Surface conductivity, electronic

Ishihara A, Tamura M, Ohgi Y, Matsumoto M, Matsuzawa K, Mitsushima S, Imai H, Ota K-1 (2013) Emergence of oxygen reduction activity in partially oxidized tantalum carbonitrides roles of deposited carbon for oxygen reduction-reaction-site creation and surface electron conduction. J Phys Chem C 117 18837-18844... 

AFM measures the spatial distribution of the forces between an ultrafme tip and the sample. This distribution of these forces is also highly correlated with the atomic structure. STM is able to image many semiconductor and metal surfaces with atomic resolution. AFM is necessary for insulating materials, however, as electron conduction is required for STM in order to achieve tiumelling. Note that there are many modes of operation for these instruments, and many variations in use. In addition, there are other types of scaiming probe microscopies under development. 

Figure C1.5.12.(A) Fluorescence decay of a single molecule of cresyl violet on an indium tin oxide (ITO) surface measured by time-correlated single photon counting. The solid line is tire fitted decay, a single exponential of 480 5 ps convolved witli tire instmment response function of 160 ps fwiim. The decay, which is considerably faster tlian tire natural fluorescence lifetime of cresyl violet, is due to electron transfer from tire excited cresyl violet (D ) to tire conduction band or energetically accessible surface electronic states of ITO. (B) Distribution of lifetimes for 40 different single molecules showing a broad distribution of electron transfer rates. Reprinted witli pennission from Lu andXie [1381. Copyright 1997 American Chemical Society.

Fig. 3. An overview of atomistic mechanisms involved in electroceramic components and the corresponding uses (a) ferroelectric domains capacitors and piezoelectrics, PTC thermistors (b) electronic conduction NTC thermistor (c) insulators and substrates (d) surface conduction humidity sensors (e) ferrimagnetic domains ferrite hard and soft magnets, magnetic tape (f) metal—semiconductor transition critical temperature NTC thermistor (g) ionic conduction gas sensors and batteries and (h) grain boundary phenomena varistors, boundary layer capacitors, PTC thermistors.

Flaws in the anodic oxide film are usually the primary source of electronic conduction. These flaws are either stmctural or chemical in nature. The stmctural flaws include thermal crystalline oxide, nitrides, carbides, inclusion of foreign phases, and oxide recrystaUi2ed by an appHed electric field. The roughness of the tantalum surface affects the electronic conduction and should be classified as a stmctural flaw (58) the correlation between electronic conduction and roughness, however, was not observed (59). Chemical impurities arise from metals alloyed with the tantalum, inclusions in the oxide of material from the formation electrolyte, and impurities on the surface of the tantalum substrate that are incorporated in the oxide during formation. 

Most battery electrodes are porous stmctures in which an interconnected matrix of soHd particles, consisting of both nonconductive and electronically conductive materials, is filled with electrolyte. When the active mass is nonconducting, conductive materials, usually carbon or metallic powders, are added to provide electronic contact to the active mass. The soHds occupy 50% to 70% of the volume of a typical porous battery electrode. Most battery electrode stmctures do not have a well defined planar surface but have a complex surface extending throughout the volume of the porous electrode. MacroscopicaHy, the porous electrode behaves as a homogeneous unit. 

The principal cathodic reaction on the upper surface of the membrane is the reduction of Cu " that is formed by the reaction of Cu with dissolved oxygen in the water these Cu ions are provided partly from the diffusion through the pores in the oxide membrane from within the pit and partly from those produced by cathodic reduction (equation 1.154). Lucey s theory thus rejects the conventional large cathode small anode relationship that is invoked to explain localised attack, and this concept of an electronically conducting membrane has also been used by Evans to explain localised attack on steel due to a discontinuous film of magnetite. 

Aluminium is widely applied for decorative and protective requirements, while cadmium , zinc and titanium have been applied to ferrous materials chiefly for their protective value. The method finds particular application in the plating of high-tensile steels used in aviation and rocketry, car fittings and lamp reflectors, and gramophone record master discs, as well as in the preparation of specimens for electron microscopy and in rendering insulated surfaces electrically conducting, e.g. metallising of capacitors and resistors. 

Composite structures that consist of carbon particles and a polymer or plastic material are useful for bipolar separators or electrode substrates in aqueous batteries. These structures must be impermeable to the electrolyte and electrochemical reactants or products. Furthermore, they must have acceptable electronic conductivity and mechanical properties. The physicochemical properties of carbon blacks, which are commonly used, have a major effect on the desirable properties of the conductive composite structures. Physicochemical properties such as the surface... 

A quite different approach was introduced in the early 1980s [44-46], in which a dense solid electrode is fabricated which has a composite microstructure in which particles of the reactant phase are finely dispersed within a solid, electronically conducting matrix in which the electroactive species is also mobile. There is thus a large internal reactant/mixed-conductor matrix interfacial area. The electroactive species is transported through the solid matrix to this interfacial region, where it undergoes the chemical part of the electrode reaction. Since the matrix material is also an electronic conductor, it can also act as the electrode s current collector. The electrochemical part of the reaction takes place on the outer surface of the composite electrode. 

Jacobs et al. [59,925,926] (Fig. 17). While this scheme conveniently summarizes many features of the observed behaviour, a number of variations or modifications of the mechanisms indicated have been proposed. Maycock and Pai Vemeker [924,933] emphasize the possible role of point defects and suggest, on the evidence of conductivity measurements, that the initial step may be the transfer of either a proton or an electron. Boldyrev et al. [46] suggest that proton conduction permits rapid migration of HC104 within the reactant and this undergoes preferential decomposition in distorted regions. More recently, the ease of proton transfer and the mobilities of other species in or on AP crystals have been investigated by a.c. [360] and d.c. [934] conductivity measurements. Owen et al. [934] could detect no surface proton conductivity and concluded that electron transfer was the initial step in decomposition. At the present time, these inconsistencies remain unresolved. 

Although several metals, such as Pt and Ag, can also act as electrocatalysts for reaction (3.7) the most efficient electrocatalysts known so far are perovskites such as Lai-xSrxMn03. These materials are mixed conductors, i.e., they exhibit both anionic (O2 ) and electronic conductivity. This, in principle, can extend the electrocatalytically active zone to include not only the three-phase-boundaries but also the entire gas-exposed electrode surface. 

This study, in conjunction with that discussed in 12.2.1.2, show that when using aqueous electrolytes or Nafion saturated with H20, the induction of NEMCA on finely dispersed noble metal catalysts is rather straightforward. The role of the electronically conducting porous C support is only to conduct electrons and to support the finely dispersed catalyst. The promoting species can reach the active catalyst via the electrolyte or via the aqueous film without having to migrate on the surface of the support, as is the case when using ceramic solid electrolytes. 

Due to its electronic conductivity, polypyrrole can be grown to considerable thickness. It also constitutes, by itself, as a film on platinum or gold, a new type of electrode surface that exhibits catalytic activity in the electrochemical oxidation of ascorbic acid and dopamine in the reversible redox reactions of hydroquinones and the reduction of molecular oxygen iV-substituted pyrroles are excellent... 

---