Coatings, vapor deposited

Pierson, H., A Survey of the Chemical Vapor Deposition of Refractory Transition Metal Borides, in Chemical Vapor Deposited Coatings, pp. 27-45, Am. Ceram. Soc. (1981)... 

A graduate of the University of Paris and the French Naval College, Mr.Pierson has pubhshed over one hundred technical pubhcations in the field of Chemical Vap or Deposition. He has alsobeen a contributor to abook on Chemically Vapor Deposited Coatings published by the American Ceramic Society, and has authored three books. 

Whiskers have been produced in a range of fiber sizes and in three forms grown wool, loose fiber, and felted paper. The wool has a fiber diameter of 1-30 p,m and aspect ratios of 500-5000. The wool bulk density is about 0.03 g/cm, which is less than 1% solids. This is a very open structure, suitable for a vapor-deposition coating on the whiskers or direct use as an insulation sheet. Loose fibers are produced by processing the larger diameter fiber to yield lightly interlocked clusters of fibers with aspect ratios of 10-200. In felt or paper, the whiskers are randomly oriented in the plane of the felt and have fiber aspect ratios ranging from 250 to 2500. The felted paper has approximately 97% void volume and a density of 0.06-0.13 g/cm. ... 

Fig. 16 (a) Effect of supersaturation-temperature-structure relationship on the vapor deposited coatings, (b) the effect of free carbon on the morphology of the TiC deposition for a gas mixture of TiCI, CH and H, (1) cross-section of the TiC coating on WC-Co, and (2) surface morphology of the TiC whiskers. 

M.R. Hendrick, H. Shao, TJ. Hwang, and A.T. Hunt, Low Cost Corrosion Protection of Metals by Combustion Chemical Vapor Deposited Coatings, Materials Solutions Conference, Rosemont, Illinois, ASM International, Materials Park, Ohio, 1998. 

W.B. Carter, J.M. Hampikian, S. Godfrey, and T.A. Polley, Thermal Aging of Combustion Chemical Vapor Deposited Coatings, Materials and Manufacturing Processes, Vol.lO, No.5, 1995, pp.l007-1020. 

Volume 555— Properties and Processing of Vapor-Deposited Coatings, R.H. Johnson,... 

Deposition coated stopper Vapor deposition coated solid film Compatibility Total AB... 

D. M. Dugger, M.T. Chemical vapor deposition coating for micromachines. In Aeiv Methods. Mechanisms and Models of Vapor Deposition, Materials Research Society Symposium Proceedings 2000 Vol. 616, 21-26. 

Chemical vapor deposition Coating outside pores (tens of run) Copolymers Mclnnes et al. (2012) ... 

Carbon Chemical vapor deposition Coating inside pores Carbon Mattei et al. (2007), Fernandes et al. (1999) , Baranauskas... 

Table 28.7 Comparison between chemical vapor deposition and physical vapor deposition coating techniques...

Figure 7.39 Design of thermal barrier coatings (TBCs) applied to the Ni superalloy substrate of a gas turbine blade, showing the typical microstructure of an electron beam-vapor deposited coating (EB-PVD) as...

Bally F, Cheng K, Nandivada Ft, Deng XP, Ross AM, Panades A, Lahaim J (2013) Co-immobilization of biomolecules on ultrathin reactive chemical vapor deposition coatings using multiple click chemistry strategies. ACS Appl Mater Interfaces 5 9262-9268... 

A.W. Mullendore, J.B. Whitley, H.O. Pierson, D.M. Mattox, Mechanical properties of chemically vapor deposited coatings for fusion reactor applications, J. Vac. Sci. Technol. 18 (1981) 1049. 

W.-D. Miinz, F.J.M. Hauser, D. Schulze, B. Bull, A new concept for physical vapor deposition coating combining the methods of arc evaporation and unbalanced-magnetron sputtering. Surf. Coat. Technol. 49 (1991) 161. 

---