Trimethylamine, preparation

CgHijClNjOj. Colourless, hygroscopic, m.p. 2I0-212 C (decomp.). Prepared from fi-chloroethyl carbamate and trimethylamine. It has a physiological action similar to that of acetylcholine, but more prolonged, as it is less readily hydrolysed. It is used for intestinal atony following operations, and can be given orally. 

CjHiaNO, [Mc3NCH= CH2] OH. A liquid forming a crystalline trihydrate, It is present free and combined in brain and other animal and vegetable products and is formed as a product of putrefaction of lecithin. It can be prepared synthetically from choline and decomposes easily to trimethylamine. neutralization, heat of The amount of heat evolved when I g equivalent of an acid is neutralized by 1 g equivalent of a base. For strong acids and strong bases in dilute solution the only reaction which occurs is H -h OH ---> H2O and the heat of neutral-... 

Girard s reagent T is carbohydrazidomethyltrimethylammonium chloride (I) and is prepared by the reaction of the quaternary ammonium salt formed from ethyl chloroacetate and trimethylamine with hydrazine hydrate in alco-hoUc solution ... 

The higjily water-soluble dienophiles 2.4f and2.4g have been synthesised as outlined in Scheme 2.5. Both compounds were prepared from p-(bromomethyl)benzaldehyde (2.8) which was synthesised by reducing p-(bromomethyl)benzonitrile (2.7) with diisobutyl aluminium hydride following a literature procedure2.4f was obtained in two steps by conversion of 2.8 to the corresponding sodium sulfonate (2.9), followed by an aldol reaction with 2-acetylpyridine. In the preparation of 2.4g the sequence of steps had to be reversed Here, the aldol condensation of 2.8 with 2-acetylpyridine was followed by nucleophilic substitution of the bromide of 2.10 by trimethylamine. Attempts to prepare 2.4f from 2.10 by treatment with sodium sulfite failed, due to decomposition of 2.10 under the conditions required for the substitution by sulfite anion. 

Oxidative processes can also be used to prepare DMF. For example, it can be produced from tetraoxane (a source of formaldehyde (qv)), oxygen, and dimethylamine over Pd—AI2O2 (24) or from trimethylamine and oxygen ia the presence of a metal haUde catalyst (25). 

Bitumen Ionomers. Moisture-resistant asphalts (qv) have been prepared by reaction of metal oxides with acid-functionalized bitumens (75). Maleic anhydride or sulfur trioxide/trimethylamine complexes have been used successfully for introduction of acid groups into asphaltic bitumens. 

QuaterniZation. Choline chloride [67-48-1] was prepared ia nearly quantitative yield by the reaction of trimethylamine [121-44-8] with ethylene chlorohydrin at 90—105°C and 981—1471 kPa (10—15 kg/cm ) pressure (44). Precursors to quaternary ammonium amphoteric surfactants have been made by reaction of ethylene chlorohydrin with tertiary amines containing a long chain fatty acid group (45). 

Caution This preparation should be carried out in a hood since trimethylamine is evolved. 

A solution of 10.0 g. (0.25 mole) of sodium hydroxide in 250 ml. of water is prepared in a 1-1. round-bottomed flask equipped with a reflux condenser and a mechanical stirrer. Twenty-five grams (0.065 mole) of N,N-dimethylaminomethylferrocene methiodide is added to the solution. The resulting suspension is heated to reflux temperature with stirring. At this point the solid is in solution. Within 5 minutes oil starts to separate from the solution and trimethylamine starts to come off. At the end of 3.5 hours, at which time the evolution of the amine has virtually ceased, the reaction mixture is allowed to cool to room temperature. The oil generally crystallizes during the cooling. The mixture is stirred with 150 ml. of ether until the oil or solid is all dissolved in the ether. The ether layer is separated in a separatory funnel and the aqueous layer is extracted with two additional 150-ml. portions of ether. The combined ether extracts are washed once with water and dried over sodium sulfate. 

Choline, a component of the phospholipids in cell membranes, can be prepared by Sn2 reaction of trimethylamine with ethylene oxide. Show the structure of choline, and propose a mechanism for the reaction. 

Trimethylamine oxide is normally available as a hydrate, and for the present preparation it is necessary to convert it to its anhydrous form. A convenient way of doing this is as follows. A solution of 45.0 g. of trimethylamine oxide dihydrate (supplied by Beacon Chemicals) is dissolved in 300 ml. of warm dimethyl-formamide and placed in a three-necked flask set up for distillation. At atmospheric pressure the flask is heated and solvent distilled off until the boiling point reaches 152-153°. Then the pressure is reduced using a water aspirator, and the remainder of the solvent is distilled. At the end of the distillation the temperature of the bath is slowly raised to 120°. The residual anhydrous trimethylamine oxide (30 g.) can be dissolved in 100 ml. of chloroform and may remain in the same flask for use in the present preparation. 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

Although this material contains a small amount of the symmetrical dihydrazide, which is not easily eliminated on crystallization, it is entirely satisfactory for use as a reagent for the isolation of ketones. A purer product, m. p. 192°, with decomposition, can be obtained by adding the solution prepared from ethyl chloroacetate and trimethylamine to an alcoholic solution containing a considerable excess of the hydrazine hydrate. 

Organic derivatives of ammonia are called amines. Because nitrogen is trivalent, amines can be primary (attached to one carbon), secondary (attached to two carbons), or tertiary. All amines are basic, and their strength as bases increases with the number of alkyl groups attached to the nitrogen that is, methyl amine is a stronger base than ammonia and trimethylamine is stronger than dimethylamine. Amines can be prepared from ammonia and an alkyl halide ... 

Grafstein, D., and C. Vogel The Chemistry of Alane, VI. Preparation of an Aluminium Difluoramide from Trimethylamine-Alane and Difluor-amine. J. Amer. chem. Soc. 88, 1576 (1966). 

As described previously, the Co-mediated carbonylahve Co-cydization of an alkyne and an alkene, is a very powerful procedure in the preparation of cyclopen-tenones [268], However, depending on the reaction conditions it also allows the preparation of 1,3-dienes, which may be intercepted by a Diels-Alder reaction, as described by Carretero and coworkers [285]. As expected, reaction of 6/4-28 with Co2(CO)8 in refluxing acetonitrile led exclusively to the diastereomeric cyclopen-tenones 6/4-29 and 6/4-30 as a 59 41 mixture. However, using trimethylamine-N-... 

Oxidation of 1-boraadamantane THF complex 42 with H2O2 in basic media <1979IZV2544> or by trimethylamine iV-oxide dihydrate <2003JA12179, 20010L3063> gave rise to the triol, m, r-l,3,5-tris(hydroxymethyl)cyclohexane 43. The triol 44 was also prepared from the adduct 45 using the first procedure (Scheme 11) <1979IZV2724>. 

The reactions with ruthenium carbonyl catalysts were carried out in pressurized stainless steel reactors glass liners had little effect on the activity. When trimethylamine is used as base, Ru3(CO) 2> H Ru4(CO) 2 an< H2Ru4(CO)i3 lead to nearly identical activities if the rate is normalized to the solution concentration of ruthenium. These results suggest that the same active species is formed under operating conditions from each of these catalyst precursors. The ambient pressure infrared spectrum of a typical catalyst solution (prepared from Ru3(CO)i2> trimethylamine, water, and tetrahydrofuran and sampled from the reactor) is relatively simple (vq q 2080(w), 2020(s), 1997(s), 1965(sh) and 1958(m) cm ). However, the spectrum depends on the concentration of ruthenium in solution. The use of Na2C(>3 as base leads to comparable spectra. 

The nitroso-group in the p-position has a remarkable influence in making possible the hydrolytic removal of the dimethylamino group from the benzene ring. The reaction is used technically for the preparation of secondary amines. (Trimethylamine is obtained by heating ammonium chloride with formaldehyde.)... 

---