Vinyl-containing polymers

Fig. 18 Successful use of vinyl glycolic acid (VGA) as a monomer for PLA based co-polymers (via hydrolysis of MVG). The vinyl containing polymer was active for thiol-ene...

Poly(vinyl alcohol) used to manufacture the poly(vinyl acetal)s is made from poly(vinyl acetate) homopolymer (see Vinyl polymers, vinyl alcohol polymers Vinyl POLYMERS, vinyl acetate polymers). Hydrolysis of poly(vinyl acetate) homopolymer produces a polyol with predominandy 1,3-glycol units. The polyol also contains up to 2 wt % 1,2-glycol units that come from head-to-head bonding during the polymeri2ation of vinyl acetate monomer. Poly(vinyl acetate) hydrolysis is seldom complete, and for some appHcations, not desired. For example, commercial PVF resins may contain up to 13 wt % unhydroly2ed poly(vinyl acetate). Residual vinyl acetate units on the polymer help improve resin solubiHty and processibiHty (15). On the other hand, the poly(vinyl alcohol) preferred for commercial PVB resins has less than 3 wt % residual poly(vinyl acetate) units on the polymer chain. 

Copolymers wet and adhere well to nonporous surfaces, such as plastics and metals. They form soft, flexible films, in contrast to the tough, horny films formed by homopolymers, and are more water-resistant. As the ratio of comonomer to vinyl acetate increases, the variety of plastics to which the copolymer adheres also increases. Comonomers containing functional groups often adhere to specific surfaces for example, carboxyl containing polymers adhere well to metals. 

Poly(acryhc acid), poly(methacryhc acid), and maleic anhydride containing polymers reacts with poly(vinyl alcohol) to form insoluble gels (119—122), which are usehil as absorbents for water, blood, urine, etc. 

Fluorine-containing Polymers 13.6 POLY(VINYL FLUORIDE) (PVF)... 

Postelnek,W., Colemann, L. E., and Lovelace, A. M. Fluorine-Containing Polymers. I. Fluorinated Vinyl Polymers with Functional Groups, Condensation Polymers, and Styrene Polymers. Vol. 1, pp. 75— 113. 

Hydroxyl containing polymers may be cross-linked with diisocyanates. Fordyce and Ferry cross-linked styrene-maleic anhydride copolymers through the action of glycols. The copolymerization of divinyl with vinyl monomers may be looked upon as a method of cross-linking chain polymers. The cross-linkages are introduced simultaneously with the growth of the linear polymer chains, rather than afterwards, but this difference is secondary. 

An additive described as reducing the water loss and enhancing other properties of well-treating fluids in high-temperature subterranean environments consists of polymers or copolymers from N-vinyl lactam monomers or vinyl-containing sulfonate monomers. Organic compounds like lignites, tannins, and asphaltic materials are added as dispersants [175]. 

Polymer from N- Vinyl Lactams and Vinyl Sulfonates. A water-soluble polymer from N-vinyl lactam monomers or vinyl-containing sulfonate monomers... 

Several carbonyl-containing peroxide additives have been shown to increase the initial rate of the nonoxidative photo-dehydrochlorination of PVC (54). In studies with polymeric ketones unrelated structurally to PVC, the excited singlet and triplet states of the carbonyl groups in these polymers were found to sensitize 0-0 homolysis at rates approaching diffusion control (55). Similar reactions may well occur in oxidized vinyl chloride polymers. 

Dispersion, Flaring, Scrubbing, and Containment An example of an overpressure protection system designed to reduce emissions to the atmosphere and at the same time provide adequate protection to the equipment has been described [234]. The equipment indicated is used for the manufacture of ethylene-vinyl acetate-vinyl chloride polymer emulsions. The design pressures are up to 100 bar. 

Fluorinated polymers, especially polytetrafluoroethylene (PTFE) and copolymers of tetrafluoroethylene (TFE) with hexafluoropropylene (HFP) and perfluorinated alkyl vinyl ethers (PFAVE) as well as other fluorine-containing polymers are well known as materials with unique inertness. However, fluorinated polymers with functional groups are of much more interest because they combine the merits of pefluorinated materials and functional polymers (the terms functional monomer/ polymer will be used in this chapter to mean monomer/polymer containing functional groups, respectively). Such materials can be used, e.g., as ion exchange membranes for chlorine-alkali and fuel cells, gas separation membranes, solid polymeric superacid catalysts and polymeric reagents for various organic reactions, and chemical sensors. Of course, fully fluorinated materials are exceptionally inert, but at the same time are the most complicated to produce. 

---