Sulfite pulping pollution

MARATHON-HOWARD PROCESS. A treatment of waste sulfite liquor from sulfite pulp manufacture In recover chemicals and reduce steam pollution. The waste sulfite is treated with line and precipitates. (I) calcium sulfite for use in preparing fresh cooking acid for the sulfite pulp process, and 121 a basic calcium salt tif ligmn sulfonic acid (lignin sullYmalesi that can be pressed and used as a fuel of used as raw- material for vanillin, lignin plasties, and other chemicals. The remaining liquor with its BOD reduced X() ( is the effluent. 

The requirements for water pollution control have been forcing a shift to concentrating spent sulfite pulping liquor by evaporation, followed by incineration with heat recovery (102). When calcium-base liquor is burned, the sulfur emerges as calcium sulfate and is not available for recycle to the pulping process. The flue gas from such furnaces in Sweden is reported to contain 0.2—0.3% sulfur dioxide, and in one Swedish mill a Bahco wet limestone scrubber is used to treat the gases (115). 

Sulfite paper has a relatively short life span, since residual acid will continue to hydrolyze the cellulose and cause embrittlement. Further sources of acid include aluminum sulfate (which is added together with resin to suppress bleeding or feathering of ink into the paper) and S02 and NO from the atmosphere. Much of the world s library collections and archives will soon be lost as the paper crumbles. Various deacidification treatments (e.g., with ammonia, morpholine, cyclohexylamine carbamate, or diethyl-zinc) have been proposed and tried, but at best they can only halt the process of embrittlement and cannot reverse it.14 With the move to kraft pulping, alkaline peroxide bleaching, and increasing use of precipitated calcium carbonate as a filler, the high quality papers produced today are intrinsically acid free and should also resist subsequent acidification by S02-polluted air fairly well. 

National Emission Standards for Hazardous Air Pollutants for Primary Aluminum Reduction Plants National Emission Standards for Hazardous Air Pollutants for Chemical Recovery Combustion Source at Kraft, Soda, Sulfite, and Stand-Alone Semichemcial Pulp Mills National Emission Standards for Tanks—Level 1 National Emission Standards for Containers National Emission Standards for Surface Impoundments... 

Pollutants for Chemical Recovery Combustion Source at Kraft, Soda, Sulfite, and Stand-Alone Semichemcial Pulp Mills... 

Each of the pulping methods—mechanical, chemimechanical (presoak), semichemical, and the kraft and sulfite chemical processes—produce different types of wastes, so that emission control measures for each should be considered separately. Since the mechanical and kraft chemically based pulping methods dominate the world markets (Table 15.1), the discussion will focus on these two processes. Resource use and pollution control problems of the... 

---