the surface structure and the adsorption sites do not change as a function of coverage. To introduce the dynamics of the system one writes down a model Hamiltonian which, for the simplest system of a one-component adsorbate with one adsorption site per unit cell, is... 

The terms proportional to and describe adsorption on, and desorption from, the reconstructed and unreconstructed surfaces, respectively, without a simultaneous change in the surface structure. The term with accounts for the spontaneous reconstruction and the spontaneous lifting of the reconstruction in the absence of an adsorbate. The expressions with w r and Wsu give the rates of adsorption and desorption with concurrent reconstruction or lifting of the reconstruction. Finally, the terms proportional to... 

The very new techniques of scanning tunnelling microscopy (STM) and atomic force microscopy (AFM) have yet to establish themselves in the field of corrosion science. These techniques are capable of revealing surface structure to atomic resolution, and are totally undamaging to the surface. They can be used in principle in any environment in situ, even under polarization within an electrolyte. Their application to date has been chiefly to clean metal surfaces and surfaces carrying single monolayers of adsorbed material, rendering examination of the adsorption of inhibitors possible. They will indubitably find use in passive film analysis. 

The physicochemical properties of carbon are highly dependent on its surface structure and chemical composition [66—68], The type and content of surface species, particle shape and size, pore-size distribution, BET surface area and pore-opening are of critical importance in the use of carbons as anode material. These properties have a major influence on (9IR, reversible capacity <2R, and the rate capability and safety of the battery. The surface chemical composition depends on the raw materials (carbon precursors), the production process, and the history of the carbon. Surface groups containing H, O, S, N, P, halogens, and other elements have been identified on carbon blacks [66, 67]. There is also ash on the surface of carbon and this typically contains Ca, Si, Fe, Al, and V. Ash and acidic oxides enhance the adsorption of the more polar compounds and electrolytes [66]. 

Section 8 deals with reactions which occur at gas—solid and solid—solid interfaces, other than the degradation of solid polymers which has already been reviewed in Volume 14A. Reaction at the liquid—solid interface (and corrosion), involving electrochemical processes outside the coverage of this series, are not considered. With respect to chemical processes at gas-solid interfaces, it has been necessary to discuss surface structure and adsorption as a lead-in to the consideration of the kinetics and mechanism of catalytic reactions. 

For a metal/solution interface, the pcz is as informative as the electron work function is for a metal/vacuum interface.6,15 It is a property of the nature of the metal and of its surface structure (see later discussion) it is sensitive to the presence of impurities. Its value can be used to check the cleanliness and perfection of a metal surface. Its position determines the potential ranges of ionic and nonionic adsorption, and the region where double-layer effects are possible in electrode kinetics.8,10,16... 

The specific adsorption of OH" ions depends on the electrode surface structure increasing in the order Au(l 11) < Au(100) < Au(311).391 The similarity of the results obtained in alkaline solutions and those observed in acid and neutral media have led the authors of many papers to conclude that surface reconstruction occurs at a < 0 and is removed at 0. 

Using impedance data of TBN+ adsorption and back-integration,259,588 a more reliable value of <7 0 was found for a pc-Cu electrode574,576 (Table 11). Therefore, differences between the various EffM) values are caused by the different chemical states and surface structures of pc-Cu electrodes prepared by different methods (electrochemical or chemical polishing, mechanical cutting). Naumov etal,585 have observed these differences in the pzc of electroplated Cu films prepared in different ways. 

Clavilier eta/.196,794-796have studied CO adsorption on electrochemi-cally faceted Pt(lll) and Pt(110) electrodes and from the charge transients, with the provision that the CO dipole has a negligible contribution to the electrical double-layer potential these authors have provided a definite determination of ( =o- However, electrochemically faceted Pt(lll) electrodes have a polycrystalline surface structure, and thus the value of Eq-q for such electrodes lies between fiULO for terraces and forst s.197 786 787... 

Plonski, I.-H. Effects of Surface Structure and Adsorption Phenomena on the Active Dissolution of Iron in Acid Media 29... 

In this figure, the activation energies of N2 dissociation are compared for the different reaction centers the (111) surface structure ofan fee crystal and a stepped surface. Activation energies with respect to the energy of the gas-phase molecule are related to the adsorption energies of the N atoms. As often found for bond activating surface reactions, a value of a close to 1 is obtained. It implies that the electronic interactions between the surface and the reactant in the transition state and product state are similar. The bond strength of the chemical bond... 

The methods for depositing chlorine adatoms on the (110) surface have been described previously (26), and resulted in surface structures and LEED patterns identical to those achieved by dissociative CI2 adsorption. A c(4x2)-Cl pattern at 6 , = 0.75 (26) was used to calibrate chlorine coverages, which were taken proportional to the ratio of Cl Ag AES intensities (26). 

---