2- vinyllithium

Conjugate addition of vinyllithium or a vinyl Grignard reagent to enones and subsequent oxidation afford the 1.4-diketone 16[25]. 4-Oxopentanals are synthesized from allylic alcohols by [3,3]sigmatropic rearrangement of their vinyl ethers and subsequent oxidation of the terminal double bond. Dihydrojasmone (18) was synthesized from allyl 2-octenyl ether (17) based on Claisen rearrangement and oxidation[25] (page 26). 

Vinylidene polymers Vinylidine chloride Vinyl interlayer Vinylite flooring Vinyl ketal polymers Vinyllithium [917-57-7]... 

Anionic polymerization of vinyl monomers can be effected with a variety of organometaUic compounds alkyllithium compounds are the most useful class (1,33—35). A variety of simple alkyllithium compounds are available commercially. Most simple alkyllithium compounds are soluble in hydrocarbon solvents such as hexane and cyclohexane and they can be prepared by reaction of the corresponding alkyl chlorides with lithium metal. Methyllithium [917-54-4] and phenyllithium [591-51-5] are available in diethyl ether and cyclohexane—ether solutions, respectively, because they are not soluble in hydrocarbon solvents vinyllithium [917-57-7] and allyllithium [3052-45-7] are also insoluble in hydrocarbon solutions and can only be prepared in ether solutions (38,39). Hydrocarbon-soluble alkyllithium initiators are used directiy to initiate polymerization of styrene and diene monomers quantitatively one unique aspect of hthium-based initiators in hydrocarbon solution is that elastomeric polydienes with high 1,4-microstmcture are obtained (1,24,33—37). Certain alkyllithium compounds can be purified by recrystallization (ethyllithium), sublimation (ethyllithium, /-butyUithium [594-19-4] isopropyllithium [2417-93-8] or distillation (j -butyUithium) (40,41). Unfortunately, / -butyUithium is noncrystaUine and too high boiling to be purified by distiUation (38). Since methyllithium and phenyllithium are crystalline soUds which are insoluble in hydrocarbon solution, they can be precipitated into these solutions and then redissolved in appropriate polar solvents (42,43). OrganometaUic compounds of other alkaU metals are insoluble in hydrocarbon solution and possess negligible vapor pressures as expected for salt-like compounds. 

Vinyllithium [917-57-7] can be formed direcdy from vinyl chloride by means of a lithium [7439-93-2] dispersion containing 2 wt % sodium [7440-23-5] at 0—10°C. This compound is a reactive intermediate for the formation of vinyl alcohols from aldehydes, vinyl ketones from organic acids, vinyl sulfides from disulfides, and monosubstituted alkenes from organic halides. It can also be converted to vinylcopper [37616-22-1] or divinylcopper lithium [22903-99-7], which can then be used to introduce a vinyl group stereoselectively into a variety of a, P-unsaturated systems (26), or simply add a vinyl group to other a, P-unsaturated compounds to give y, 5-unsaturated compounds. Vinyllithium reagents can also be converted to secondary alcohols with trialkylb o r ane s. 

Other 17a-substituted derivatives are obtained from l7-ketones and benzyimagnesium chloride/ allylmagnesium bromide,vinyllithium and cyclopropyllithium. ... 

Vinyllithium Reaction To a cooled solution of 80 g of 3y -hydroxy-5a-androstan-17-one in 1.5 liters of tetrahydrofuran is added 400 ml of 2 4/ vinyllithium in tetrahydrofuran. The solution is stirred at 0° for 0.5 hr, allowed to warm to room temperature, and stirred an additional hr. Cone ammonium chloride solution is added, and the mixture is concentrated under reduced pressure until a precipitate begins to form. The slurry is poured into water, and the precipitate is filtered and recrystallized twice from methanol, affording 52.2 g (60%) of 17a-vinyl-5a-androstane-3, 17i -diol mp 205-207.5°. 

Vibrational relaxation, 293, 295 17 a-Vinyl-5a-androstane-3 /3,17 /3-diol, 164 Vinyllithium, 64, 163 Vinylmagnesium chloride, 58 4-Vinyltestosterone, 89... 

Vinyl fluorinated zinc reagents can be prepared by two different methods (1) capture of the corresponding vinyllithium reagent at low temperatures with a zinc salt and (2) direct insertion of zinc into a carbon-halogen bond. 

The first method involves generation of an unstable vinyllithium denvative at low temperatures from the corresponding vinyl halide or 1-hydroalkene Addition of zinc chloride and warming to room temperature gives the stable vinyl zinc reagent [100, lOI, 102, 103] (equations 69-72)... 

C F[3CF=CFHgCgH5 (30%) [16. Vinyllithium reagents behave similarly [I81 (equation 128). 

The asymmetric addition of organolithium reagents to arylox azolines has been used to construct highly complex polycyclic terpene structures found in natural products. For example, the asymmetric addition of vinyllithium to chiral naphthyloxazoline 3 followed by treatment of the resulting anionic intermediate with iodoethyl dioxolane 61... 

Removal of the carbonate ring from 7 (Scheme 1) and further functional group manipulations lead to allylic alcohol 8 which can be dissected, as shown, via a retro-Shapiro reaction to give vinyl-lithium 9 and aldehyde 10 as precursors. Vinyllithium 9 can be derived from sulfonyl hydrazone 11, which in turn can be traced back to unsaturated compounds 13 and 14 via a retro-Diels-Alder reaction. In keeping with the Diels-Alder theme, the cyclohexene aldehyde 10 can be traced to compounds 16 and 17 via sequential retrosynthetic manipulations which defined compounds 12 and 15 as possible key intermediates. In both Diels-Alder reactions, the regiochemical outcome is important, and special considerations had to be taken into account for the desired outcome to. prevail. These and other regio- and stereochemical issues will be discussed in more detail in the following section. 

Hodgson et al. have demonstrated that arylalkenes 139 and dienes 140 can readily be prepared from simple terminal epoxides in a highly stereoselective manner by employing LTMP as base in combination with aryl and vinyllithiums as nucleophiles at 0 °C (Scheme 5.31) [41]. Without addition of LTMP, secondary alcohols... 

Shimizu et al. have introduced an indirect route to stabilized lithiated epoxides. Treatment of dichlorohydrin 184 with 3 equiv. of vinyllithium in the presence of 3 equiv. of LTMP gave lithiated epoxide 185, which could be trapped with a range of electrophiles (e. g., Me3SnCl) to give 1,2-divinyl epoxides 186 these in turn underwent Cope rearrangements on heating to give oxepanes 187 (Scheme 5.43) [67]. 

It is unlikely that a (8-chelate analogous to 2 is responsible for the very high syn diastereoselectivity which is observed with the chiral vinyllithium reagent (7 )-3 upon addition to (/t)-3-(benzyl oxy)butanal (Table 13)11 °. 

This type of metallic exchange is used much less often than 12-32 and 12-33. It is an equilibrium reaction and is useful only if the equilibrium lies in the desired direction. Usually the goal is to prepare a lithium compound that is not prepared easily in other ways, for example, a vinylic or an allylic lithium, most commonly from an organotin substrate. Examples are the preparation of vinyllithium from phenyl-lithium and tetravinyltin and the formation of a-dialkylamino organolithium compounds from the corresponding organotin compounds ... 

Ketone p-toluenesulfonylhydrazones are converted to alkenes on treatment with strong bases such as an alkyllithium or lithium dialkylamide.286 Known as the Shapiro reaction,2 7 this proceeds through the anion of a vinyldiimide, which decomposes to a vinyllithium reagent. Treatment of this intermediate with a proton source gives the alkene. 

In another example, a sequence of methylation-elimination-hydroxymethylation was used to install the functionality pattern found in the A-ring of taxol. The hydrazone dianion was generated and methylated at low temperature. The hydrazone was then deprotonated again using excess n-butyllithium and allowed to warm to room temperature, at which point formation of the vinyllithium occurred. Reaction with paraformaldehyde generated the desired product.290... 

---