Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Acetaldehyde aldolization

The simplest possible aldehyde donor, acetaldehyde, can also be used as the donor Very recently, Hayashi and coworkers discovered how to use acetaldehyde in crossed-aldol reactions - the trick is to use diarylprohnol as the catalyst and to optimize the reaction conditions carefully to prevent oligomerization of acetaldehyde. However, so far the acetaldehyde aldol reactions appear to be limited to aromatic aldehyde acceptors [205],... [Pg.50]

In tile industrial production of higher alcohols (above butyls), aldehydes play the role of an intermediate in a complete process that involves aldol condensation and hydrogenation. In the OXO process, olefins are catalytically converted into aldehydes that contain one more carbon titan the olefin in the feedstock. Aldehydes also serve as starting materials in the synthesis of several amino acids. See also Acetaldehyde Aldol Condensation Benzaldehyde and Furfuraldehyde. [Pg.48]

This compound, as distinguished from paraldehyde and metaldehyde, is a true aldehyde, in that it cannot be converted back to acetaldehyde. Aldol loses water easily, and is converted into an unsaturated aldehyde ... [Pg.150]

Butyl alcohol can be made from 2 molecules of ethylene via acetaldehyde, aldol, and crotonaldehyde. One lb butyl alcohol requires 1.1 lb ethylene. Alternatively, propylene can react with carbon monoxide and hydrogen to give a 4 1 mixture of n-butyl alcohol and isobutyl alcohol. One lb of alcohol requires 0.58 lb propylene. [Pg.345]

It should be realized that the nucleophilic enolic intermediate (hydroxy-ethyl-thiamine pyrophosphate) is a form in which much of the coenzyme is found in vivo and can react with other electrophiles such as a molecule of acetaldehyde (aldol condensation) ... [Pg.451]

When a mixture of aniline, hydrochloric acid and acetaldehyde is heated (in the absence of an oxidising agent), a vigorous reaction occurs with the pro duction of quinaldine. In these circumstances, the main reactions are undoubtedly, (i) the acetaldehyde undergoes the aldol condensation, and the... [Pg.300]

Acetaldehyde (and other aldehydes containing at least one hydrogen atom in the a position) when treated with a small quantity of dilute sodium hydr oxide solution or other basic catalyst gives a good yield of aldol (p hydroxy-n-but3Taldehyde) (I), which readily loses water, either by heating the isolated aldol alone or with a trace of mineral acid, to form crotonaldehyde (II) ... [Pg.351]

With concentrated alkali, a resin is formed from repeated aldol condensations between aldol, crotonaldehyde and acetaldehyde. A similar condensation occurs with acetone (b.p. 56°), but the equilibrium mixture contains only a few per cent, of diacetone alcohol (III), b.p. 166° ... [Pg.352]

Acetaldehyde condenses in the presence of a little sodium sulphite or sodium hydroxide solution to aldol. The latter ehminates water upon distUlation at atmospheric pressure, but more efficiently in the presence of a trace of iodine, which acts as a catalyst, to yield crotonaldehyde ... [Pg.460]

The selective intermolecular addition of two different ketones or aldehydes can sometimes be achieved without protection of the enol, because different carbonyl compounds behave differently. For example, attempts to condense acetaldehyde with benzophenone fail. Only self-condensation of acetaldehyde is observed, because the carbonyl group of benzophenone is not sufficiently electrophilic. With acetone instead of benzophenone only fi-hydroxyketones are formed in good yield, if the aldehyde is slowly added to the basic ketone solution. Aldols are not produced. This result can be generalized in the following way aldehydes have more reactive carbonyl groups than ketones, but enolates from ketones have a more nucleophilic carbon atom than enolates from aldehydes (G. Wittig, 1968). [Pg.56]

Mixed aldol condensations can be effective only if we limit the number of reaction pos sibilities It would not be useful for example to treat a solution of acetaldehyde and propanal with base A mixture of four aldol addition products forms under these condi tions Two of the products are those of self addition... [Pg.774]

The base-catalyzed reaction of acetaldehyde with excess formaldehyde [50-00-0] is the commercial route to pentaerythritol [115-77-5]. The aldol condensation of three moles of formaldehyde with one mole of acetaldehyde is foUowed by a crossed Cannizzaro reaction between pentaerythrose, the intermediate product, and formaldehyde to give pentaerythritol (57). The process proceeds to completion without isolation of the intermediate. Pentaerythrose [3818-32-4] has also been made by condensing acetaldehyde and formaldehyde at 45°C using magnesium oxide as a catalyst (58). The vapor-phase reaction of acetaldehyde and formaldehyde at 475°C over a catalyst composed of lanthanum oxide on siHca gel gives acrolein [107-02-8] (59). [Pg.50]

Mercaptals, CH2CH(SR)2, are formed in a like manner by the addition of mercaptans. The formation of acetals by noncatalytic vapor-phase reactions of acetaldehyde and various alcohols at 35°C has been reported (67). Butadiene [106-99-0] can be made by the reaction of acetaldehyde and ethyl alcohol at temperatures above 300°C over a tantala—siUca catalyst (68). Aldol and crotonaldehyde are beheved to be intermediates. Butyl acetate [123-86-4] has been prepared by the catalytic reaction of acetaldehyde with 1-butanol [71-36-3] at 300°C (69). [Pg.51]

Reaction of one mole of acetaldehyde and excess phenol in the presence of a mineral acid catalyst gives l,l-bis(p-hydroxyphenyl)ethane [2081-08-5], acid catalysts, acetaldehyde, and three moles or less of phenol yield soluble resins. Hardenable resins are difficult to produce by alkaline condensation of acetaldehyde and phenol because the acetaldehyde tends to undergo aldol condensation and self-resinification (see Phenolic resins). [Pg.51]

The -butyraldehyde may be obtained from acetaldehyde [75-07-0] by aldol addition followed by hydrogenation, or from propylene by the 0x0 process. This latter process is predominantly favored (Eig. 7). [Pg.459]

Pentaerythritol is produced by reaction of formaldehyde [50-00-0] and acetaldehyde [75-07-0] in the presence of a basic catalyst, generally an alkah or alkaline-earth hydroxide. Reaction proceeds by aldol addition to the carbon adjacent to the hydroxyl on the acetaldehyde. The pentaerythrose [3818-32-4] so produced is converted to pentaerythritol by a crossed Cannizzaro reaction using formaldehyde. All reaction steps are reversible except the last, which allows completion of the reaction and high yield industrial production. [Pg.465]

The name aldol was introduced by Wurt2 in 1872 to describe the product resulting from this acid-cataly2ed reaction of acetaldehyde. The addition will occur with base catalysis as well. [Pg.471]

Aldehydes fiad the most widespread use as chemical iatermediates. The production of acetaldehyde, propionaldehyde, and butyraldehyde as precursors of the corresponding alcohols and acids are examples. The aldehydes of low molecular weight are also condensed in an aldol reaction to form derivatives which are important intermediates for the plasticizer industry (see Plasticizers). As mentioned earlier, 2-ethylhexanol, produced from butyraldehyde, is used in the manufacture of di(2-ethylhexyl) phthalate [117-87-7]. Aldehydes are also used as intermediates for the manufacture of solvents (alcohols and ethers), resins, and dyes. Isobutyraldehyde is used as an intermediate for production of primary solvents and mbber antioxidants (see Antioxidaisits). Fatty aldehydes Cg—used in nearly all perfume types and aromas (see Perfumes). Polymers and copolymers of aldehydes exist and are of commercial significance. [Pg.474]

Formaldehyde condenses with itself in an aldol-type reaction to yield lower hydroxy aldehydes, hydroxy ketones, and other hydroxy compounds the reaction is autocatalytic and is favored by alkaline conditions. Condensation with various compounds gives methylol (—CH2OH) and methylene (=CH2) derivatives. The former are usually produced under alkaline or neutral conditions, the latter under acidic conditions or in the vapor phase. In the presence of alkahes, aldehydes and ketones containing a-hydrogen atoms undergo aldol reactions with formaldehyde to form mono- and polymethylol derivatives. Acetaldehyde and 4 moles of formaldehyde give pentaerythritol (PE) ... [Pg.491]

Examples include acetaldehyde, CH CHO paraldehyde, (CH CHO) glyoxal, OCH—CHO and furfural. The reaction is usually kept on the acid side to minimize aldol formation. Furfural resins, however, are prepared with alkaline catalysts because furfural self-condenses under acid conditions to form a gel. [Pg.293]

In E. coli GTP cyclohydrolase catalyzes the conversion of GTP (33) into 7,8-dihydroneoptetin triphosphate (34) via a three-step sequence. Hydrolysis of the triphosphate group of (34) is achieved by a nonspecific pyrophosphatase to afford dihydroneopterin (35) (65). The free alcohol (36) is obtained by the removal of residual phosphate by an unknown phosphomonoesterase. The dihydroneoptetin undergoes a retro-aldol reaction with the elimination of a hydroxy acetaldehyde moiety. Addition of a pyrophosphate group affords hydroxymethyl-7,8-dihydroptetin pyrophosphate (37). Dihydropteroate synthase catalyzes the condensation of hydroxymethyl-7,8-dihydropteroate pyrophosphate with PABA to furnish 7,8-dihydropteroate (38). Finally, L-glutamic acid is condensed with 7,8-dihydropteroate in the presence of dihydrofolate synthetase. [Pg.41]

Manufacture. Cinnamaldehyde is routinely produced by the base-cataly2ed aldol addition of ben2aldehyde /7(9(9-with acetaldehyde [75-07-0], a procedure which was first estabUshed in the nineteenth century (31). Formation of the (H)-isomer is favored by the transition-state geometry associated with the elimination of water from the intermediate. The commercial process is carried out in the presence of a dilute sodium hydroxide solution (ca 0.5—2.0%) with at least two equivalents of ben2aldehyde and slow addition of the acetaldehyde over the reaction period (32). [Pg.175]

It is also possible to carry out the aldol condensation under acidic conditions. The reactive nucleophile is then the enol. The mechanism, as established in detail for acetaldehyde, involves nucleophilic attack of the enol on the protonated aldehyde. [Pg.469]


See other pages where Acetaldehyde aldolization is mentioned: [Pg.460]    [Pg.693]    [Pg.460]    [Pg.460]    [Pg.280]    [Pg.428]    [Pg.460]    [Pg.460]    [Pg.719]    [Pg.460]    [Pg.693]    [Pg.460]    [Pg.460]    [Pg.280]    [Pg.428]    [Pg.460]    [Pg.460]    [Pg.719]    [Pg.163]    [Pg.331]    [Pg.460]    [Pg.1119]    [Pg.50]    [Pg.466]    [Pg.431]    [Pg.483]    [Pg.10]    [Pg.346]    [Pg.876]   
See also in sourсe #XX -- [ Pg.330 ]




SEARCH



Acetaldehyde Aldol condensation

Acetaldehyde aldol addition

Acetaldehyde crossed aldol reaction with

Acetaldehyde in aldol reaction

Acetaldehyde, aldol reaction

Acetaldehyde, aldol reaction 13C NMR absorptions

Acetaldehyde, aldol reaction electrostatic potential map

Acetaldehydes aldol reaction donors

Aldol acetaldehydes

Aldol acetaldehydes

Aldol condensation of acetaldehyde

Aldol reactions with acetaldehyde

Aldol, from acetaldehyde

Aldolization of acetaldehyde

© 2024 chempedia.info