Wood pulping

CaH803. Fine white needles, m.p. 82°C, b.p. 285°C, strong vanilla odour, characteristic taste. It occurs extensively in nature, and is the odoriferous principle of the vanilla pod it can be obtained from the glucoside coniferin. Vanillin is made commercially from the ligno-sulphonic acid obtained as a by-product in the manufacture of wood pulp. It is one of the most important flavouring and perfuming... 

Hydrogen peroxide in aqueous solution has many uses, because the products from its reaction are either water or oxygen, which are generally innocuous. The chief use is bleaching of textiles, both natural and synthetic, and of wood pulp for paper. Other uses are the oxidation of dyestuffs, in photography and in the production of... 

Liquid chlorine dioxide, ClOj, boils at 284 K to give an orange-yellow gas. A very reactive compound, it decomposes readily and violently into its constituents. It is a powerful oxidising agent which has recently found favour as a commercial oxidising agent and as a bleach for wood pulp and flour. In addition, it is used in water sterilisation where, unlike chlorine, it does not produce an unpleasant taste. It is produced when potassium chlorate(V) is treated with concentrated sulphuric acid, the reaction being essentially a disproportionation of chloric(V) acid ... 

Cellulosics. CeUulosic adhesives are obtained by modification of cellulose [9004-34-6] (qv) which comes from cotton linters and wood pulp. Cellulose can be nitrated to provide cellulose nitrate [9004-70-0] which is soluble in organic solvents. When cellulose nitrate is dissolved in amyl acetate [628-63-7] for example, a general purpose solvent-based adhesive which is both waterproof and flexible is formed. Cellulose esterification leads to materials such as cellulose acetate [9004-35-7], which has been used as a pressure-sensitive adhesive tape backing. Cellulose can also be ethoxylated, providing hydroxyethylceUulose which is useful as a thickening agent for poly(vinyl acetate) emulsion adhesives. Etherification leads to materials such as methylceUulose [9004-67-5] which are soluble in water and can be modified with glyceral [56-81-5] to produce adhesives used as wallpaper paste (see Cellulose esters Cellulose ethers). 

Cotton linters or wood pulp are nitrated using mixed acid followed by treatment with hot acidified water, pulping, neutralization, and washing. The finished product is blended for uniformity to a required nitrogen content. The controlling factors in the nitration process are the rates of diffusion of the acid into the fibers and of water out of the fibers, the composition of mixed acid, and the temperature (see Cellulose esters, inorganic esters). 

Fig. 11. Flow diagram for the beater additive process. Kraft represents the kraft process wood pulp and NC is nitrocellulose used as starting materials...

Pulp-like olefin fibers are produced by a high pressure spurting process developed by Hercules Inc. and Solvay, Inc. Polypropylene or polyethylene is dissolved in volatile solvents at high temperature and pressure. After the solution is released, the solvent is volatilised, and the polymer expands into a highly fluffed, pulp-like product. Additives are included to modify the surface characteristics of the pulp. Uses include felted fabrics, substitution in whole or in part for wood pulp in papermaking, and replacement of asbestos in reinforcing appHcations (56). 

CeUulose is the most abundant polymer, an estimated 10 t being produced aimuaUy by natural processes. SuppUes for the rayon industry can be obtained from many sources, but in practice, the wood-pulping processes used to supply the needs of the paper and board industries have been adapted to make the necessary speciaUy pure grade. Of the 3 x 10 t of wood used by the paper and board industry (13) in 1989, about 6 x 10 t were purified to provide the 2.5 x 10 t of dissolving pulp required by the viscose processes. 

E. Hamilton and B. Leopold, eds.. Pulp and Paper Manufacture, Vol. 3, Secondary Fibers and Non-Wood Pulping, Joint Textbook Committee of the Paper Industry, Tappi, Adanta, Ga., 1987. 

Vanilla flavoring in bakery goods, confectionery, and many fro2en desserts need not be natural vanilla. The artificial and synthetic vanilla flavors that are used include vanillin [121-33-5] from lignin (wood pulp), ethyl vanillin [121 -32-4] and vanitrope [94-86-0], the latter two are synthetics. Over 90% of the U.S. market for vanilla flavor contains vanillin. These synthetics continue to dominate the market because of availabiUty, quahty, and relatively low and stable prices. 

---