Tandem Cycloadditions with Nitronates

One-pot tandem sequences involving 1,4-addition and ISOC as the key steps have been developed for the construction of N and 0 heterocycles as well as of carbocycles [44]. In this sequence, the nitronate arising from 1,4-addition to an a, -unsaturated nitro alkene is trapped kinetically using trimethyl silyl chloride (TMSCl). The resulting silyl nitronate underwent a facile intramolecular 1,3-dipolar cycloaddition with the unsaturated tether (e.g.. Schemes 20-22). 

The asymmetric tandem cycloaddition of the chiral carbohydrate nitroalkene (35) with ethyl vinyl ether involves the initial formation of the nitronate (36) which reacts exclusively with electron-withdrawing alkenes by 3 -I- 2-cycloaddition to yield chiral bicycles (37) and (38) (Scheme 12). ... 

The dipolar cycloaddition of nitronates has been applied to the synthesis of several natural products in the context of the tandem [4+2] / [3 + 2] nitroalkene cycloaddition process. All of these syntheses have focused on the construction of pyrrolidine, pyrrolizidine, and indolizidine alkaloids. For example, the synthesis of ( )-hastanecine (316), a necine alkaloid, involves the elaboration of a p-benzoy-loxynitroalkene 311 via [4 + 2] cycloaddition with a chiral vinyl ether (312) in the presence of a titanium based Lewis acid, to provide the nitronate 313 with high diastereo- and facial selectivity (Scheme 2.30) (69). The dipolar cycloaddition of... 

In general, synthesis of 4-isoxazolines is accomplished via three routes 1,3-dipolar cycloaddition of nitrones to alkynes or by the oximation of a,i -ethylenic ketones, a-alkynic ketones and aldehydes or from the selective reduction of isoxazolium salts. The nitrone (262) underwent tandem cyclo-addition-[2,3]sigmatropic rearrangement with allenyl sulfoxide (263). And it resulted in 4-isoxazoline (264) (Equation (46)) <89TL663>. 

The Denmark laboratory has developed an elegant tandem [4 + 2]/[3 + 2]-cyclo-addition strategy for the synthesis of a variety of alkaloid natural products (96CR137). Nitroethylene (166) readily undergoes a Lewis acid promoted cycloaddition with vinyl ethers that contain a chiral auxiliary group to give nitronates 168... 

Silicon-tethered 1,3-dipolar cycloaddition reactions have been performed to regio- and stereoselectively assemble complex compounds. " A tandem reaction sequence was conducted by first installing the dimethylvinylsilane on 33 (R, R include H, Me, Et, Bu, (CH2)s, n-Ci2H25, Ph, anri-PhCH(OH)) to form intermediate 34 followed by the 1,3-cycloaddition with the cyclic nitronate furnishing 35 in good yield (eq 16). ... 

This notion can be illustrated by example in Scheme 16.3. Intermolecular [4-1-2] cycloaddition between nitroethylene (8) and chiral vinyl ether 9 provides nitronate 10 with very high diastereoselectivity [23]. This intermediate is sufficiently stable to survive an aqueous work up howevCT, it cannot withstand silica gel chromatographic purification. Nevertheless, the nitronate 10 reacts in a tandem mode with dimethyl ftimarate at ambient temperature and the final product, nitroso acetal 12 is isolated in 40% yield. This sequence is used in the total synthesis of (-l-)-macronecine (13). 

Nitronate Facial Selectivity in Intermolecular [3+2] Cycloadditions of Nitronates The majority of asymmetric dipolar cycloadditions of nitronates have been investigated in the context of the tandem [4 + 2]/[3 + 2] cycloadditions of nitroalkenes. With chiral, cyclic nitronates, the facial selectivity is primarily controlled by the steric environment that defines the diastereotopic faces of the nitronate. Nitronates obtained from [4 + 2] cycloadditions with vinyl ethers contain an acetal stereocenter that controls the approach of the dipolarophile. Nitronate 103 (Scheme 16.26) reacts with dimethyl maleate to produce predominantly nitroso acetal distal- QA through a distal approach of the dipolarophile [23]. The proximal approach provided the minor isomer with dr 7/l. Calculations suggest that the distal approach of the dipolarophile that leads directly to a chair-Uke conformation of the six-membered ring is slightly favored over the proximal approach [121]. 

An important feature of these tandem processes is the complementary electronic nature of the [4 + 2] and the [3 + 2] cycloadditions. The former operates under inverse-electron-demand and as such requires an electron-rich dienophile. The latter operates under normal-electron-demand and is more facile with an electron-deficient dipolarophile. As a consequence, both the dienophile and the dipolarophile may be simultaneously present in the reaction mixture or linked to each other and will not lead to cross-reactivity. Tandem cycloadditions that are initiated by the thermal or pressure activated [4 + 2] cycloadditions usually require an excess of the dienophile. Even though this 27t component is electron-rich, it can react further with the nitronate intermediate unless a more reactive, electron-deficient dipolarophile is also present. As a consequence, such tandem cycloadditions may be conducted as cascade tandem processes if all three components are present firom the beginning and react under the same conditions. On the other hand, tandem processes initiated with a Lewis acid activated [4 + 2] cycloaddition often require a work up to decomplex the Lewis acid li om the nitronate, which otherwise would inhibit the next [3 + 2] step. Because this work up constitutes a change of reaction conditions, such processes are usually run as consecutive or even sequential tandem processes, if the dipolarophile is added later. 

Tamura O, Okabe T, Yamaguchi T, Gotanda K, Noe K, Sakamoto M. Studies on tandem transesterification and intramolecular cycloaddition of nitrones. 1. Sequential bicyclization of a -methoxycarbonylnitrones with allyl alcohols. Tetrahedron 1995 51 107-118. 

Denmark advanced a strategy that involves tandem cycloaddition sequences with nitronates for the asymmetric synthesis of alkaloids [73, 74). A camphor-derived auxiliary permits the preparation of chiral enol ethers (cf. 68) as the reacting partners. A noteworthy example of the complex structures that could be generated by use of 68 is illustrated in Scheme 18.15. A hetero-Diels-Alder reaction between 68 and nitronate 67 generated 69 as a 96 4 mixture of endo/exo diastereomers. The adduct then participated in an intramolecular dipolar cycloaddition at elevated temperatures to yield cycloadduct 70 as a single diastereomer (90%). The tricyclic target 72 was obtained in 88 % yield after reductive removal of the chiral auxiliary and lactam formation [74]. 

Although nitrile oxide cycloadditions have been extensively investigated, cycloadditions of silyl nitronates, synthetic equivalent of nitrile oxides in their reactions with olefins, have not received similar attention. Since we found that the initial cycloadducts, hl-silyloxyisoxazolidines, are formed with high degree of stereoselectivity and can be easily transformed into isoxazolines upon treatment with acid or TBAF, intramolecular silylnitronate-olefin cycloadditions (ISOC) have emerged as a superior alternative to their corresponding INOC reactions [43]. Furthermore, adaptability of ISOC reactions to one-pot tandem sequences involving 1,4-addition and ISOC as the key steps has recently been demonstrated [44]. 

Recently, Denmark and coworkers have developed a new strategy for the construction of complex molecules using tandem [4+2]/[3+2]cycloaddition of nitroalkenes.149 In the review by Denmark, the definition of tandem reaction is described and tandem cascade cycloadditions, tandem consecutive cycloadditions, and tandem sequential cycloadditions are also defined. The use of nitroalkenes as heterodienes leads to the development of a general, high-yielding, and stereoselective method for the synthesis of cyclic nitronates (see Section 5.2). These dipoles undergo 1,3-dipolar cycloadditions. However, synthetic applications of this process are rare in contrast to the functionally equivalent cycloadditions of nitrile oxides. This is due to the lack of general methods for the preparation of nitronates and their instability. Thus, as illustrated in Scheme 8.29, the potential for a tandem process is formulated in the combination of [4+2] cycloaddition of a donor dienophile with [3+2]cycload-... 

Inter [4+2]/inter [3+2] The tandem intermolecular [4+2]/intermolecular [3+2] cycloadditions create bicyclic nitroso acetals with up to six stereogenic centers, which can be controlled by the choice of the stereochemistry of each component and the Lewis acids. The nitronate derived from 2-nitrostyrene and 1-trimethylsilyloxycyclohexene reacts with methyl acrylate to give the nitroso acetal in good yield and high diastereoselectivity (Eq. 8.107).154... 

Schreiber and co-workers (436) prepared a library calculated to contain 2.18 million polycyclic compounds through the 1,3-dipolar cycloaddition of a number of nitrones with alkenes supported on TentaGel S NH2 resin (Scheme 1.83). (—)-Shikimic acid was converted into the polymer bound epoxycyclohexenol carboxylic acid 376 (or its enantiomer), coupled to the resin via a photolabile linker developed by Geysen and co-workers (437) to allow release of the products from the resin in the presence of live cells by ultraviolet (UV)-irradiation. A range of iodoaromatic nitrones (377) was then reacted with the ot,p-unsaturation of the polymer-bound amide in the presence of an organotin catalyst, using the tandem esterification/ dipolar cycloaddition methodology developed by Tamura et al. (84,85) Simultaneous cyclization by PyBrop-mediated condensation of the acid with the alcohol... 

Tamura et al. (170-172) discovered that, when reactions of ester-substituted nitrones with allylic alcohols are performed in the presence of an equimolar amount of titanium tetraisopropoxide under heating or at room temperature, transesterification takes place to form new nitrones bearing an inner alkene dipolarophile. The resulting nitrone substrates undergo regio- and stereoselective intramolecular cycloaddition reactions to give the ring-fused isoxazolidines (Scheme 11.52). This tandem transesterification/[3 + 2]-cycloaddition method leads to the selective... 

The tandem transesterification/[3 + 2]-cycloaddition methodology is be a powerful synthetic tool, since it guarantees high diastereoselectivity even under thermal conditions. It has been successfully apphed to synthetic work of the N-terminal amino acid component of Nikkomycin Bz (Scheme 11.53) (173). Thus, the sugar-based oxime is condensed with a glyoxylate hemiacetal to produce a chiral nitrone ester, which is then reacted with ( )-p-niethoxycinnamyl alcohol in the presence of a catalytic amount of TiCU at 100 °C. After the intramolecular cycloaddition, the... 

Achiral ester-substituted nitrones as well as chiral nitrones can be employed in diastereoselective asymmetric versions of tandem transesterification/[3 + 21-cycloaddition reactions, as shown in Scheme 11.54 (174). High diastereoselectivity and excellent chemical yields have been observed in the reaction with a (Z)-allylic alcohol having a chiral center at the a-position in the presence of a catalytic amount of TiCl4- On the other hand, the reaction with an ( )-allylic alcohol having a chiral center at the a-position, under similar conditions, affords very low selectivities. Tamura et al. has solved this problem with a double chiral induction method. Thus, high diastereoselectivity has been attained by use of a chiral nitrone. 

Cyclic alkyl nitronates may be used in tandem [4+2]/[3+2] cycloadditions of nitroalkanes, and this reaction has been extensively studied by Denmark et al. (64,333-335). In recent work, they developed the silicon-tethered heterodiene-alkene 219 (Scheme 12.63). Steric hindrance and the fact that both the nitroalkene and the a,p-unsaturated ester in 219 are electron deficient renders the possibility of self-condensation. Instead, 219 reacts with the electron-rich chiral vinyl ether 220 in the presence of the catalyst 224 to form the intermediate chiral nitronate 221. The tandem reaction proceeds from 221 with an intramolecular 1,3-dipolar cycloaddition to form 222 with 93% de. Further synthetic steps led to the formation of ( )-detoxinine 223 (333). A similar type of tandem reaction has also been applied by Chattopadhyaya and co-workers (336), using 2, 3 -dideoxy-3 -nitro-2, 3 -didehydrothymidine as the starting material (336). 

The addition of ZnBi 2 to die tandem 1,3-azaprotio cyclotransfer-cycloaddition of a ketoxime with divinyl ketone results in rate enhancement and the exclusive formation of l-aza-7-oxabicyclo[3.2.1]octan-3-ones.79 The 1,3-dipolar cycloaddition of 1-aza-l-cyclooctene 1-oxide with alkenes produces the corresponding isoxazolidines in high yields with a minimum of polymeric material.80 The cycloaddition of thiophene-2 -carbaldehyde oxime with acetonitrile and methyl acrylate produces the 1,3-dipolar adduct, substituted isoxazolidines, and not the previously reported 4 + 2-adducts.81 Density functional theory and semi-empirical methods have been used to investigate the 3 + 2-cycloaddition of azoxides with alkenes to produce 1,2,3-oxadiazolidines.82 The 3 + 2-cycloaddition of a-nitrosostyrenes (62) with 1,3-diazabuta-l,3-dienes (63) and imines produces functionalized cyclic nitrones (64) regioselectively (Scheme 22).83... 

The 3 + 2-cycloaddition of nitrile oxides to 2-crotyl-l,3-dithiane 1-oxides produces exclusively 5-acyldihydroisoxazoles.92 Lewis acid addition to 1,3-dipole cycloaddition reactions of mesityl nitrile oxide with a, /i-unsaturated 2-acyl-1,3-dithiane 1-oxides can reverse the sense of induced stereoselectivity.93 The 1,3-dipolar cycloaddition of 4-t-butylbenzonitrile oxide with 6A-acrylainido-6A-deoxy-/i-cyclodextrin (68) in aqueous solution favours the formation of the 4-substituted isoxazoline (69) rather than the 5-substituted regioisomer (Scheme 24).94 Tandem intramolecular cycloadditions of silyl nitronate, synthons of nitrile oxides, yield functionalized hydrofurans.95... 

---