Target number

Increasing the chosen value of process energy consumption also increases all temperature differences available for heat recovery and hence decreases the necessary heat exchanger surface area (see Fig. 6.6). The network area can be distributed over the targeted number of units or shells to obtain a capital cost using Eq. (7.21). This capital cost can be annualized as detailed in App. A. The annualized capital cost can be traded off against the annual utility cost as shown in Fig. 6.6. The total cost shows a minimum at the optimal energy consumption. 

Incentive measures are generally used to draw attention to PSM and ESH performance issues that are, to some extent, controlled by worker behavior or management attention. These measures are frequently used for distributing incentive awards or at-risk pay when particular targets are met, for example 1 million hours without an injury or a target number of changes processed correctly. Whether your company uses incentive measures and awards is a matter of corporate practice. 

The target number of commodity samples to be obtained in the OPMBS was 500, as determined using statistical techniques. A sample size of 500 provided at least 95% confidence that the 99th percentile of the population of residues was less than the maximum residue value observed in the survey. In other words, a sample size of 500 was necessary to estimate the upper limit of the 95% confidence interval around the 99th percentile of the population of residues. 

Once the target number of samples was defined, the frequency of collection and the number of samples to be collected on each collection date were determined, based on an overall total sampling period of 1 year. The sampling plan specified collection every other week, primarily to accommodate the workload at the analytical laboratories. Sampling had to occur early in the week to preclude problems with shipping samples over the weekend. With these considerations in place, specific dates for collection of commodity samples could readily be set. 

Target number of twitches depends on patient s condition and depth of sedation... 

Disease Target Number in Development Disease Target Number in Development... 

Assuming a quasiuniform power distribution in the throughput or in the volume, a characteristic length of the dispersion space becomes irrelevant. In the relevance list, Equation (66), the parameter d must be cancelled. The target number = 32/ must be dropped and the dimensionless numbers La and Oh must be built by J32 instead of d. At given and constant material conditions pjpd, 9, Ci = const.), the process characteristics will be represented in the following pi space ... 

The government systematically misled the public about the numbers of wolves that would be involved in the reintroduction into Yellowstone Park. The organization Defenders of Wildlife cited thirty-five to forty-five wolves as being the target numbers. 

Our laboratory procedure was similar to that for Miss Z, although a technician generally monitored the equipment rather than I, and the borrowed laboratory was rather uncomfortable compared to the one I had been able to use for the work with Miss Z. Mr. Monroe had two brief OOBEs in the time available for research (this time I had to move across the country and so terminate the research). He reported not being able to control OOBE movements well enough in either one to get a look at the target number, but in one he did report a description of the technician s activities that was suggestive, although not conclusive evidence, of a psi component. 

This expression makes it possible to use dose effect curves to give both target number (m), related to the shoulder on sigmoid curves, and target size (v), related to the final exponential slope. 

The dimensionless number IT does not usually occur as a target number for Ap. It has the disadvantage that it contains the essential physical property, kinematic viscosity v, which is already contained in the process number (which is where it belongs). This disadvantage can easily be overcome by appropriately combining the dimensionless numbers IT and II2. This results in the well-known Euler number... 

In this case, the pi-space consists of a target number (Ne), three process numbers (Q, Fr, Re) and a series of pure material numbers (o , p /p, v /v, S/). 

Since the target number qf is dimensionless, we only have to form one single process number ... 

In the course of extensive measurements on bubble columns with different dimensions [89], the gas hold-up H proved to be directly proportional to the volume-related mass transfer coefficient kLa. For this reason, H will be the target number in the following considerations. 

Finally, once the target number T/AThas been replaced by a temperature number... 

The complete set of 13 pi-numbers therefore consists of target number F ... 

This resolution is characterized by a bandwidth, b (which is as small as possible), and a clearance, s, between the respective bands (which is as large as possible). Both parameters are dependent upon the same influencing variables. The resolution effect is therefore defined as the quotient s/b and is taken as the target number of the process. 

Without the (dimensionless) target number s/b, the dimensional matrix is ... 

The target number is dependent on four process numbers and three pure material numbers. Since the rotation of the inner cylinder generates a negligible heat of agitation , the last number, the Brinkman number, can be considered to be irrelevant and can therefore be deleted. 

DNA source Vector Number of Screening target Number of Ref. 

PCR amplicon number to target number in the early phases, such a quantitative... 

---