Vacuum assisted liquid injection molding process

Liquid Composite Molding (LCM) is the common name for several similar processes for the manufacturing of polymeric fiber reinforced composites. Widely used processes that belong to this class are Resin Transfer Molding (RTM), Vacuum-Assisted Resin Injection (VARI), and Structural-Reaction Injection Molding (S-RIM). 

Resin transfer molding With vacuum assisted RTM, this process can be called infusion molding. RTM usually uses liquid TS plastics that is transferred or injected into an enclosed mold usually at low pressures of about 60 psi (410 kPa) in which reinforcement... 

It is also useful for making fabric-reinforced laminates. The multiple layers of fabric are hand-laid into the mold in a predetermined pattern to optimize strength properties. Then the mold is closed, and the liquid mixture is injected to impregnate the fabric, often using vacuum assist to replace air tiioroughly by resin. The assembly is held in the press and heated until cured. The products are similar to those made by perform press molding. The process is called resin transfer molding. 

Resin Transfer Molding (RTM) is accomplished with the use of a reinforcement system that has been preshaped to fit the mold cavity and a low-pressure resin in liquid form that is injected into a closed mold. The injection process can be assisted with the use of a vacuum system to provide for evacuation of any volatiles and to gain molded density. 

---