Temperatures boron carbides

Most borides are chemically inert in bulk form, which has led to industrial applications as engineering materials, principally at high temperature. The transition metal borides display a considerable resistance to oxidation in air. A few examples of applications are given here. Titanium and zirconium diborides, alone or in admixture with chromium diboride, can endure temperatures of 1500 to 1700 K without extensive attack. In this case, a surface layer of the parent oxides is formed at a relatively low temperature, which prevents further oxidation up to temperatures where the volatility of boron oxide becomes appreciable. In other cases the oxidation is retarded by the formation of some other type of protective layer, for instance, a chromium borate. This behavior is favorable and in contrast to that of the refractory carbides and nitrides, which form gaseous products (carbon oxides and nitrogen) in air at high temperatures. Boron carbide is less resistant to oxidation than the metallic borides. 

Gaseous boric acid removes a boron oxide film. The rates of formation and removal of the B2O3 film are equal at 550-600°C in air with a dew point of 25-70°C and at 650°C with a dew point of 88°C. At higher temperatures, B2O3 is formed at a higher rate than it is removed by the interaction with water vapor. Therefore, at low temperatures boron carbide is oxidized with water vapor more rapidly than with dry air, at high temperatures the situation is quite the opposite [2]. 

Hafnium Boride. Hafnium diboride [12007-23-7] HfB2, is a gray crystalline soHd. It is usually prepared by the reaction of hafnium oxide with carbon and either boron oxide or boron carbide, but it can also be prepared from mixtures of hafnium tetrachloride, boron trichloride, and hydrogen above 2000°C, or by direct synthesis from the elements. Hafnium diboride is attacked by hydrofluoric acid but is resistant to nearly all other reagents at room temperature. Hafnium dodecaboride [32342-52-2] has been prepared by direct synthesis from the elements (56). 

Another important function of metallic coatings is to provide wear resistance. Hard chromium, electroless nickel, composites of nickel and diamond, or diffusion or vapor-phase deposits of sUicon carbide [409-21-2], SiC , SiC tungsten carbide [56780-56-4], WC and boron carbide [12069-32-8], B4C, are examples. Chemical resistance at high temperatures is provided by aUoys of aluminum and platinum [7440-06-4] or other precious metals (10—14). 

Ceramics (qv) such as those in Table 12 find high temperature use to over 800°C (32). Advanced ceramics finding interest include alumina, partially stabilized zitconia, siUcon nitride, boron nitride, siUcon carbide, boron carbide, titanium diboride, titanium carbide, and sialon (Si—Al—O—N) (33) (see... 

Preparation. The simplest method of preparation is a combination of the elements at a suitable temperature, usually ia the range of 1100—2000°C. On a commercial scale, borides are prepared by the reduction of mixtures of metallic and boron oxides usiag aluminum, magnesium, carbon, boron, or boron carbide, followed by purification. Borides can also be synthesized by vapor-phase reaction or electrolysis. 

Boron and carbon form one compound, boron carbide [12069-32-8] B C, although excess boron may dissolve ia boron carbide, and a small amount of boron may dissolve ia graphite (5). Usually excess carbon appears as graphite, except for the special case of boron diffused iato diamonds at high pressures and temperatures, eg, 5 GPa (50 kbar) and 1500°C, where boron may occupy both iaterstitial and substitutional positions ia the diamond lattice, a property utilized ia synthetic diamonds (see Carbon, diamond, synthetic). 

Boron Triiodide. Boron ttiiodide is not manufactured on a large scale. Small-scale production of BI from boron and iodine is possible in the temperature range 700—900°C (70—72). Excess I2 can be removed as Snl by reaction with Sn, followed by distillation (71). The reaction of metal tetrahydroborates and I2 is convenient for laboratory preparation of BI (73,74). BI can also by synthesized from B2H and HI in a furnace at 250°C (75), or by the reaction of B with excess Agl or Cul between 450—700°C, under vacuum (76). High purity BI has been prepared by the reaction of I2 with mixtures of boron carbide and calcium carbide at elevated temperatures. 

Control of the nuclear chain reaction in a reactor is maintained by the insertion of rods containing neutron absorbing materials such as boron, boron carbide, or borated steel. In state-of-the-art high temperature reactor designs, such as the Gas... 

Carbide-based cermets have particles of carbides of tungsten, chromium, and titanium. Tungsten carbide in a cobalt matrix is used in machine parts requiring very high hardness such as wire-drawing dies, valves, etc. Chromium carbide in a cobalt matrix has high corrosion and abrasion resistance it also has a coefficient of thermal expansion close to that of steel, so is well-suited for use in valves. Titanium carbide in either a nickel or a cobalt matrix is often used in high-temperature applications such as turbine parts. Cermets are also used as nuclear reactor fuel elements and control rods. Fuel elements can be uranium oxide particles in stainless steel ceramic, whereas boron carbide in stainless steel is used for control rods. 

Chemical Resistance. Boron carbide resists oxidation in air up to 600°C due to the formation of a film of B2O3. Its chemical resistance is generally excellent although it reacts with halogens at a high temperature. 

Boron carbide is prepared by reduction of boric oxide either with carbon or with magnesium in presence of carbon in an electric furnace at a temperature above 1,400°C. When magnesium is used, the reaction may be carried out in a graphite furnace and the magnesium byproducts are removed by treatment with acid. 

---