Coating physical vapor deposition

Thin Film Formation Liquid Phase Coating Physical Vapor Deposition Chemical Vapor Deposition... 

Protecting a surface from corrosion by coating can be accomplished by a number of well-established processes which include paints, metal plating (with zinc or cadmium), diffusion, thermal spraying, and, more recently, vapor deposition processes. Of these physical vapor deposition (PVD) is used extensively in corrosion protection. Typical applications are ... 

Chemical vapor deposition competes directly with other coating processes which, in many cases, are more suitable for the application under consideration. These competing processes comprise the physical vapor deposition (PVD) processes of evaporation, sputtering, and ion plating, as well as the molten-material process of thermal spray and the liquid-phase process of solgel. A short description of each process follows. For greater detail, the listed references should be consulted. 

Diserens, M., Patscheider, J., and Levy, F., "Mechanical Properties and Oxidation Resistance of Nanocomposite TiN-SiN Physical-Vapor-Deposited Thin Films, Surf. Coat. Technol,Vol. 120 Ill, 1999,65. 

Recent trials and long-term field tests have shown that the combined application of plasmanitriding and physical vapor deposited (PVD) hard-coating currently appears to be the best solution, both in terms of improved wear life and antisticking characteristics. 

This is why companies like Berstorff use PVD-coated screws for this purpose as they exhibit better wear protection than screws with nitrided or stellited surfaces. PVD stands for physical vapor deposition and refers to the evaporation of chrome and its accelerated application onto the surface. In combination with nitrogenous gases, the metal ions form hard nitrides that multiply the wear resistance of the screws. 

Physical Vapor Deposition Often abbreviated to PVD. A process for applying a coating of one material to the surface of another, essentially by sublimation. To be distinguished from Chemical Vapor Deposition. 

Ultrathin PTFE, PVDF, and FEP Coatings Deposited Using Plasma-Assisted Physical Vapor Deposition... 

This chapter examines the deposition of fluorinated polymers using plasma-assisted physical vapor deposition. Ultrathin coatings, between 20 and 5000 nm have been produced, using RF magnetron sputtering. The method of coating, fabrication, and deposition conditions are described. 

Saha et al. [109] have proposed an improved ion deposition methodology based on a dual ion-beam assisted deposition (dual IBAD) method. Dual IBAD combines physical vapor deposition (PVD) with ion-beam bombardment. The unique feature of dual IBAD is that the ion bombardment can impart substantial energy to the coating and coating/substrate interface, which could be employed to control film properties such as uniformity, density, and morphology. Using the dual lABD method, an ultralow, pure Ft-based catalyst layer (0.04-0.12 mg Ft/cm ) can be prepared on the surface of a GDL substrate, with film thicknesses in the range of 250-750 A. The main drawback is that the fuel cell performance of such a CL is much lower than that of conventional ink-based catalyst layers. Further improvement... 

It appears in this discussion that electrochemical parameters and not substrate properties are the main deciding factors in determining the texture of deposits. This is indeed so when a deposit s thickness is 1 pum or more. In case of thinner deposits, the substrate plays an important role as well (see the text above). Another nonelectrochem-ical factor may be the codeposition of particulate matter with some metal deposits. To summarize, we note that texture is influenced mostly by deposition current density, as it is itself a function of bath pH, potential, and other parameters. Not surprising, then, is the fact that in the case of physical vapor deposition (PVD), the deposition rate is the determining factor in setting the texture of the coating. 

Other possible applications are clear coats in automotive interiors (dashboard instrument screen-printed and top coats for gloss control, interior vinyl clear coat with excellent mar resistance and low gloss, wood grain printing and top coats for interior laminates), on alloy wheels and wheel covers and under the hood parts, and UV curable paint over physical vapor deposition (PVD) surfaces of various parts. Other examples are ... 

Table 51 shows an overview of pigments with luster effects. Effect pigments can be classified as metal platelets, oxide-coated metal platelets, oxide-coated mica platelets, platelet-like mono-crystals and comminuted PVD-films (Physical Vapor Deposition). Aims of new developments are new effects, colors, improvement of hiding power, increase of the interference color, increase of light and weather stability and improved dispersibility characteristics. Of special interest are pigments which are toxicologically safe and which can be produced by ecologically acceptable processes. 

Deposition is used in industry to create very thin films of material on the surfaces of objects. This process, known as physical vapor deposition (PVD), takes specific gas molecules and changes them into solids that are deposited as coatings on the surface of objects. In some cases, the coatings are protective in other cases, the coatings create a pleasing appearance. 

Physical vapor deposition is also used to add a clear coat to aluminum balloons and snack bags. The deposition of a specific film made from polyester on the outside of shiny, aluminum balloons gives the balloon added strength while the film remains transparent. The deposition of a similar polyester film on snack bags provides a solid barrier to gases and smells. This industrial phase change is not particularly glamorous or well-known, but it is used in many applications that consumers use in everyday products. 

---