Co-workers behavior

J. C. BuzzeU, Jr. and co-workers. Behavior of Organic Chemicals in the Mquatic Environment, Part III—Behavior in Merobic Treatment Systems (Activated Sludge), Association of Manufacturing Chemists, Washington, D.C., 1969, pp. 26—31. 

Figure 4.1 illustrates the nature of a job s safety risk profile, and what an employee can potentially encounter when they begin a new job. Education, experience, and training can prepare a new employee for normal and known safety risks. However, a number of other factors can add safety risks to a job. Figure 4.1 shows a number of these factors equipment safety issues, task assignment, workload and performance requirements, scheduling and work hours, environmental variance, co-worker behavior, supervision, and employee silence and safety voice. These... 

Co-worker behavior Are the characteristics of the new employee s co-workers being considered when they are assigned to a work group or team Where possible assign new employees to work groups that have experienced (senior) co-workers... 

Co-workers reactions to new employees have been termed compensatory behaviors (Geller et al. 1996). These are behaviors which attempt to compensate for the fact that the employee is new to the job, and needs familiarizing with all aspects of the job. Of course familiarization is required in both directions the new employee will need to become familiar with all aspects of the job, including their co-workers behavior and attitudes, and co-workers will need to become familiar with the new employee s behavior and attimdes. The latter is particularly important for co-worker safety. New employees can be somewhat unpredictable in their behavior due to a desire to be helpful (Burt et al. 2014). Chapter 8 focuses specifically on helping behaviors which new employees may engage in and the risks these may pose to co-workers. In addition to unexpected helping behaviors, new employees can be unpredictable in how they work, and co-workers need to be veiy mindful of this. 

Relaxations in the double layers between two interacting particles can retard aggregation rates and cause them to be independent of particle size [101-103]. Discrepancies between theoretical predictions and experimental observations of heterocoagulation between polymer latices, silica particles, and ceria particles [104] have promptetl Mati-jevic and co-workers to propose that the charge on these particles may not be uniformly distributed over the surface [105, 106]. Similar behavior has been seen in the heterocoagulation of cationic and anionic polymer latices [107]. 

Stem layer adsorption was involved in the discussion of the effect of ions on f potentials (Section V-6), electrocapillary behavior (Section V-7), and electrode potentials (Section V-8) and enters into the effect of electrolytes on charged monolayers (Section XV-6). More speciflcally, this type of behavior occurs in the adsorption of electrolytes by ionic crystals. A large amount of wotk of this type has been done, partly because of the importance of such effects on the purity of precipitates of analytical interest and partly because of the role of such adsorption in coagulation and other colloid chemical processes. Early studies include those by Weiser [157], by Paneth, Hahn, and Fajans [158], and by Kolthoff and co-workers [159], A recent calorimetric study of proton adsorption by Lyklema and co-workers [160] supports a new thermodynamic analysis of double-layer formation. A recent example of this is found in a study... 

Surfactants have also been of interest for their ability to support reactions in normally inhospitable environments. Reactions such as hydrolysis, aminolysis, solvolysis, and, in inorganic chemistry, of aquation of complex ions, may be retarded, accelerated, or differently sensitive to catalysts relative to the behavior in ordinary solutions (see Refs. 205 and 206 for reviews). The acid-base chemistry in micellar solutions has been investigated by Drummond and co-workers [207]. A useful model has been the pseudophase model [206-209] in which reactants are either in solution or solubilized in micelles and partition between the two as though two distinct phases were involved. In inverse micelles in nonpolar media, water is concentrated in the micellar core and reactions in the micelle may be greatly accelerated [206, 210]. The confining environment of a solubilized reactant may lead to stereochemical consequences as in photodimerization reactions in micelles [211] or vesicles [212] or in the generation of radical pairs [213]. 

An important industrial example of W/O emulsions arises in water-in-crude-oil emulsions that form during production. These emulsions must be broken to aid transportation and refining [43]. These suspensions have been extensively studied by Sjoblom and co-workers [10, 13, 14] and Wasan and co-workers [44]. Stabilization arises from combinations of surface-active components, asphaltenes, polymers, and particles the composition depends on the source of the crude oil. Certain copolymers can mimic the emulsion stabilizing fractions of crude oil and have been studied in terms of their pressure-area behavior [45]. 

Foam rheology has been a challenging area of research of interest for the yield behavior and stick-slip flow behavior (see the review by Kraynik [229]). Recent studies by Durian and co-workers combine simulations [230] and a dynamic light scattering technique suited to turbid systems [231], diffusing wave spectroscopy (DWS), to characterize coarsening and shear-induced rearrangements in foams. The dynamics follow stick-slip behavior similar to that found in earthquake faults and friction (see Section XU-2D). 

A study by Bames and co-workers of the equilibrium spreading behavior of dimyristol phosphatidylcholine (DMPC) reconciles the differences between spreading of bulk solids and dispersions of liposomes [41]. This study shows the formation of multibilayers below the monolayer at the air-water interface. An incipient phase separation, undetectable by microscopy, in DMPC-cholesterol... 

The interest in vesicles as models for cell biomembranes has led to much work on the interactions within and between lipid layers. The primary contributions to vesicle stability and curvature include those familiar to us already, the electrostatic interactions between charged head groups (Chapter V) and the van der Waals interaction between layers (Chapter VI). An additional force due to thermal fluctuations in membranes produces a steric repulsion between membranes known as the Helfrich or undulation interaction. This force has been quantified by Sackmann and co-workers using reflection interference contrast microscopy to monitor vesicles weakly adhering to a solid substrate [78]. Membrane fluctuation forces may influence the interactions between proteins embedded in them [79]. Finally, in balance with these forces, bending elasticity helps determine shape transitions [80], interactions between inclusions [81], aggregation of membrane junctions [82], and unbinding of pinched membranes [83]. Specific interactions between membrane embedded receptors add an additional complication to biomembrane behavior. These have been stud-... 

The first term on the right is the common inverse cube law, the second is taken to be the empirically more important form for moderate film thickness (and also conforms to the polarization model, Section XVII-7C), and the last term allows for structural perturbation in the adsorbed film relative to bulk liquid adsorbate. In effect, the vapor pressure of a thin multilayer film is taken to be P and to relax toward P as the film thickens. The equation has been useful in relating adsorption isotherms to contact angle behavior (see Section X-7). Roy and Halsey [73] have used a similar equation earlier, Halsey [74] allowed for surface heterogeneity by assuming a distribution of Uq values in Eq. XVII-79. Dubinin s equation (Eq. XVII-75) has been mentioned another variant has been used by Bonnetain and co-workers [7S]. 

B. H. Carpenter and co-workers. Specific Air Pollutantsfrom Munitions Processing andTheir Atmospheric Behavior, 4 Vols., Research Triangle Institute, Research Triangle Park, N.C., 1978. 

Fig. 7.11. The consolidation behavior in hot pressing of shock-modified AIN is found by Beauchamp and co-workers to be strongly influenced by shock modification [87B04].

Fig. 7.12. The monoclinic to tetragonal conversion of shock-modified zirconia was studied with DTA by Hammetter and co-workers. The conversion temperature was found to be strongly changed and dependent on shock-modification conditions. The higher-pressure behavior was found to be strongly correlated with reduction in crystallite size [84H01],...

A. Miilier and co-workers [Ber, deut. Chem. Ges. 76, 856 (1943) Ber. deut. chem. Ges. 75, 891 (1942) Acta Chim. Acad. Sci. Hung., in press observed similar behavior with some isobenzopyrylium salts. If warmed in aqueous solution they are transformed into isobenzop5Tapols and these change on warming in ethyl acetate into the isomeric diketoues by ring opening. 

Ravindranath and co-workers studied the electrochemical behavior of 5-amino-2-phenyl-4-arylazo-l,2-dihydro-3//-pyrazol-3-one (90UC864) and 5-methyl-4-arylazo-2-(pyridin-2-ylcarbonyl)-2,4-dihydro-3//-pyrazol-3-(Mie (90IJC895). Similar studies were undertaken by Jain and Damodharan of pyrazol-3-ones 408a-f (95CJC176) (Scheme 94). The underlying rationale for this study on the electrochemical reduction of these biologically important pyrazol-3-ones is that it can lead to information on the reaction routes and mechanisms of biological redox reactions. 

Macaudiere and co-workers performed a comparison of LC and SFC on a polymer based-CSP (Chiralpak OT) [64]. The chromatographic behavior of this CSP seemed to be quite different in SFC than in LC, although satisfactory separations were achieved with both techniques. The chiral recognition mechanisms may be altered by the nature (hexane-based or CO,-based) of the eluent. 

Buchanan and co-workers studied the behavior of various aromatic compounds in antimony(III) molten salts [30]. These salts can act both as mild Lewis acids and allow redox reactions to take place. The Lewis acidity of the melt can be tuned by controlling the concentration of [SbCl2]. Basic melts are formed by addition of a few mol % of a chloride donor such as KCl, whereas acidic melts are formed by addition of chloride acceptors such as AICI3 (Scheme 5.1-11). 

---