Vinyl monomers poly radicals

Here we discuss dispersion polymerizations that are not related to vinyl monomers and radical polymerization. The first one is the ring-opening polymerization of e-caprolactone in dioxane-heptane (30). A graft copolymer, poly(dodecyl acrylate)-g-poly(e-caprolactone), is used as a stabilizer. The polymerization proceeds via anionic or pseudoanionic mechanism initiated by diethylaluminum ethoxide or other catalysts. The size of poly(caprolactone) particles depends on the composition of stabilizer, ranging from 0.5 to 5 i,m. Lactide was also polymerized in a similar way. Poly(caprolactone) and poly(lactide) particles with a narrow size distribution are expected to be applied as degradable carriers of drugs and bioactive compounds. 

As mentioned previously, a given y-radiation-source geometry will supply free radicals at a constant rate for vinyl monomer poly-... 

Poly(acrylates) and poly(methacrylates) are commercially important polymers with a myriad of uses, including paper and textile coatings, adhesives, caulks and sealants, plasticizers, paint and ink additives, and optical components for computer displays. Since they are derived from monosubsti-tuted and unsymmetrical 1,1-disubstituted vinyl monomers, poly(acrylate) and poly(methacrylate) products with a spectrum of tacticities and thereby mechanical properties are potentially accessible. To date, however, industrially produced materials are generated using free-radical polymerization technology, which offers limited scope for tacticity control. Therefore, there has been much interest in the development of metal-catalyzed routes to these polymers where the coordination environment of the metal offers the potential to influence tacticity. 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

The polymerization of vinyl chloride monomer, in common with other vinyl monomers, proceeds by a free-radical mechanism involving the usual steps of initiation, propagation, and termination. Poly(vinyl chloride) is formed in a regular head-to-tail manner Eq. (1) [3-6]. 

Figure 14.4.5 Free-radical vinyl polymerization of the monomer methyl methacrylate to form the vinyl polymer poly(methyl methacrylate) (PMMA).

Since these reports, a number of new approaches based on vinyl monomers and various initiating systems have been explored to yield hyperbranched polymers such as, poly(4-acetylstyrene) [26], poly(vinyl ether) [27] and polyacrylates [28], In view of the fact that free radical polymerizations are most widely used in industrial polymerization processes the development of these procedures for vinyl monomers has opened a very important area for hyperbranched polymers. 

Poly (methyl methacrylate) was also subjected to mechanical reaction in a vibrating mill in common solvent for several monomers (ethylene, acrylic acid and its esters, acrylonitrile and styrene) at temperatures from —196 to 20° C (22). The formation of macroradicals and their reactions were followed by EPR (electron paramagnetic resonance). The macroradicals reacted with vinyl monomers at temperatures less than —100° C, while quinones underwent reaction as low as —196° C. The same experiments were performed also with polystyrene and polybutylenedimethacrylate. The radicals from polystyrene were more reactive than those from poly(methyl methacrylate). 

Commodity Chain-Growth Polymers. Two of the largest commodity wafer-soluble polymers are poly(vinyl alcohol) (PVA) and polyacrylamide (PAM). They are prepared by the free-radical initiation of vinyl monomers, a chain-growth polymerization technique. 

The preparation of poly(2-vinyl-pyridine), by radical or anionic polymerization of the corresponding monomer, has been described long time ago. Atactic or isotactic, partially crystallizable polymers may be obtained 30). Poly(4-vinyl-pyridine) may be prepared in a similar way 31). 

A majority of commercial polymers are produced by free-radical polymerization. Foremost among these are polystyrene, polyethene (i.e., polyethylene), poly(vinyl chloride), poly(vinyl alcohol), poly (vinyl acetate), and poly (methyl methacrylate). In each of these, polymerization involves an olefinic double bond. However, free-radical polymerization is not restricted to such monomers. 

The term free radical is often used in the context of a reactive intermediate, as in the case of polymerization of vinyl monomers, but the same structure (unpaired electron) can and does exist in a kind of immobilized environment. For example, a bulk-polymerized (monomer and initiator only in the polymerization system) poly(methyl methacrylate) (PMMA) contains an appreciable number of free radicals that can be detected by electron spin resonance (ESR) [1]. When the polymerization system becomes highly viscous toward the end of the bulk polymerization, gel formation occurs and immobilizes the growing end of free radical chain growth polymerization, preventing recombination of two free radical ends of growing chains. 

Commercially, suspension polymerizations have been limited to the free radical polymerization of water-insoluble liquid monomers to prepare a number of granular polymers, including polystyrene, poly(vinyl acetate), poly(methyl methacrylate), polytetrafluoroethylene, extrusion and injection-molding grades of poly(vinyl chloride), poly(styrene-co-acrylonitrile) (SAN), and extrusion-grade poly(vinylidene chloride-covinyl chloride). It is possible, however, to perform inverse suspension polymerizations, where water-soluble monomer (e.g., acrylamide) is dispersed in a continuous hydrophobic organic solvent. 

---