Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Acrylic resin, general-purpose

Acrylic Resin Acrylic/PVC Alloy Cellulose Acetate Butyrate General Purpose Polystyrene LDPE PES... [Pg.972]

Acrylic Resin Cellulose Acetate General Purpose Polystyrene Impact Polystyrene Polyester - PET... [Pg.1013]

The choice of binders for the topcoat depends on the end use of the coil-coated metals. Acrylic topcoats were developed earliest, and are widely used indoors for surfaces that are not exposed to water, chemicals, or mechanical stress. Polyester coil coatings provide a good general-purpose finish, and can be used for a wide range of applications (e.g., car interiors and accessories, caravan exteriors, domestic appliances). Tough, abrasion-resistant, and durable general-purpose finishes can be formulated with polyurethane and polyester resins in combination. [Pg.259]

Figure 7.75 Tensile modulus vs. temperature for general-purpose acrylic resin. Figure 7.75 Tensile modulus vs. temperature for general-purpose acrylic resin.
Figure 7.78 Charpy impact strength of Evonik Industries Plexiglas 7N—general-purpose extrusion grade acrylic resin vs. percentage of Plexiglas zkBR additives. Figure 7.78 Charpy impact strength of Evonik Industries Plexiglas 7N—general-purpose extrusion grade acrylic resin vs. percentage of Plexiglas zkBR additives.
Figure 7.80 Charpy impact strength vs. temperature for Lucite International Diakon CMG302 general-purpose high heat acrylic resin [7]. Figure 7.80 Charpy impact strength vs. temperature for Lucite International Diakon CMG302 general-purpose high heat acrylic resin [7].
Figure 7.81 Specific volume as a function of temperature and pressure (PVT) for Evonik Industries Plexiglas 7N— general-purpose extrusion grade acrylic resin. Figure 7.81 Specific volume as a function of temperature and pressure (PVT) for Evonik Industries Plexiglas 7N— general-purpose extrusion grade acrylic resin.
A typical composition for BMC and SMC includes base resins, catalysts, peroxides accelerators, fillers/chopped GF, thickeners and other additives. The base resins that are usually used are either polyester-based (orthophthalic or isophthalic), which are used with styrene, acrylic, vinyl toluene or di-allyl-phthalate (DAP) monomers, as crosslinkers, or styrene type monomers for general purpose products. Acrylic base resins are used for low shrinkage, while vinyl type monomers for high hot strengths (heat deflection temperatures). Catalysts are used for polyester type resins. Peroxides, such as benzoyl peroxide (BPO) and butyl perbenzoate are used as high temperature catalysts. [Pg.339]

Acrylics Cast, Molded, Extruded Cast Resin Sheets, Rods General purpose, type I General purpose, type II 1.17— 1.19 1.18— 1.20... [Pg.115]

Acrylics Cast Resin Sheets, Rods General purpose, type I 0.35... [Pg.959]

Acrylics Cast Resin Sheets, Rods General Purpose, Type 1 Acrylics Cast Resin Sheets, Rods General Purpose, Type 11 Polyvinyl Chloride Copolymers Molded, Extruded Nonrigid—general Phenolics Molded General Woodflour Flock Filled 0.05—0.06 0.05—0.06 0.05—0.15 0.05—0.30... [Pg.1360]

See other pages where Acrylic resin, general-purpose is mentioned: [Pg.75]    [Pg.75]    [Pg.643]    [Pg.221]    [Pg.977]    [Pg.170]    [Pg.83]    [Pg.719]    [Pg.913]    [Pg.913]    [Pg.15]    [Pg.194]   
See also in sourсe #XX -- [ Pg.368 ]



SEARCH



Acrylate resin

Acrylates Acrylic resins

Acrylic resins

© 2024 chempedia.info