Acrylics free-radical polymerization

Methyl acrylate Free radical polymerization similar to the above —CHr-CH— ( OOCHs 0 Amorphous, even when stretched. Soft, rubbery if molecular weight is high. Readily soluble... 

Statistical (random) ABBABABAAABBABAABBAABA Methyl methacrylate, butyl acrylate Free-radical polymerization Ftoly(methyl methacrylate-sfaf-butyl acrylate)... 

Scope for Accessing the Chain Length Dependence of the Termination Rate Coefficient for Disparate Length Radicals in Acrylate Free Radical Polymerization... 

Further investigations in the mechanistic details of the RAFT process, particularly the potential side reactions of the intermediate radical species, were made using the coupled SEC/ESI-MS to map the product spectrum of a series of acrylate free-radical polymerizations mediated via the RAFT [61]. The mass spectroscopic results were compared to modeling estimations made to predict the concentrations of termination products of the intermediate species in comparison to polymeric material generated by recombination of two propagating macroradicals. 

Feldermann, Ah Toy A, Davis TP, Stenzel MH, Bamer-Kowollik C. An in-depth analytical approach to the mechanism of the RAFT process in acrylate free radical polymerizations via coupled size exclusion chromatography-electrospray ionization mass spectrometry (SEC-ESI-MS). Polymer 2005 46 8448-8457. 

Sato E, Emoto T, Zetterlund PB, Yamada B. Influence of mid-chain radicals on acrylate free radical polymerization effect of ester alkyl group. Macromol Chem Phys 2004 205 1829-1839. 

These materials are obtained through free-radical polymerization of acrylic or methacrylic monomers, or of fumarates. 

Poly (methyl Acrylate). The monomer used for preparing poly(methyl acrylate) is produced by the oxidation of propylene. The resin is made by free-radical polymerization initiated by peroxide or azo catalysts and has the following formula ... 

The free-radical polymerization of acrylic monomers follows a classical chain mechanism in which the chain-propagation step entails the head-to-tail growth of the polymeric free radical by attack on the double bond of the monomer. 

Despite numerous efforts, there is no generally accepted theory explaining the causes of stereoregulation in acryflc and methacryflc anionic polymerizations. Complex formation with the cation of the initiator (146) and enoflzation of the active chain end are among the more popular hypotheses (147). Unlike free-radical polymerizations, copolymerizations between acrylates and methacrylates are not observed in anionic polymerizations however, good copolymerizations within each class are reported (148). 

Acrylamide—acrylic polymers are made by free-radical polymerization of monomers containing the acryHc stmcture, where R is —H or —CH and is —NH2 or a substituted amide or the alkoxy group of an ester. 

A second type of uv curing chemistry is used, employing cationic curing as opposed to free-radical polymerization. This technology uses vinyl ethers and epoxy resins for the oligomers, reactive resins, and monomers. The initiators form Lewis acids upon absorption of the uv energy and the acid causes cationic polymerization. Although this chemistry has improved adhesion and flexibility and offers lower viscosity compared to the typical acrylate system, the cationic chemistry is very sensitive to humidity conditions and amine contamination. Both chemistries are used commercially. 

Polymerization of methacrylates is also possible via what is known as group-transfer polymerization. Although only limited commercial use has been made of this technique, it does provide a route to block copolymers that is not available from ordinary free-radical polymerizations. In a prototypical group-transfer polymerization the fluoride-ion-catalyzed reaction of a methacrylate (or acrylate) in the presence of a silyl ketene acetal gives a high molecular weight polymer (45—50). 

Treatment of 2-methylthiirane with t-butyl hydroperoxide at 150 °C in a sealed vessel gave very low yields of allyl disulfide, 2-propenethiol and thioacetone. The allyl derivatives may be derived from abstraction of a hydrogen atom from the methyl group followed by ring opening to the allylthio radical. Percarbonate derivatives of 2-hydroxymethylthiirane decompose via a free radical pathway to tar. Acrylate esters of 2-hydroxymethylthiirane undergo free radical polymerization through the double bond. 

The generation of free radicals usually does not immediately start polymerization in commercial adhesives. These contain small amounts of inhibitors, which are chemical compounds that prevent free radical polymerization. Inhibitors are purposely added to acrylic adhesives to obtain practical shelf life. Inhibitors stop polymerization by reacting with active free radicals to form a less reactive species... 

Mixtures of monomers can be used to balance properties. This is possible due to the ease of copolymer formation via free-radical polymerization. The glass transition temperature of acrylic copolymers can be predicted from the weight fraction of the component monomers and the glass transition temperatures of the respective homopolymers [20]. Eq. 3 (commonly known as the Fox equation) is reported ... 

Acrylic esters can be polymerized by a number of routes. Anionic polymerization gives the narrow standards used primarily for calibration, but is not used on an industrial/commercial scale. Free-radical polymerization is the dominant mode of polymerization for making these polymers on an industrial scale. Significant volumes of polymer are made by both solution polymerization... 

Free radical polymerization is a key method used by the polymer industry to produce a wide range of polymers [37]. It is used for the addition polymerization of vinyl monomers including styrene, vinyl acetate, tetrafluoroethylene, methacrylates, acrylates, (meth)acrylonitrile, (meth)acrylamides, etc. in bulk, solution, and aqueous processes. The chemistry is easy to exploit and is tolerant to many functional groups and impurities. 

Monomers of the acrylic series exhibit high reactivity in free-radical polymerization, many of them being capable of forming sufficiently hydrophilic polymers. For this reason various acrylates form the principal monomeric basis of hydrogels. 

Cobalt porphyrin complexes are involved in the chain transfer catalysis of the free-radical polymerization of acrylates. Chain transfer catalysis occurs by abstraction of a hydrogen atom from a grow ing polymer radical, in this case by Co(Por) to form Co(Por)H. The hydrogen atom is then transferred to a new monomer, which then initiates a new propagating polymer chain. The reaction steps are shown in Eqs. 12 (where R is the polymer chain. X is CN), (13), and (14)." ... 

Yin et al. [73,74] prepared new microgel star amphiphiles and stndied the compression behavior at the air-water interface. Particles were prepared in a two-step process. First, the gel core was synthesized by copolymerization of styrene and divinylbenzene in diox-ane using benzoylperoxide as initiator. Microgel particles 20 run in diameter were obtained. Second, the gel core was grafted with acrylic or methacryUc acid by free radical polymerization, resulting in amphiphilic polymer particles. These particles were spread from a dimethylformamide/chloroform (1 4) solution at the air-water interface. tt-A cnrves indicated low compressibility above lOmNm and collapse pressnres larger than 40 mNm With increase of the hydrophilic component, the molecnlar area of the polymer and the collapse pressure increased. 

The most common poly(alkenoic acid) used in polyalkenoate, ionomer or polycarboxylate cements is poly(acrylic acid), PAA. In addition, copolymers of acrylic acid with other alkenoic acids - maleic and itaconic and 3-butene 1,2,3-tricarboxylic acid - may be employed (Crisp Wilson, 1974c, 1977 Crisp et al, 1980). These polyacids are prepared by free-radical polymerization in aqueous solution using ammonium persulphate as the initiator and propan-2-ol (isopropyl alcohol) as the chain transfer agent (Smith, 1969). The concentration of poly(alkenoic add) is kept below 25 % to avoid the danger of explosion. After polymerization the solution is concentrated to 40-50 % for use. 

Lignin, brown coal polymer of methacrylic acid, methacrylamide, hydroxyethyl acrylate, hydroxypropyl acrylate, vinyl acetate, methyl vinyl ether, ethyl vinyl ether, N-methylmeth-acrylamide, N,N-dimethylmethacrylamide, vinyl sulfonate, or 2-acrylamido-N-methylpropane sulfonic acid free radical polymerization of a water-soluble vinyl monomer in an aqueous suspension of coals [705,1847]... 

Polymerization employing Co complexes as catalysts or else polymers incorporating functionality that includes Co ions represent aspects of polymerization reactions of interest here. Cobalt-mediated free-radical polymerization of acrylic monomers has been reviewed.55 Co11 porphyrins act as traps for dialkylcyanomethyl radicals.1098 Alkyl complexes of Co(TMesP)... 

We make polyethylene resins using two basic types of chain growth reaction free radical polymerization and coordination catalysis. We use free radical polymerization to make low density polyethylene, ethylene-vinyl ester copolymers, and the ethylene-acrylic acid copolymer precursors for ethylene ionomers. We employ coordination catalysts to make high density polyethylene, linear low density polyethylene, and very low density polyethylene. 

Our acrylic polymerization model was developed to meet the need for solving these problems. Kinetics used are based on fairly well accepted and standard free radical polymerization mechanisms. 

The tacky polymeric microspheres that comprise the pressure-sensitive adhesive layers of repositionable notes are patented inventions. One such material (U.S. Patent 5,714,237) is prepared by a free-radical polymerization reaction of isooctyl acrylate (Fig. 14.3.1) in the presence of polyacrylic acid with a chain-... 

Figure 14.3.1 The molecular structure of isooctyl acrylate, a monomer in a free-radical polymerization reaction.

---