Vinyl radicals, electron affinity

One of the earliest measurements of the gas-phase equilibrium acidity of propene involved measuring the rates of reaction of propene with hydroxide ion in both directions33. The resulting equilibrium constant gave A//acid = 391 1 kcalmol-1. In the case of ethylene, the acidity and independently measured electron affinity of vinyl radical were used to determine the bond dissociation energy, a quantity difficult to obtain accurately by other means8. 

The work function of the rubbing surfaces and the electron affinity of additives are interconnected on the molecular level. This mechanism has been discussed in terms of tribopolymerization models as a general approach to boundary lubrication (Kajdas 1994, 2001). To evaluate the validity of the anion-radical mechanism, two metal systems were investigated, a hard steel ball on a softer steel plate and a hard ball on an aluminum plate. Both metal plates emit electrons under friction, but aluminum produced more exoelectrons than steel. With aluminum, the addition of 1% styrene to the hexadecane lubricating fluid reduced the wear volume of the plate by over 65%. This effect considerably predominates that of steel on steel. Friction initiates polymerization of styrene, and this polymer formation was proven. It was also found that lauryl methacrylate, diallyl phthalate, and vinyl acetate reduced wear in an aluminum pin-on-disc test by 60-80% (Kajdas 1994). 

The above examples show the complexity of the systems involving radical-anions derived from compounds of higher electron-affinity. It is not surprising, therefore, that benzophenone ketyl and other similar compounds do not initiate styrene polymerization, although they initiate polymerization of acrylonitrile or methyl-methacrylate. On the other hand, the monomeric dianions of benzophenone initiate polymerization of styrene as well as of other monomers, but not of vinyl chloride or acetate. Mechanisms of these initations were not investigated and presumably are complex. 

---