Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thermoset polymer composite

Details are given of the development of energy and material recycling processes for thermosetting polymer composites. Applications in the cement industry and in coal fired fluidised bed combustion plants are discussed. 3 refs. [Pg.103]

A review is presented of the electrical properties of polymers filled with different types of conducting particles. Following a theoretical description of a general effective media equation, experimental conductivity-volume fraction data for thermoplastic filled with vanadium oxide particles as well as thermosetting polymer composites, were fitted to the equation. The calculated property-related parameters in the equation are discussed. Data are given for PVC, HDPE, LLDPE, LDPE, and epoxy resin. 12 refs. [Pg.136]

While thermoplastic polymers can also find applications in load bearing stmcmres, particularly for thermoplastic polymers that have very high melting temperatures, thermosetting polymers have dominated the application in load bearing, fiber reinforced polymer composite structures. Therefore, this book will focus on thermosetting polymer composites. [Pg.3]

Damage in Fiber Reinforced Thermosetting Polymer Composite Structures... [Pg.3]

Fiber reinforced thermosetting polymer composites have been used in the form of laminate, sandwich, grid stiffened, stitched, Z-pinned, three-dimensional (3-D) woven fabric, and hybrid structures. In addition to carrying the designed static/dynamic loads, most composite stmcmres experience some kind of low or high velocity impact incidents during their life cycle. A low velocity impact is not uncommon. For example, dropping a tool on to a composite stmcmre... [Pg.3]

Li, G., Ajisafe, O., and Meng, H. (2013) Effect of strain hardening of shape memory polymer fibers on healing efficiency of thermosetting polymer composites. Polymer, 54, 920-928. [Pg.153]

Li, G., Meng, H., and Hu, J. (2012) Healable thermoset polymer composite embedded with stimuli-responsive fibers. Journal of the Royal Society Interface, 9, 3279-3287. [Pg.153]

Figure 7.23 Closing of the macroscopic crack due to shape recovery of the SMP grid skeleton through localized heating (a) an SMP orthogrid stiffened thermoset polymer composite with a macroscopic crack at the center of the central bay and (b) FEA results for the displacement field in the Y direction when stored stresses in SMP fibers are released by a local heating process. The magnified view shows closure of the macroscopic crack. Source [20] Reproduced with permission from the Royal Society... Figure 7.23 Closing of the macroscopic crack due to shape recovery of the SMP grid skeleton through localized heating (a) an SMP orthogrid stiffened thermoset polymer composite with a macroscopic crack at the center of the central bay and (b) FEA results for the displacement field in the Y direction when stored stresses in SMP fibers are released by a local heating process. The magnified view shows closure of the macroscopic crack. Source [20] Reproduced with permission from the Royal Society...
The EUROCOMP Design Code is mainly concerned with glass fibre reinforced thermosetting polymer composites. Properties of the basic materials are given in Chapter 3 and of typical composites in Chapter 4. This section of the EUROCOMP Handbook will therefore deal primarily with those composites. However, it is desirable that the composite be compared with some of the alternative options that are available. [Pg.244]

Sisal Fiber-Reinforced Thermoset Polymer Composite... [Pg.619]

Physical and Mechanical Properties of Chemically Modified Sisal Fiber-Reinforced Thermoset Polymer Composite... [Pg.626]

D. Cho, and H.S. Lee, Eflect of liber surface modification on the interfacial and mechanical properties of kenaf fiber-reinforced thermoplastic and thermosetting polymer composites. Compos. Interface 16(7-9), 711-729 (2009). [Pg.520]

Zobeiry, N., Vaziri, R. and Poursartip, A., Computationally efficient pseudo-vis-coelastic models for evaluation of residual stresses in thermoset polymer composites during cure . Composites Part A Applied Science and Manufacturing, 41(2), 2010, 247-256. [Pg.434]

Kim, C. Teng, H. Tucker, C. L. White, S. R. 1995. The Continuous Curing Process for Thermoset Polymer Composites. Part 1 Modeling and Demonstration, J. Comp. Mater. 29, 1222-1253. [Pg.371]

Kaushik V and Raghavan J (2010) Experimental study of tool-interaction during autoclave processing of thermoset polymer composite structures, Composites Part A 41 1210-1218,... [Pg.33]

See other pages where Thermoset polymer composite is mentioned: [Pg.292]    [Pg.106]    [Pg.388]    [Pg.1]    [Pg.3]    [Pg.3]    [Pg.3]    [Pg.13]    [Pg.14]    [Pg.213]    [Pg.293]    [Pg.308]    [Pg.314]    [Pg.351]    [Pg.351]    [Pg.356]    [Pg.380]    [Pg.388]    [Pg.325]    [Pg.336]    [Pg.590]    [Pg.626]    [Pg.70]    [Pg.119]    [Pg.271]   
See also in sourсe #XX -- [ Pg.619 , Pg.626 , Pg.627 ]



SEARCH



Composites thermosets

Composites thermosetting

Compositions thermoset

Thermoset composites

Thermosetting composition

Thermosetting polymers

© 2024 chempedia.info