Acid chlorides alkenes

Acyl halides are intermediates of the carbonylations of alkenes and organic-halides. Decarbonylation of acyl halides as a reversible process of the carbo-nylation is possible with Pd catalyst. The decarbonylation of aliphatic acid chlorides proceeds with Pd(0) catalyst, such as Pd on carbon or PdC, at around 200 °C[109,753]. The product is a mixture of isomeric internal alkenes. For example, when decanoyl chloride is heated with PdCF at 200 C in a distillation flask, rapid evolution of CO and HCl stops after I h, during which time a mixture of nonene isomers was distilled off in a high yield. The decarbonylation of phenylpropionyl chloride (883) affords styrene (53%). In addition, l,5-diphenyl-l-penten-3-one (884) is obtained as a byproduct (10%). formed by the insertion of styrene into the acyl chloride. Formation of the latter supports the formation of acylpalladium species as an intermediate of the decarbonylation. Decarbonylation of the benzoyl chloride 885 can be carried out in good yields at 360 with Pd on carbon as a catalyst, yielding the aryl chloride 886[754]. 

The acylpalladium complex formed from acyl halides undergoes intramolecular alkene insertion. 2,5-Hexadienoyl chloride (894) is converted into phenol in its attempted Rosenmund reduction[759]. The reaction is explained by the oxidative addition, intramolecular alkene insertion to generate 895, and / -elimination. Chloroformate will be a useful compound for the preparation of a, /3-unsaturated esters if its oxidative addition and alkene insertion are possible. An intramolecular version is known, namely homoallylic chloroformates are converted into a-methylene-7-butyrolactones in moderate yields[760]. As another example, the homoallylic chloroformamide 896 is converted into the q-methylene- -butyrolactams 897 and 898[761]. An intermolecular version of alkene insertion into acyl chlorides is known only with bridgehead acid chlorides. Adamantanecarbonyl chloride (899) reacts with acrylonitrile to give the unsaturated ketone 900[762],... 

Peroxomonosulfuric acid oxidi2es cyanide to cyanate, chloride to chlorine, and sulfide to sulfate (60). It readily oxidi2es carboxyflc acids, alcohols, alkenes, ketones, aromatic aldehydes, phenols, and hydroquiaone (61). Peroxomonosulfuric acid hydroly2es rapidly at pH <2 to hydrogen peroxide and sulfuric acid. It is usually made and used ia the form of Caro s acid. 

The chemical inertness of the three-membered ring permitted many conversions of functional groups in diazirines. Esterifications, cleavage of esters and acetals, synthesis of acid chlorides, oxidation of hydroxy groups to carboxyl groups as well as Hofmann alkenation all left the three-membered ring intact (79AHC(24)63). 

Many of the reactions of amines are familiar from past chapters. Thus, amines react with alkyl halides in S 2 reactions and with acid chlorides in nucleophilic acyl substitution reactions. Amines also undergo E2 elimination to yield alkenes if they are first qualernized by treatment with iodomethane and then heated with silver oxide, a process called the Hofmann elimination. 

DNA sequencing and. 1113 Electrospray ionization (ESI) mass spectrometry, 417-418 Electrostatic potential map, 37 acetaldehyde, 688 acetamide, 791,922 acetate ion. 43. 53, 56, 757 acetic acid. 53. 55 acetic acid dimer, 755 acetic anhydride, 791 acetone, 55, 56. 78 acetone anion, 56 acetyl azide, 830 acetyl chloride, 791 acetylene. 262 acetylide anion, 271 acid anhydride, 791 acid chloride, 791 acyl cation, 558 adenine, 1104 alanine, 1017 alanine zwitterion, 1017 alcohol. 75 alkene, 74, 147 alkyl halide, 75 alkyne. 74... 

Infrared radiation, electromagnetic spectrum and, 419, 422 energy of. 422 frequencies of, 422 wavelengths of, 422 Infrared spectroscopy, 422-431 acid anhydrides, 822-823 acid chlorides, 822-823 alcohols. 428, 632-633 aldehydes, 428. 730-731 alkanes, 426-427 alkenes, 427 alkynes, 427 amides. 822-823 amines, 428, 952 ammonium salts, 952-953 aromatic compound, 427-428, 534 bond stretching in, 422... 

Rearrangement reaction, 138 Reducing sugar, 992 Reduction, 229. 348 acid chlorides, 804 aldehydes, 609-610. 709 aldoses, 992 alkene, 229-232 alkyne, 268-270 amides, 815-816 arenediazonium salt, 943 aromatic compounds and, 579-580... 

Recently, Oshima et al. developed the conversion of acid chlorides into the corresponding homoallylic alcohols catalyzed by in r(/ -prepared hydridozirconium allyl reagents (Scheme 41),147 147a The proposed mechanism suggests an initial hydride transfer from the zirconocene crotyl hydride species, in equlibrium with its Cp2Zr(l-alkene),147a to the acid chloride with subsequent allylation to afford the corresponding homoallylic alcohols. 

Oxidation is the first step for producing molecules with a very wide range of functional groups because oxygenated compounds are precursors to many other products. For example, alcohols may be converted to ethers, esters, alkenes, and, via nucleophilic substitution, to halogenated or amine products. Ketones and aldehydes may be used in condensation reactions to form new C-C double bonds, epoxides may be ring opened to form diols and polymers, and, finally, carboxylic acids are routinely converted to esters, amides, acid chlorides and acid anhydrides. Oxidation reactions are some of the largest scale industrial processes in synthetic chemistry, and the production of alcohols, ketones, aldehydes, epoxides and carboxylic acids is performed on a mammoth scale. For example, world production of ethylene oxide is estimated at 58 million tonnes, 2 million tonnes of adipic acid are made, mainly as a precursor in the synthesis of nylons, and 8 million tonnes of terephthalic acid are produced each year, mainly for the production of polyethylene terephthalate) [1]. 

Other polymerisation incidents are f Acrylaldehyde, 1145 Acrylamide, 1180 Acrylic acid, 1148 Acrylic acid, Initiator, Water, 1148 f Acrylonitrile, 1107 f Acrylonitrile, Initiators, 1107 f Acrylonitrile, Silver nitrate, 1107 f Acryloyl chloride, 1093 Allyl 4-toluenesulfonate, 3315 Aluminium chloride, Alkenes, 0062 3 - Aminopropiononitrile f Aziridine, Acids, 0863... 

In an extension of this work, the reuse of the polymeric catalyst was addressed and several new PE-poly(alkene) glycol copolymers were prepared [68]. Commercially available oxidized polyethylene (CO2H terminated, both high and low molecular weight) was converted to the acid chloride and reacted with Jeffamine D or Jeffamine EDR, and subsequently converted to the tributylammonium bromide salt with butyl bromide. These new quaternary salts were shown to catalyze the nucleophihc substitution of 1,6-dibromohexane with sodium cyanide or sodium iodide. While none of the polymeric quaternary salts catalyzed the reaction as well as tetrabutylammonium bromide, the temperature-dependent solubility of the polymers allowed removal of the polymer by simple filtration. 

The order of reactivities of various functional groups determined under standard conditions (using externally generated diborane, and tetrahydrofuran as solvent) is acid > alkene > ketone > nitrile > epoxide > ester > acid chloride.33 Acids, aldehydes, ketones, epoxides, nitriles, lactones and azo compounds are reduced rapidly, esters more slowly and chloral, acid chlorides and nitro compounds are inert. Double bonds undergo the hydroboration reaction,25 nitriles and azo compounds are reduced to amines, and the remaining groups to alcohols. Ketones can be reduced selectively in the presence of epoxides. Contrary to the order of reactivities given above, it has been claimed that nitriles are reduced more rapidly than ketones.223... 

Experimentally, it is preferable to add the alkene to the acylating agent under Friedel-Crafts conditions. Successful acylation is accomplished with both acid chlorides and anhydrides, though yields are higher with aliphatic rather than aromatic acid derivatives (61JCS3553). 

From acid chlorides and alcohols RCOCI + R OH — RC02R + HCi Versatile reaction works well with prim., sec., and tert. alcohols a base may be necessary to remove HCI, because tert-aliphatic alcohols may give alkenes and fert-butyl chlorides. 

Scheme 44 summarizes an addition reaction by the Barton method. Thiohydroxamate esters (32) are readily prepared and isolated, but, more typically, they are generated in situ. Experimental procedures have been described in detail148151 and often entail the slow addition of an acid chloride to a refluxing chlorobenzene solution of the readily available sodium salt (31), dimethylaminopyridine (DMAP, to catalyze the esterification), and excess alkene. The products are usually isolated by standard aqueous work-up and chromatographic purification. 

---