Zerovalent palladium

More recently a variation of this mechanism was reported by Novak [37], The mechanism involves nucleophilic attack at co-ordinated phosphines and it explains the exchange of aryl groups at the phosphine centres with the intermediacy of metal aryl moieties. After the nucleophilic attack the phosphine may dissociate from the metal as a phosphonium salt. To obtain a catalytic cycle the phosphonium salt adds oxidatively to the zerovalent palladium complex (Figure 2.38). Note where the electrons go . 

The second mechanism involves the oxidative addition of methanol to the divalent acylpalladium complex 14 (19, Figure 12.14). This reaction has the only advantage that the new hydride initiator is formed in one step, but apart from this it is an unlikely reaction. Oxidative addition of alcohols is only known for electron-rich zerovalent palladium complexes [46],... 

Palladium(O) forms a complex with quinone that is now electron rich and can be protonated to give hydroquinone and palladium(II). The latter can start a new cycle via a carbomethoxy species after reaction with methanol and CO (c.f. reaction (6), Figure 12.4). Thus we have formally switched from a hydride initiator to a carbomethoxy initiator species. Addition of quinone to a nonactive or moderately active palladium system is a diagnostic tool that tells us whether zerovalent palladium is involved as an inactive state. Likewise, one might add dihydrogen to a system to see whether palladium(II) salts need to be converted to a hydride to reactivate our dormant catalyst. 

The reaction starts with an oxidative addition of an allylic compound to palladium(O) and a Tt-allyl-palladium complex forms. Carboxylates, allyl halides, etc. can be used. In practice one often starts with divalent palladium sources, which require in situ reduction. This reduction can take place in several ways, it may involve the alkene, the nucleophile, or the phosphine ligand added. One can start from zerovalent palladium complexes, but very stable palladium(O) complexes may also require an incubation period. Good starting materials are the 7t-allyl-palladium intermediates ... 

Bromophenyl)ethanol undergoes a palladium-catalyzed carbonylation which results in the formation of isochroman-l-one (79H(12)92l). It is considered that the reaction involves formation of an aryl-palladium complex (624) through insertion of the zerovalent palladium complex (623) into the aryl halide. Insertion of carbon monoxide followed by reductive elimination of the metal as a complex species leads to the isochromanone (Scheme 242). 

Mechanistic studies (ref. 6, 7) suggest the intermediacy of a zerovalent palladium complex produced by reductive elimination of an acid chloride, and the need for hydrogen chloride in order to cleave the C-OMe bond by preliminary protonation of the methoxy group leading to an allylpalla-dium complex which undergoes carbonylation (Scheme 1). 

In the case of experiments performed under the conditions of run 6, but in the presence of 1 ml of methanol, 1.6 equivalent of dimethyl carbonate was obtained according to GC analysis. No dimethyl carbonate was observed in the absence of hydrogen chloride. Therefore, in the early stage of the carbonylation of 3, Pd/C is partly oxidized to palladium chloride (eqn. 2). This compound reacts in turn with CO and MeOH to give, according to one of the routes described in Scheme 2, dimethyl carbonate and a zerovalent palladium complex (noted [Pd]). 

Amatore C, Jutand A, M Barki MA (1992) Evidence for the formation of zerovalent palladium from Pd(OAc)2 and triphenylphosphine. Organometallics 11 3009-3013... 

The reaction sequence in the vinylation of aromatic halides and vinyl halides, i.e. the Heck reaction, is oxidative addition of the alkyl halide to a zerovalent palladium complex, then insertion of an alkene and completed by /3-hydride elimination and HX elimination. Initially though, C-H activation of a C-H alkene bond had also been taken into consideration. Although the Heck reaction reduces the formation of salt by-products by half compared with cross-coupling reactions, salts are still formed in stoichiometric amounts. Further reduction of salt production by a proper choice of aryl precursors has been reported (Chapter III.2.1) [1]. In these examples aromatic carboxylic anhydrides were used instead of halides and the co-produced acid can be recycled and one molecule of carbon monoxide is sacrificed. Catalytic activation of aromatic C-H bonds and subsequent insertion of alkenes leads to new C-C bond formation without production of halide salt byproducts, as shown in Scheme 1. When the hydroarylation reaction is performed with alkynes one obtains arylalkenes, the products of the Heck reaction, which now are synthesized without the co-production of salts. No reoxidation of the metal is required, because palladium(II) is regenerated. 

Alkynes are readily hydrocyanated in the presence of a homogeneous catalyst, especially a nickel-based catalyst system. However, zerovalent palladium compounds are reported to catalyze the reaction as well, but are less efficient [60], The reaction gives an easy access to the synthetically valuable a,P-un-saturated nitriles. The use of acetone cyanohydrin as a synthetic equivalent for the difficult-to-handle HCN provides an efficient alternative, but the substrate/ catalyst ratio has to be increased in comparison with the reaction with HCN. The regioselectivity of the reaction is controlled by steric, electronic, and chelative effects. Investigations were predominantly performed by changing the substituent pattern on the acetylenic substrate [61]. 

The pivotal mechanistic role of zerovalent palladium results from the known activity seen for well-defined catalysts of the type Pd[P(aryl)3] (n = 2-4). The dissociation equilibria regarding n determine the catalytic performance, with excess phosphine, as expected, suppressing the reaction rate according to r [P(aryl)3] [50]. A sixfold excess of phosphine over palladium practically kills catalysis [50 a]. 

Amatore, C., Azzabi, M., Jutand, A. Role and effects of halide ions on the rates and mechanisms of oxidative addition of iodobenzene to low-ligated zerovalent palladium complexes PdO(PPh3)2. J. Am. Chem. Soc. 1991,113, 8375-8384. 

Phase-transfer catalysis is a useful procedure for a variety of interesting metal-catalyzed reactions. - However, only one example of this approach has been reported for the synthesis of diynes by the sp-sp carbon coupling reaction. Thus vinylic dibromides derived from aromatic aldehydes have been shown to react with carbon monoxide, in the presence of zerovalent palladium compounds as the metal catalyst, and under phase-transfer conditions in a two-phase system (benzene, 5 M NaOH), to give the corresponding diynes in reasonable yields (equations 21 and 22). ... 

Miscellaneous Methods of Preparing Phosphines. Palladium-catalysed formation of phosphorus-carbon bonds continues to be developed as a useful route to organophosphines. The reactions of primary or secondary phosphines with aryl- or vinyl-halides in the presence of a palladium catalyst, usually palladium acetate or a zerovalent palladium-phosphine complex, have been used in the synthesis of steroidal phosphines, e.g., (128), the cationic diphosphine system... 

Palladium is one of the most versatile and efficient catalyst metals in organic synthesis. Solubility in water is achieved by utilization of simple palladium(II) salts or water-soluble ligands, such as TPPTS and TPPMS. The active catalysts for Heck-type reactions are zerovalent palladium(O) species [3], which are often generated in situ by thermal decomposition of a Pd(II) precursor or by the application of a reducing agent, e.g., 1-6 equiv. of a phosphine in the presence of base generates Pd(0) and the phosphine oxide (Eq. 3) [4],... 

This reaction is catalyzed by nickel or palladium complexes. However, the selectivity and activity of nickel catalysts are lower than those of palladium catalysts. Palladium-catalyzed reactions give linear dimers selectively and no cydization takes place. Not only the zerovalent palladium complexes but also certain bivalent ones can be used as active catalysts in combination with excess PPh3. However, the zerovalent palladium complexes are somewhat tedious to prepare and unstable in oxygen, so easily available and stable bivalent palladium compounds such as Pd(OAc)2 are generally used with PPh3. A proposed mechanism is given in Figure 1 [1 f]. 

For related palladium-catalyzed cyclizations of enolates, see Ciufolini, M.A. Qi, H.B. Browne, M.E. Intramolecular arylations of soft enolates catalyzed by zerovalent palladium. J. Org. Chem. 1988, 53, 4149 151. Muratake, H. Natsume, M. Nakai, H. Palladium-catalyzed intramolecular -arylation of aliphatic ketone, formyl, and nitro groups. Tetrahedron 2004, 60, 11783-11803. Muratake, H. Natsume, M. Palladium-catalyzed intramolecular -arylation of aliphatic ketones. Tetrahedron Lett. 1997, 38, 7581-7582. 

Pd(OAc)2- Palladium(Il) acetate can be a source of Pd(0) complexes. Since it can easily be reduced to zerovalent palladium by appropriate reductants, the new Pd(0) complexes are generated in the presence of suitable ligands. In many sitnations, solvent (alcohol, etc.) or coexistent ligands (such as phosphines) work as rednctants thus, additional reducing reagents are not always required. 

The scope and mechanism of palladium-catalyzed annulation of internal alkynes to give 2,3-disubstituted indoles, the effect of substituents on the aniline nitrogen or on the alkynes, as well as the effect of the salts such as LiCl or n-BuaNCl were studied by Larock and coworkers (1998 JOC7652). The mechanism they propose for indole synthesis proceeds as follows (a) reduction of the Pd(OAc)2 to Pd(0) (b) coordination of the chloride to form a chloride-Ugated zerovalent palladium species (c) oxidative addition of the aryl iodide to Pd(0) (d) coordination of the alkyne to the... 

Eauvarque, J.E., Pfliiger, F. and Troupel, M. (1981) Kinetics of the oxidative addition of zerovalent palladium to aromatic iodides. J. Organomet. Chem., 208, 419-27. 

---